New Tech Global Staffing

Position Title: Marine Electrical Engineer Job Category: Engineering Location Houston, Texas Description: New Tech Global is seeking a Marine Electrical Engineering Lead for a client located in Houston, TX. This is a direct hire role. This candidate should have a strong background in shipboard power systems and marine-classed electrical design to join our growing team developing commercial-scale OCCS systems. They will lead and support the engineering of electrical infrastructure required to power the OCCS system and integrate it within vessel platforms, with a focus on high-reliability, class-compliant, and safety-critical power architectures. This role requires a deep understanding of marine electrical systems, coordination with mechanical and process teams, and the ability to design, document, and plan for installation and commissioning in a dynamic, cross-functional environment. Responsibilities: Design low and medium-voltage marine electrical power systems to support carbon capture equipment (motors, compressors, pumps, control systems). Develop one-line diagrams, load analyses, protection coordination studies, and grounding/bonding strategies compliant with marine class society rules (ABS, DNV, Lloyd's). Prepare marine-class-compliant design documentation including electrical load lists, cable schedules, wiring diagrams, interconnection diagrams, and equipment data sheets. Specify electrical equipment (e.g., switchboards, transformers, VFDs, MCCs, UPS systems) for marine environments and ensure compatibility with onboard generation capacity. Coordinate integration of carbon capture power demands with shipboard electrical distribution and propulsion systems. Perform cable sizing, voltage drop, and heat dissipation calculations for new equipment loads. Generate technical specifications, installation work packages, and vendor requirement documents. Support the development of Functional Design Specifications (FDS), Interface Control Documents (ICDs), and Control Philosophy for power system interfaces. Assist our Marine Certification team with class submittals and responses to surveyor comments. Develop pre-commissioning and commissioning plans for carbon capture electrical systems, including energization procedures and FAT/SAT protocols. Coordinate testing and verification requirements with shipyards, EPCs, and OEMs. Support sea trial preparation and post-commissioning troubleshooting of electrical system performance and safety interlocks. Team planning, recruiting, and managing a marine electrical engineering team. Mentor junior engineers and prioritize team tasks and goals in line with department and company goals. Qualifications: Bachelor's degree in Electrical Engineering or Marine Engineering (Electrical). Minimum 7 years of experience in marine electrical engineering, preferably involving newbuild or retrofit projects for commercial ships or offshore vessels. Deep understanding of marine electrical distribution systems (LV and MV), including main switchboards, emergency power systems, and UPS systems. Familiarity with marine codes and standards (e.g., IEC 60092, IEEE 45, SOLAS, ABS, DNV, IMO). Proficient in power system modeling and analysis tools (ETAP, SKM, or similar). Experience with VFDs, motor starting systems, and harmonics analysis in shipboard environments. Strong working knowledge of insulation resistance monitoring, isolation transformers, and EMC/EMI compliance strategies. Comfortable with CAD tools (e.g., AutoCAD Electrical, etc.) and project documentation platforms (e.g., SharePoint, Autodesk Vault, or similar). Excellent communication and coordination skills for working with cross-functional engineering teams, shipyards, and regulatory bodies. Bonus Experience (Preferred but not required): Master's degree in Electrical Engineering or Marine Engineering (Electrical). Experience with power systems supporting process or chemical systems onboard vessels. Previous work on decarbonization technologies (e.g., carbon capture, exhaust gas cleaning, or alternative fuels). Familiarity with integration of marine automation and control systems (e.g., IAS, PLC-based control). 2+ years building and/or managing an engineering team. PIa08b3b74a5-

Position Title: Construction Materials Testing Project Manager Job Category: Construction Location Tulsa, Oklahoma Description: New Tech Global is looking for a Construction Materials Testing Project Manager for a client based out of Tulsa, OK. General Responsibilities: Essential Roles and Responsibilities: Manage all aspects of a small to medium sized project. Works with client or NAM to define project scope, schedule and budget. Design, communicate, and implement a project plan for completing the project. Leads safety efforts including preparation and compliance with approved safety plan. Take action to resolve operational problems and minimize delays. Identify, develop, and gather the resources to complete the project. This may include preparing calculations, designs, reports and work specifications; developing project schedules, budgets and forecasts; and selecting materials, equipment, project staff, and external contractors. Partner with other departments or offices to secure specialized resources for the project. Conduct meetings and prepare reports to communicate the status of the project. Set priorities, assign tasks, and coordinates project staff to meet project targets and milestones. Coordinates with APR to ensure appropriate oversight is in place and sufficient time allowed for reviews of all critical junctures. Coordinates with accounting for financial management of business intelligence, invoicing and collections Develop understanding and be aware of project-related risk. Be familiar with what could go wrong on a project and how to protect the Company. Be familiar with company risk policies. Lead safety efforts for team and ensure team follows safety rules and guidelines. Responsible for creating and modeling a safe work environment; demonstrates safety practices. Promote pre-task planning for all projects. Responsible for continuous quality monitoring and improvement on projects. Monitor and promote quality standards and practices. Responsible for providing consistent quality standards on project and proposal delivery. Engage APRs on projects at their onset. Requirements: Bachelors degree in technical discipline practices by the Firm including Engineering, Environmental Science or Geology and a minimum of 5 years related experience. Or, in lieu of a degree, a minimum of 9 years related experience. Valid drivers license with acceptable violation history. Preferred Certification: Project Management Professional (PMP) certification preferred. Professional Engineer (PE), Professional Geologist (PG) or similar professional registration/certification relevant to the type of services and projects being managed. PI7392aed70d08-9565 Required Preferred Job Industries Construction

Position Title: Maintenance & Facility Technician Job Category: Maintenance & Inspection Location Attleboro, Massachusetts Description: New Tech Global is looking for a Facility Maintenance Technician in Attleboro, Massachusetts. A qualified candidate will ensure the facility is maintained in a satisfactory condition for all required production and manufacturing operations. This individual is responsible for the upkeep of the facility and should have a variety of skills, such as plumbing, electrical & carpentry. The Facility Maintenance Technician will also maintain, repair and troubleshoot the factory machinery by ensuring minimal down time occurs. Detailed Description • Support all manufacturing lines using mechanical skills to adjust, repair, replace and perform scheduled preventative maintenance for all equipment for optimum operating conditions. • Use mechanical skills when making observations in each situation, followed by a systematic step-by-step method to minimize machine downtime. • Repair and maintain machinery and equipment including but not limited to boilers, scrubbers, chillers, mechanical maintenance, plumbing & troubleshooting, and light electrical maintenance to include facility, building services, waste treatment and production equipment. • Responsible for light electrical maintenance, troubleshooting and repair to include motors, solenoids, fuses, lamps, sensors, and light machine wiring. • Perform plumbing repairs using glued PVC, CPVC, welded polypro, steel plumbing, and flexible tubing and hose as required. • Work with valves, pumps, clutches, belts, and motor troubleshooting, repair and/or replacement. • Organize and maintain spare parts inventory & tools used within the facility. • Required to help maintain all pumps, mixers, and all process equipment in waste tr Follow Company Safety rules and wear Personal Protective Equipment Basic Qualifications • Must have a High School Diploma or GED equivalent. • Strong oral and written communication skills are required. • At least three years' experience in the skilled trades (Machine Maintenance & Facility Maintenance). • Self-motivation to follow through on daily assignments. • Strong analytical skills and fault-finding practicality is required. • Be able to read and understand all manufacturing related component blueprints. Preferred Qualifications • Experience handling and working in an environment with hazardous chemicals such as sulfuric acids, ferric and cupric chlorides, and chlorine. PIcfd45dff5-

Position Title: Construction Materials Testing Technician - Dallas Job Category: Testing Services Location Dallas, Texas Description: New Tech Global is looking for Construction Materials Testing Technicians for a client in Dallas, TX. General Responsibilities: Perform field and/or laboratory testing, observation, and inspection of construction materials (e.g. soils, aggregates, concrete, asphalt, and steel). Communicate with project manager, engineering technicians, client representative, contractors representative and others as applicable regarding the construction site, project requirements, and testing, observation, and inspection requirements and results. Transport material samples with associated identifying documentation to the laboratory for further testing and analysis. Tabulate, prepare, and submit data and observation in the form of written and digital reports as work is performed for daily transmittal to the Project Manager. Maintain and clean equipment, vehicles and work areas. May assist with scheduling and dispatch of Technicians to project sites. Adhere to strict safety standards. Essential Roles and Responsibilities: Performs testing, observation, and inspection as directed in accordance with training and the specified procedures. Provides clear documentation of findings and results. Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager. Communicates information to Project Manager and other personnel as directed by the PM. Has experience and proficiency in multiple areas of field testing and inspection and or laboratory testing May train lower level technicians May lead the activities of other engineering technicians in the laboratory or on larger field projects. Maintains equipment and calibration. Follows safety rules and practices and other safety requirements for all projects. Performs pre-task planning prior to executing work. Report any safety issues or concerns to management. Be responsible for maintaining quality standards on all projects. Requirements: High school diploma or equivalent. Minimum 3-5 years of relevant experience or the equivalent in training and related experience. Experience with laptop computer use and Microsoft Word and Excel Materials ACI certification in one or more of the following areas: Concrete Field Testing Technician Grade I Concrete Strength Testing Technician Certified in radiation safety and Nuclear Density Gauge operation. Steel American Welding Society (AWS) Certified Welding Inspector (CWI), or Structural Steel and/or nondestructive testing services: ASNT Level II Facilities Relevant certification for the services or project requirements (e.g. Registered Roofing Observer (RRO All Successful completion of related internal safety certifications. Valid drivers license with acceptable violation history. Preferred Certification: Certifications in two or more of the following areas: NICET Level II certification in Construction Materials Testing in one or more of the following categories: Asphalt, Concrete, Soils. NICET Level II certification in Geotechnical in one or more of the following categories: Construction, Laboratory, Exploration, Generalist ICC certification in two or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel Bolting, Structural Steel Welding. American Welding Society (AWS) Certified Welding Inspector (CWI) American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT). PIc1eabd9f739a-2909 Required Preferred Job Industries Construction