Bering Straits Native Corporation

SUMMARY Stampede Ventures Inc., a company within the BSNC family is seeking a qualified Construction Manager for the BGNDRF CMIS project in Alamogordo, NM. This position involves advanced construction management tasks and quality control to ensure compliance with plans and specifications. The Construction Manager must have at least three years of experience in construction projects like the BGNDRF Project. BGNDRF projects include: (1) PFAS treatment building expansion, (2) Piping upgrades, (3) Pavement improvements and (4) Evaporation Pond liner replacement and modifications. ESSENTIAL DUTIES & RESPONSIBILITIES The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. • Become familiar with all related contractual documents including construction plans, specifications, quantity estimates, and construction schedules during the construction process and check for compliance with Reclamation engineering standards and procedures. Provide contract document management support. Organize drawing and specifications sets to be up to date and appropriate for inspector use. • Provide submittals administration. Download and file contractor submittals and RFIs into Reclamation's file program, coordinate and communicate about review progress, and provide owner responses to contractors. • Verify elevations and coordinates of installed work or staking against construction drawings. • Attend all construction-related meetings, as appropriate to the position, and document attendance, provide meeting notes, and document action items for Reclamation's CCOR. • Be on-site when CC is on-site to observe and inspect the activities, process, and products of the CC to ensure compliance with plans and specifications. Occasional work outside normal working hours for early mornings, evenings, and weekends may be required if PBRWS construction activities are going on. • Oversee quality control of CC's work and safety for the construction project and observe and inspect Contractor's work and/or task activities including confirmation of work performance, supplies, and materials installed; and that they meet the Government specification's standards. • Assist Reclamation field staff regarding quality control and safety measures for ensuring construction is performed in accordance with contract specifications, • drawings, the CC's safety and health plan, and the Reclamation Safety and Health Standards (RSHS). • Other tasks assigned by the Operations Manager. QUALIFICATIONS - EXPERIENCE, EDUCATION AND CERTIFICATION To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required (Minimum Necessary) Qualifications • Must be proficient in understanding specifications, drawings, drawing redlines, and other contract-related engineering documents. Proficient in inspecting the work product and ensuring compliance with the specifications, drawings, and other contract-related engineering documents. • Proficient with earthwork activities such as excavating, stockpiling, hauling, placement, compaction, and Contractor's QC testing of earthen materials. • Proficient in concrete activities such as formwork, scaffolding, reinforcement, methods of placement and finishing, cold weather protection, curing, and documenting Contractor's QC testing of concrete placements. Must have experience with placement of Controlled Low Strength Materials (CLSM). • Understands industry and Government best management practices for heavy civil construction activities. • Proficient in OSHA and Reclamation Safety and Health Standards (RSHS) regulations and the differences between the two safety requirements (OSHA 30 Hours Construction Training and/or RSHS 32 Hours Training). Base CPR, First Aid, automated external defibrillator (AED), and Bloodborne Pathogens (BBP). Optional: OSHA Hazard Communication, Confined Space, Hearing Conservation, and Fall Protection & Prevention. • Presents a professional demeanor, attentive listener, proactive, works independently with little oversight, engage and actively participate in teams, proficient in communication of ideas, technical subjects, concerns, and ability to provide potential solutions. • Proficient in written and oral communication at a professional level and able to compose written documentation that is professional, thorough, clear, and precise that requires little to no correction. Proficient using MS Office with a focus on Word and Excel, Adobe Acrobat, email, etc. • Mental and physical ability to work the required hours, in ambient weather conditions, and mobilize around construction site. • Proactive and self-motivated. Performs in a professional, responsible manner. Works independently and as a team member and follows industry standards. Demonstrates proficiency in construction projects at managing time efficiently, working independently, and adhering to schedule. NECESSARY PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employee must maintain a constant state of mental alertness at all times. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time. Additionally, the ability to climb up and down ladders, walk on uneven, shifting surfaces, dirt, mud and gravel & up and down hills as well as occasional work in confined spaces. DOT COVERED/SAFETY-SENSITIVE ROLE REQUIREMENTS • This position is not subject to federal requirements regarding Department of Transportation "safety-sensitive" functions. WORK ENVIRONMENT Work Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job. Job is performed both on active construction sites with exposure to all types of weather heat, cold, rain, snow, exposure to dust, dirt and noise, as well as in an office setting with exposure to computer screens and requires extensive use of a computer, keyboard, mouse and multi-line telephone system. Occasional travel may be required. Occasional "off-shift" evening/weekend/holiday work may be required. SUPERVISORY RESPONSIBILITIES • Depending upon workload supervision of additional quality control employees and or subcontracted QC employees may be required. ADDITIONAL QUALIFYING FACTORS As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results. If applicable to the contract, you must also obtain the appropriate clearance levels required and be able to obtain access to military installations. Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer.All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

SUMMARY Stampede Ventures Inc., a company within the BSNC family is seeking a qualified Civil Construction Inspector for the BGNDRF CMIS project in Alamogordo, NM. This position involves construction inspection and quality control to ensure compliance with plans and specifications. The Civil Construction Inspector must have at least two years of experience in construction projects like the BGNDRF Project or can qualify with a two-year degree in construction management or related field in lieu of experience.BGNDRF projects include: (1) PFAS treatment building expansion, (2) Piping upgrades, (3) Pavement improvements and (4) Evaporation Pond liner replacement and modifications. ESSENTIAL DUTIES & RESPONSIBILITIES The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. 1. Become familiar with all related contractual documents including construction plans, specifications, quantity estimates, and construction schedules during the construction process and check for compliance with Reclamation engineering standards and procedures. 2. Verify elevations and coordinates of installed work or staking against construction drawings. 3. Attend all construction-related meetings, as appropriate to the position. , 4. Be on-site when CC is on-site to observe and inspect the activities, process, and products of the CC to ensure compliance with plans and specifications. Occasional work outside normal working hours for early mornings, evenings, and weekends may be required if construction activities are going on. 5. Oversee quality control of CC's work and safety for the construction project and observe and inspect Contractor's work and/or task activities including confirmation of work performance, supplies, and materials installed; and that they meet the Government specification's standards. 6. Assist Reclamation field staff regarding quality control and safety measures for ensuring construction is performed in accordance with contract specifications, drawings, the CC's safety and health plan, and the Reclamation Safety and Health Standards (RSHS). 7. Other tasks assigned by the Construction Manager. QUALIFICATIONS - EXPERIENCE, EDUCATION AND CERTIFICATION To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required (Minimum) Qualifications Must be proficient in understanding specifications, drawings, drawing redlines, and other contract-related engineering documents. Proficient in inspecting the work product and ensuring compliance with the specifications, drawings, and other contract-related engineering documents. Proficient with earthwork activities such as excavating, stockpiling, hauling, placement, compaction, and Contractor's QC testing of earthen materials. Proficient in concrete activities such as formwork, scaffolding, reinforcement, methods of placement and finishing, cold weather protection, curing, and documenting Contractor's QC testing of concrete placements. Must have experience with placement of Controlled Low Strength Materials (CLSM). Understands industry and Government best management practices for heavy civil construction activities. Proficient in OSHA and Reclamation Safety and Health Standards (RSHS) regulations and the differences between the two safety requirements (OSHA 30 Hours Construction Training and/or RSHS 32 Hours Training). Base CPR, First Aid, automated external defibrillator (AED), and Bloodborne Pathogens (BBP). Optional:OSHA Hazard Communication, Confined Space, Hearing Conservation, and Fall Protection & Prevention. Presents a professional demeanor, attentive listener, proactive, works independently with little oversight, engage and actively participate in teams, proficient in communication of ideas, technical subjects, concerns, and ability to provide potential solutions. Proficient in written and oral communication at a professional level and able to compose written documentation that is professional, thorough, clear, and precise that requires little to no correction. Proficient using MS Office with a focus on Word and Excel, Adobe Acrobat, email, etc. Mental and physical ability to work the required hours, in ambient weather conditions, and mobilize around construction site. Proactive and self-motivated. Performs in a professional, responsible manner. Works independently and as a team member and follows industry standards.Demonstrates proficiency in construction projects at managing time efficiently, working independently, and adhering to schedule. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must maintain a constant state of mental alertness at all times. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Essential and marginal functions require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time. Additionally, the ability to climb up and down ladders, walk on uneven, shifting surfaces, dirt, mud and gravel & up and down hills as well as occasional work in confined spaces. DOT COVERED/SAFETY-SENSITIVE ROLE REQUIREMENTS • This position is not subject to federal requirements regarding Department of Transportation "safety-sensitive" functions. WORK ENVIRONMENT Work Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job. Job is performed both on active construction sites with exposure to all types of weather heat, cold, rain, snow, exposure to dust, dirt and noise, as well as in an office setting with exposure to computer screens and requires extensive use of a computer, keyboard, mouse and multi-line telephone system. Occasional travel may be required. Occasional "off-shift" evening/weekend/holiday work may be required. SUPERVISORY RESPONSIBILITIES Depending upon workload supervision of additional quality control employees and or subcontracted QC employees may be required. ADDITIONAL QUALIFYING FACTORS As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results. If applicable to the contract, you must also obtain the appropriate clearance levels required and be able to obtain access to military installations. Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer.All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

SUMMARY Bering Straits Global Innovations, a company within the BSNC family is currently seeking a qualified Construction Estimator for our Colorado Springs, Colorado office. This position is responsible for preparing detailed, responsive cost volume proposals in response to government and private solicitations. Individual must possess the ability to review and extract requirements from formal solicitation documents; solicit and obtain quotes for materials, equipment, and subcontracted tasks, and manipulate large work breakdown structures developed to support task totals; highly proficient with MS Excel to accurately develop and refine complex formulas and linkages on cost spreadsheets. Successful candidates will be familiar with the conceptual planning, preliminary design, design-build process, design- bid-build process, able to work independently and be comfortable interfacing with all members of the design, construction, and management teams.Wage/Salary Range: $100,000 to $125,000 ESSENTIAL DUTIES & RESPONSIBILITIES The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. Review Government Requests for Proposals (RFP) and Invitations for Bid (IFB) to determine specific cost requirements ensuring proposals are prepared timely and in accordance with requirements. Develop formats for cost proposal data to comply with Government requirements and prepare spreadsheets using Microsoft Excel or other estimating software. Ability to develop, refine and format advanced formulas in MS Excel. Ability to develop detailed quantity take offs based on construction drawings and conceptual designs. Develop accurate and detailed cost estimates and be able to distribute specific costs accurately utilizing work breakdown structures or other cost allocation methods. Participate in strategy meetings and provide input on cost related matters as required, including cost strategy for initial proposal and subsequent revisions. Perform cost proposal reviews, evaluating formula integrity and responsiveness to Government RFP, make recommendations on methods, procedures, and techniques for refinement of proposal. Prepare cost/pricing presentations for management as requested/required. Review the scope specified within the RFP from a fully designed bid package and prepare a detailed all-inclusive cost estimate. Review the scope requirements of a conceptual statement of work and prepare a detailed conceptual estimate. Prepare a written scope of work including bid clarifications/assumptions included in the conceptual estimate. Prepare proposal packages and RFQ's and solicit pricing from multiple subcontractors for each division of work per the RFP requirements. Manage pre-bid RFI's and field bid questions from potential subcontractors. Review quantities and ensure there is a fair and reasonable representation of scope. Review the material pricing and validate against industry standards. Prepare detailed breakdown of components and elements of estimates for systems and subsystems (Work Breakdown Schedule (WBS Prepare a construction schedule utilizing both Microsoft Project and Primavera P6 software. Perform other duties as assigned. QUALIFICATIONS - EXPERIENCE, EDUCATION AND CERTIFICATION To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required (Minimum Necessary) Qualifications (applies to both this section and KSAO's) • Proficient with e4Clicks and/or large-scale estimating software • Prior advanced cost proposal and work breakdown development experience is required. • Experience with various contract types including FFP, Design/Build, and Design/Bid/Build Contracts. • Ability to write, review and or edit cost narratives as required. • Experience with On-screen Take-off or other quantitative software. • Demonstrated proficiency utilizing standard MS Office applications (including Excel, PowerPoint, and Online meeting software platforms). • Proficient with other industry estimating databases and other estimating data sources. • Experience with Adobe Acrobat and/or Bluebeam • Experience with Microsoft Project and/or Primavera P6 software. • Ability to produce conceptual estimates, detailed estimates and support negotiation efforts related to each proposal. • Experience in the generation of cost estimates standard for a General Contractor specializing in federal construction projects. • Working knowledge of widely accepted cost estimating methodologies required by owners, consultants and/or contractors. • Demonstrated ability to approach technical issues, identify alternative solutions and solve complex problems. • Experience with development and publications of basis of estimates to support estimates. • Experience creating estimates in response to federal government RFPs, with an emphasis on USACE, is required. Knowledge, Skills, Abilities, and Other Characteristics • Minimum of 10 years of relevant cost estimating experience. • Ability to manage the workload including setting priorities and meeting schedules effectively. • Ability to communicate effectively, orally and in writing. • Comprehensive knowledge of subcontractor/vendor relations and processes. • Must be task oriented, self-motivated with the inherent ability to multitask, work under pressure, meet deadlines and work as team member. • Familiar with RS Means pricing databases and applicable city cost indexes. • Must possess outstanding interpersonal skills as well as excellent oral and written communication skills. Preferred • 7 years federal contracting estimating experience to include contracts and subcontracts. NECESSARY PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employee must maintain a constant state of mental alertness at all times. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time; most of time is spent sitting in a comfortable position with frequent opportunity to move about. DOT COVERED/SAFETY-SENSITIVE ROLE REQUIREMENTS • This position is not subject to federal requirements regarding Department of Transportation "safety-sensitive" functions. WORK ENVIRONMENT Work Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job. The job is performed in an office setting with exposure to computer screens and requires extensive use of a computer, keyboard, mouse, and multi-line telephone system. The work described herein is primarily in a modern office setting. Occasional travel may be required. SUPERVISORY RESPONSIBILITIES • No supervisory responsibilities. ADDITIONAL QUALIFYING FACTORS As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results. If applicable to the contract, you must also obtain the appropriate clearance levels required and be able to obtain access to military installations. Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer.All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

SUMMARY Stampede Ventures, a company within the BSNC family, is currently seeking a qualified, highly motivated individual with DoD contract experience.The candidate will be performing all facets of the Bering Straits East Coast model to include safety and quality control management, submittal tracking, daily reporting, communicating deficiencies to the customer, running multiple sites simultaneously, and other various tasks as assigned.This position is in support of a current contract that supports various DOD locations.Depending on workload, this position may be extended to additional contracts as needed. ESSENTIAL DUTIES & RESPONSIBILITIES The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. Previous Federal DoD contract experience Management of task order projects in the Washington DC region Ability to read drawings / prints. Safety experience in multi-trade construction projects Knowledge of OSHA and EM-385 requirements Experience enforcing corporate or site quality control programs. Written and Oral communication with customer, subcontractors, and internally to provide project updates Knowledge with all aspects of a construction project (electrical, HVAC, Fire Alarm, Fire Suppression, architectural, etc.) NON-ESSENTIAL DUTIES Have existing relationships with Federal government & DoD customers in the DC Metro Region Previous experience working with 8(a) companies Other duties as assigned QUALIFICATIONS - EXPERIENCE, EDUCATION AND CERTIFICATION To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required (Minimum) Qualifications Three years' experience as a quality control manager on industrial or commercial projects Quality Manager with a minimum of 10 years in related work OR BS degree in engineer, architect, or construction management with 5 years of experience as a construction Contractor Quality Control Manager / Contractor Quality Control System Manager / Quality Control Manager. Completed USACE/NAVFAC Construction Quality Management for Contractors (CQM-C) Training with the past 5 years. ICD/ICS 705 training. The course should be in-person and a minimum of 32 hours and include an examination at the end of the training. Successful completion of the course shall be documented by a certificate of completion, or equivalent, provided to the attendee, within ninety (90) days after hire. Experience on projects exceeding $500,000 (specifically HVAC and electrically heavy projects) Experience working with the USACE Must be US Citizen OSHA 30 Certification (can be obtained after employment) Valid Driver's License Current or ability to get a security clearance Knowledge, Skills and Abilities Current favorable National Agency Check with Inquiry (NACI), in accordance with AR 380-67 Valid Driver's License Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values. Knowledge of Local vendor and subcontractor companies. Must be organized and have excellent communication skills. NECESSARY PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees must always maintain a constant state of mental alertness. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking, or standing for prolonged periods of time; most of time is spent sitting in a comfortable position with frequent opportunity to move about. DOT COVERED/SAFETY-SENSITIVE ROLE REQUIREMENTS This position is not subject to federal requirements regarding Department of Transportation "safety-sensitive" functions. WORK ENVIRONMENT Work Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee often works in an office environment.The employee is required to visit job sites regularly and will be subject to a lift and/or move up to 25 pounds.The employee is occasionally required to stand, climb or balance and stoop, kneel, crouch or crawl.During visits to job sites, the employee may be exposed to extreme cold or hot weather conditions. SUPERVISORY RESPONSIBILITIES No supervisory responsibilities will be required for this position. ADDITIONAL QUALIFYING FACTORS As a condition of employment, may be required to pass a pre-employment drug screening, as well as have acceptable reference and background check results to obtain access to military base. Must have reliable transportation to/from work as a necessity and must be able to obtain access to military installations. Shareholder Preference.BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer.All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

SUMMARY Stampede Ventures Inc., a company within the BSNC family is currently seeking a qualified Project Manager for Norfolk/Virginia Beach, Virginia. The Project Manager (PM) is responsible for the execution and management of a full project as required by our contract with the client and managing subcontractors through project completion. In accordance with Company's policies and procedures; and performs additional managerial responsibilities as necessary or assigned. ESSENTIAL DUTIES & RESPONSIBILITIES The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. Independently Plans and organizes projects and sub-projects with complexity Drives and monitors daily progress of project work packages and activities to meet the project schedule with project team members Develops a project schedule and SOV Provides detailed updates to project stakeholders. Organizes and maintains project documentation and artifacts, trackers, and reports. Manages and oversees Definable Features of Work Submittal packages with Superintendent Creates and implements maintenance and continuous improvement efforts to project management processes and procedures. Engages in and actively volunteers for Continuous Improvement projects/tasks. Must follow all required ISO procedures, comply with all work exposure EH&S training requirements Must be able to travel infrequently. Miscellaneous duties assigned. Supports overall project quality and reviews all trade contractors' means and methods in accordance with project contract documents with the Project Superintendent. Reviews and analyzes submittal data on the product specifications, scopes of work, plans and engineer reports to determine the finished product meets the quality and reliability expectancy of the Client. Develops the RFI process to ensure that all RFIs are properly and timely logged and that the information requests are reviewed and then forwarded to the appropriate people. Supports testing programs will be conducted throughout construction to verify that all materials and installations are as specified; in addition to mandatory "milestone" inspections or tests, supports the QC who monitors all aspects of the construction on a daily basis to verify contract compliance. Oversees plans, coordination, and the project program as designed, to ensure continuous production of projects are consistent with established standards Performs random project site audits for all stages in production process and inspects materials for specifications and contract compliance. Interacts effectively with the NAVFAC Quality Control personnel to ensure Previous Federal construction experience is preferred QUALIFICATIONS - EXPERIENCE, EDUCATION AND CERTIFICATION To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required (Minimum Necessary) Qualifications Seven years' experience supporting Federal or commercial projects Must be US Citizen Knowledge, Skills, Abilities, and Other Characteristics Operate in Microsoft Suite Tools Manage Project Schedule in MS Project and P6 Valid Driver's License Knowledge of Local vendors and subcontractor companies. Must be organized and have excellent communication skills Preferred USACE Quality Control Certification OSHA 30 Certification (can be obtained after employment) Current or ability to get a security clearance is preferred Current certifications for First Aid and CPR NECESSARY PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employee must maintain a constant state of mental alertness at all times. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time; most of time is spent sitting in a comfortable position with frequent opportunity to move about. DOT COVERED/SAFETY-SENSITIVE ROLE REQUIREMENTS This position is not subject to federal requirements regarding Department of Transportation "safety-sensitive" functions. This position does perform DOT "safety-sensitive" functions (as defined under 49 CFR Part 40) and is subject to all federal requirements related to Department of Transportation requirements for those performing, or on-call to perform, "safety-sensitive" functions. Employees must provide a valid Commercial Driver's License (CDL) and Medical Examiner's Certificate (MEC). WORK ENVIRONMENT Work Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job. Requires the ability to see, hear, and verbally communicate with co-workers and clients in an office setting and active construction site. While on-site, conditions may require walking on uneven ground, extended periods of standing, and the possible lifting, pushing, or pulling of items weighing up to 40 pounds. The ability to wear personal protective equipment (PPE) is required while visiting construction sites. PPE includes steel-toed boots, hearing and eye protection, hard hat, reflective vests, and protective gloves. SUPERVISORY RESPONSIBILITIES This position supervises employees ADDITIONAL QUALIFYING FACTORS As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results. If applicable to the contract, you must also obtain the appropriate clearance levels required and be able to obtain access to military installations. Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer.All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

SUMMARY Stampede Ventures, a company within the BSNC family, is currently seeking a qualified, highly motivated individual with DoD contract experience.The candidate will be performing all facets of the Bering Straits East Coast model to include quality control management, submittal tracking, daily reporting, communicating deficiencies to the customer, running multiple sites simultaneously, and other various tasks as assigned.This position is in support of a current contract that supports various DOD locations.Depending on workload, this position may be extended to additional contracts as needed. ESSENTIAL DUTIES & RESPONSIBILITIES Previous Federal DoD contract experience Management of task order projects in the Washington DC region Ability to read and communicate with subcontractos about drawings / prints. Safety experience in multi-trade construction projects OSHA 30 and QCM certificates Experience enforcing corporate or site control programs. Written and Oral communication with customer, subcontractors, and internally to provide project updates. Knowledge of all aspects of a construction project (electrical, HVAC, Fire Alarm, Fire Suppression, architectural, etc.) NON-ESSENTIAL DUTIES Have existing experience with Federal government & DoD customers in the MidAtlantic Region Previous experience working with 8(a) companies. Other duties as assigned. QUALIFICATIONS - EXPERIENCE, EDUCATION AND CERTIFICATION Required (Minimum) Qualifications Experience as a Superintendent, Safety Officer and Quality Control Manager on industrial or commercial projects Experience on projects exceeding $500,000 (specifically secure room construction and interior fit-out) Experience working with the USACE Must be US Citizen OSHA 30 Certification and Valid Driver's License Current clearance, or ability to get a security clearance is preferred. Knowledge, Skills and Abilities Current favorable National Agency Check with Inquiry (NACI), in accordance with AR 380-67 Valid Driver's License Shows respect and sensitivity for cultural differences; Educates others on the value of diversity; Promotes a harassment-free environment; Builds a diverse workforce. Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values. Knowledge of Local vendor and subcontractor companies. Must be organized and have excellent communication skills. NECESSARY PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees must always maintain a constant state of mental alertness. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking, or standing for prolonged periods of time; most of time is spent sitting in a comfortable position with frequent opportunity to move about. DOT COVERED/SAFETY-SENSITIVE ROLE REQUIREMENTS This position is not subject to federal requirements regarding Department of Transportation "safety-sensitive" functions. WORK ENVIRONMENT Work Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee often works in an office environment.The employee is required to visit job sites regularly and will be subject to a lift and/or move up to 25 pounds.The employee is occasionally required to stand, climb or balance and stoop, kneel, crouch or crawl.During visits to job sites, the employee may be exposed to extreme cold or hot weather conditions. SUPERVISORY RESPONSIBILITIES Supervising onsite subcontractors and field employees. ADDITIONAL QUALIFYING FACTORS As a condition of employment, may be required to pass a pre-employment drug screening, as well as have acceptable reference and background check results to obtain access to military base. Must have reliable transportation to/from work as a necessity and must be able to obtain access to military installations. Shareholder Preference.BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer.All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

SUMMARY Eagle Eye Electric, a company within the BSNC family, is currently seeking a local and qualified General Construction Superintendent IDIQ Task Order type contract The Superintendent is directly responsible for the safe and efficient execution of the project and will be onsite for the duration of the projects.This includes implementation of the project plans as well as project oversight and coordination with the project team.This position requires a close working relationship with the Project Manager, Site Safety & Health Officer, Foreman, and Quality Control/Quality Assurance Manager (QM), as well as other project team members.The Site Superintendent must have at least 3 years of applicable experience on projects involving civil construction, railroad, utilities, infrastructure, etc.The Site Superintendent is required to possess the ability to prepare written technical reports, covering all aspects of construction activities; ability to track site costs on a daily basis; ability to manage and ensure proper execution of multiple simultaneous subcontracts and/or vendors of varying types and complexity; ability to track site costs routinely; demonstrated ability to mediate with tact when dealing with customers. ESSENTIAL DUTIES & RESPONSIBILITIES The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. Enter the fundamental job duties of the position. ADA Required On-site implementation and coordination of the project plans per the SOW Schedule and execute all phases of construction Estimating experience including RSMeans Attendance at regular internal and external tailgates meetings including daily discussions on project health and safety Preparation of daily reports with Project Manager, Site Safety & Health Officer and QCM Review and processing of project submittals Active role in daily, weekly, and monthly meetings with all on site staff Coordination with on-site subs Other duties as assigned QUALIFICATIONS - EXPERIENCE, EDUCATION AND CERTIFICATION To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required (Minimum Necessary) Qualifications (applies to both this section and KSAO's) Enter qualifications required to perform the job. Must include education and level of experience. High School Degree or equivalent Demonstrated experience with RSMeans pricing A minimum of 3 years in Construction with a preference for Federal/DOD work OSHA 30 Training Knowledge, Skills, Abilities, and Other Characteristics Enter minimum KSAO's required to do the job. Excellent communication skills with internal and external customers Excellent computer skills Skilled in Microsoft Office programs Construction management experience Preferred Federal government or DOD experience in construction First Aid/CPR certified Federal government or DOD experience in construction NECESSARY PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employee must maintain a constant state of mental alertness at all times. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time; most of time is spent sitting in a comfortable position with frequent opportunity to move about. DOT COVERED/SAFETY-SENSITIVE ROLE REQUIREMENTS This position is not subject to federal requirements regarding Department of Transportation "safety-sensitive" functions. WORK ENVIRONMENT Work Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job. Job is performed in an office setting with exposure to computer screens and requires extensive use of a computer, keyboard, mouse, and multi-line telephone system. The work described herein is primarily a modern office setting. Occasional travel may be required. SUPERVISORY RESPONSIBILITIES Hires and supervises direct reports. ADDITIONAL QUALIFYING FACTORS As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results. If applicable to the contract, you must also obtain the appropriate clearance levels required and be able to obtain access to military installations. Shareholder Preference.BSNC gives hiring, promotion, training and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer.All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

SUMMARY Stampede Ventures Inc., a company within the BSNC family is seeking a qualified Construction Management Specialist II for the BGNDRF CMIS project in Alamogordo, NM.Physical work location for this position is in Santa Fe, NM. This position involves advanced construction management tasks and quality control to ensure compliance with plans and specifications. The Construction Management Specialist II must have at least two years of experience in construction projects like the BGNDRF Project or can qualify with a two-year degree in construction management or related field in lieu of experience.BGNDRF projects include: (1) PFAS treatment building expansion, (2) Piping upgrades, (3) Pavement improvements and (4) Evaporation Pond liner replacement and modifications. ESSENTIAL DUTIES & RESPONSIBILITIES The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. Become familiar with all related contractual documents including construction plans, specifications, quantity estimates, and construction schedules during the construction process and check for compliance with Reclamation engineering standards and procedures. Provide contract document management support. Organize drawing and specifications sets to be up to date and appropriate for inspector use. Provide submittals administration. Download and file contractor submittals and RFIs into Reclamation's file program, coordinate and communicate about review progress, and provide owner responses to contractors. Verify elevations and coordinates of installed work or staking against construction drawings. Attend all construction-related meetings, as appropriate to the position, and document attendance, provide meeting notes, and document action items for Reclamation's CCOR. Be on-site when CC is on-site to observe and inspect the activities, process, and products of the CC to ensure compliance with plans and specifications. Occasional work outside normal working hours for early mornings, evenings, and weekends may be required if PBRWS construction activities are going on. Oversee quality control of CC's work and safety for the construction project and observe and inspect Contractor's work and/or task activities including confirmation of work performance, supplies, and materials installed; and that they meet the Government specification's standards. Assist Reclamation field staff regarding quality control and safety measures for ensuring construction is performed in accordance with contract specifications, drawings, the CC's safety and health plan, and the Reclamation Safety and Health Standards (RSHS). Other tasks assigned by the Construction Manager Level - III. QUALIFICATIONS - EXPERIENCE, EDUCATION AND CERTIFICATION To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required (Minimum Necessary) Qualifications • Must be proficient in understanding specifications, drawings, drawing redlines, and other contract-related engineering documents. Proficient in inspecting the work product and ensuring compliance with the specifications, drawings, and other contract-related engineering documents. • Proficient with earthwork activities such as excavating, stockpiling, hauling, placement, compaction, and Contractor's QC testing of earthen materials. • Proficient in concrete activities such as formwork, scaffolding, reinforcement, methods of placement and finishing, cold weather protection, curing, and documenting Contractor's QC testing of concrete placements. Must have experience with placement of Controlled Low Strength Materials (CLSM). • Understands industry and Government best management practices for heavy civil construction activities. • Proficient in OSHA and Reclamation Safety and Health Standards (RSHS) regulations and the differences between the two safety requirements (OSHA 30 Hours Construction Training and/or RSHS 32 Hours Training). Base CPR, First Aid, automated external defibrillator (AED), and Bloodborne Pathogens (BBP). Optional:OSHA Hazard Communication, Confined Space, Hearing Conservation, and Fall Protection & Prevention. • Presents a professional demeanor, attentive listener, proactive, works independently with little oversight, engage and actively participate in teams, proficient in communication of ideas, technical subjects, concerns, and ability to provide potential solutions. • Proficient in written and oral communication at a professional level and able to compose written documentation that is professional, thorough, clear, and precise that requires little to no correction. Proficient using MS Office with a focus on Word and Excel, Adobe Acrobat, email, etc. • Mental and physical ability to work the required hours, in ambient weather conditions, and mobilize around construction site. • Proactive and self-motivated. Performs in a professional, responsible manner. Works independently and as a team member and follows industry standards.Demonstrates proficiency in construction projects at managing time efficiently, working independently, and adhering to schedule. NECESSARY PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employee must maintain a constant state of mental alertness at all times. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time. Additionally, the ability to climb up and down ladders, walk on uneven, shifting surfaces, dirt, mud and gravel & up and down hills as well as occasional work in confined spaces. DOT COVERED/SAFETY-SENSITIVE ROLE REQUIREMENTS • This position is not subject to federal requirements regarding Department of Transportation "safety-sensitive" functions. WORK ENVIRONMENT Work Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job. Job is performed both on active construction sites with exposure to all types of weather heat, cold, rain, snow, exposure to dust, dirt and noise, as well as in an office setting with exposure to computer screens and requires extensive use of a computer, keyboard, mouse and multi-line telephone system. Occasional travel may be required. Occasional "off-shift" evening/weekend/holiday work may be required.SUPERVISORY RESPONSIBILITIES Depending upon workload supervision of additional quality control employees and or subcontracted QC employees may be required. ADDITIONAL QUALIFYING FACTORS As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results. If applicable to the contract, you must also obtain the appropriate clearance levels required and be able to obtain access to military installations. Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer.All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

SUMMARY Stampede Ventures Inc., a company within the BSNC family is seeking a qualified Construction Management Specialist II for the PBRWS CMIS Contract in Santa Fe County, NM. This position involves advanced construction management tasks and quality control to ensure compliance with plans and specifications. The Construction Management Specialist II must have at least two years of experience in construction projects like the PBRWS Project or can qualify with a two-year degree in construction management or related field in lieu of experience. ESSENTIAL DUTIES & RESPONSIBILITIES The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are notintended to reflect all duties performed within the job. Other duties may be assigned. Become familiar with all related contractual documents including construction plans, specifications, quantity estimates, and construction schedules during the construction process and check for compliance with Reclamation engineering standards and procedures. Provide contract document management support. Organize drawing and specifications sets to be up to date and appropriate for inspector use. Provide submittals administration. Download and file contractor submittals and RFIs into Reclamation's file program, coordinate and communicate about review progress, and provide owner responses to contractors. Verify elevations and coordinates of installed work or staking against construction drawings. Attend all construction-related meetings, as appropriate to the position, and document attendance, provide meeting notes, and document action items for Reclamation's CCOR. Be on-site when CC is on-site to observe and inspect the activities, process, and products of the CC to ensure compliance with plans and specifications. Occasional work outside normal working hours for early mornings, evenings, and weekends may be required if PBRWS construction activities are going on. Oversee quality control of CC's work and safety for the construction project and observe and inspect Contractor's work and/or task activities including confirmation of work performance, supplies, and materials installed; and that they meet the Government specification's standards. Assist Reclamation field staff regarding quality control and safety measures for ensuring construction is performed in accordance with contract specifications, drawings, the CC's safety and health plan, and the Reclamation Safety and Health Standards (RSHS). Other tasks assigned by the Construction Manager Level - III. QUALIFICATIONS - EXPERIENCE, EDUCATION AND CERTIFICATION To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required (Minimum) Qualifications Must be proficient in understanding specifications, drawings, drawing redlines, and other contract-related engineering documents. Proficient in inspecting the work product and ensuring compliance with the specifications, drawings, and other contract-related engineering documents. Proficient with earthwork activities such as excavating, stockpiling, hauling, placement, compaction, and Contractor's QC testing of earthen materials. Proficient in concrete activities such as formwork, scaffolding, reinforcement, methods of placement and finishing, cold weather protection, curing, and documenting Contractor's QC testing of concrete placements. Must have experience with placement of Controlled Low Strength Materials (CLSM). Understands industry and Government best management practices for heavy civil construction activities. Proficient in OSHA and Reclamation Safety and Health Standards (RSHS) regulations and the differences between the two safety requirements (OSHA 30 Hours Construction Training and/or RSHS 32 Hours Training). Base CPR, First Aid, automated external defibrillator (AED), and Bloodborne Pathogens (BBP). Optional:OSHA Hazard Communication, Confined Space, Hearing Conservation, and Fall Protection & Prevention. Presents a professional demeanor, attentive listener, proactive, works independently with little oversight, engage and actively participate in teams, proficient in communication of ideas, technical subjects, concerns, and ability to provide potential solutions. Proficient in written and oral communication at a professional level and able to compose written documentation that is professional, thorough, clear, and precise that requires little to no correction. Proficient using MS Office with a focus on Word and Excel, Adobe Acrobat, email, etc. Mental and physical ability to work the required hours, in ambient weather conditions, and mobilize around construction site. Proactive and self-motivated. Performs in a professional, responsible manner. Works independently and as a team member and follows industry standards.Demonstrates proficiency in construction projects at managing time efficiently, working independently, and adhering to schedule. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must maintain a constant state of mental alertness at all times. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time. Additionally, the ability to climb up and down ladders, walk on uneven, shifting surfaces, dirt, mud and gravel & up and down hills as well as occasional work in confined spaces. WORK ENVIRONMENT Work Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job. Job is performed both on active construction sites with exposure to all types of weather heat, cold, rain, snow, exposure to dust, dirt and noise, as well as in an office setting with exposure to computer screens and requires extensive use of a computer, keyboard, mouse and multi-line telephone system. Occasional travel may be required. Occasional "off-shift" evening/weekend/holiday work may be required. SUPERVISORY RESPONSIBILITIES Depending upon workload supervision of additional quality control employees and or subcontracted QC employees may be required. ADDITIONAL QUALIFYING FACTORS As a condition of employment, may be required to pass a pre-employment drug screening, as well as periodic random drug screenings, have acceptable reference and background check results to obtain access to secure areas of a military base. Must have reliable transportation to/from work. Shareholder Preference.BSNC gives hiring, promotion, training and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer.All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

SUMMARY Bering Straits Global Innovations, a company within the BSNC family, is currently seeking a qualified Quality Control Manager to oversee projects at Manchester Fuel Depot, Port Orchard, Washington, as well as subsequent projects in throughout the US.The Quality Control Manager is primarily responsible for overseeing and coordinating the planning, implementation, and supervision of the project Quality Control Plan. Wage/ Salary Range: $115,000 to $135,000 ESSENTIAL DUTIES & RESPONSIBILITIES The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. • Ensure that all materials, workmanship, and repairs are in full compliance of the contract, plans, and specifications and all building codes. • Review and approve all submittals and perform daily inspections of the work. • Prepare reports, both daily and monthly. • Monitor daily progress of projects. • Review company quality control and safety plan. • Possess a thorough and working knowledge of the plans and specifications of work performed. • Serve a liaison between contractor and government QAR representative. • Create and manage project submittal registers. • Assist with creating project specific Quality Control Plans. • Collection & Submission of all necessary submittals. • Coordination & Management of 3rd party testing. • Coordinate & lead Preparatory Phase meetings. • Conduct Initial Phase & Follow Up Phase Meetings as required. • Assure safety requirement are strictly adhered to. • Review and interpret plans, blue prints, site layouts, specifications, and construction methods to ensure compliance. Perform risk management and quality control to minimize project risks. Create and maintain comprehensive project documentation. Attend, facilitate, coordinate all required meetings and progress updates. Provide onsite project oversight and leadership of quality control. Interacts with management to document and monitor changes in construction procedures. QUALIFICATIONS - EXPERIENCE, EDUCATION AND CERTIFICATION Required (Minimum) Qualifications • Minimum 5 years of experience working in the construction industry, with a minimum of 3 years working on federal government construction projects. • Experience with OSHA, EM 385-1-1 and other regulatory requirements and industry standard. • Experience directing, training, and motivating field personnel. • Must be able to obtain GSA and military base passes and be able to operate motor vehicles on military installation. • Understanding of federal construction requirements and ability to adhere and manage. • Experience managing federal government construction projects is a requirement. • OSHA 30 certified • Construction Quality Control For Contractors certified Knowledge, Skills, Abilities, and Other Characteristics • Excellent communications skills, oral and written. •Excellent interpersonal skills. •Ability to take direction and follow instructions adequately. •Flexibility in required duties. •Self-motivated. •Must be able to handle stress and work in high pressure environments or under difficult conditions. •Analytical and problem-solving skills. •Familiarity with other PC software packages typically associated with construction. •Ability to meet deadlines and multi-task in fast paced environment. •Proficient or have the ability to learn Microsoft Office Suite (Word, Excel, and Outlook). •Ability to read and/or learn to interpret drawings and specifications. •Ability to communicate effectively with all levels of the organization, as well as with customers and vendors. •Detail oriented with the ability to efficiently analyze and organize significant amounts of information regarding plan layouts, materials, and scheduling • Ability to assess site exposures/construction risks and mitigate accordingly. • Ability to identify constructability issues. Preferred • Experience managing construction projects on government bases. • Experience managing quality control across multiple concurrent task orders or projects. • Previous facility management, superintendent, and Civil Engineering department experience • Previous experience managing large teams/subcontractors across multiple locations. NECESSARY PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employee must maintain a constant state of mental alertness at all times. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Ability to spend long hours at a work station operating a computer or in the field supervising crews. • Dexterity and good motor skills. • Travel to jobsites required. • Performance of the required duties will require physical ability to climb permanent and temporary stairs. • Passenger use of construction personnel hoists, ability to climb ladders and navigate work areas under construction. • Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. • Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear, stand, climb, balance, stoop, kneel, crouch, or crawl. • Employee must occasionally lift and/or move up to 50 pounds while performing the duties of this job. DOT COVERED/SAFETY-SENSITIVE ROLE REQUIREMENTS • This position is not subject to federal requirements regarding Department of Transportation "safety-sensitive" functions. WORK ENVIRONMENT Work Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job. This position requires the ability to maneuver around and construction sites, see, hear, and verbally communicate with co-workers and clients.Essential and marginal functions may require maintaining physical condition necessary for sitting, walking or standing, lifting, pushing, pulling, twisting, throwing, reaching, squatting, stretching, bending for prolonged periods of time; at times lift and carry as much at 50 pounds; near visual acuity to review written documentation; ability to hear and understand speech at normal room levels. SUPERVISORY RESPONSIBILITIES • No supervisory responsibilities. ADDITIONAL QUALIFYING FACTORS As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results. If applicable to the contract, you must also obtain the appropriate clearance levels required and be able to obtain access to military installations. Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer.All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.