Anderson Dahlen
Anoka, Minnesota
Anderson Dahlen Description: Gray's Specialty Equipment segment offers a comprehensive range of expert services to design, manufacture, integrate, install, and maintain some of the most advanced systems on the market. The Specialty Equipment segment includes Anderson Dahlen, located in Ramsey, MN, and Waconia, MN. Anderson Dahlen delivers end-to-end equipment design-build and contract manufacturing, with precision fabrication - cutting, forming, machining, welding, finishing, and complex assemblies - backed by engineering, integration, and complete process solutions including skids and sanitary platforms tailored to customer applications. Anderson Dahlen is ISO 9001:2015 certified, as well as ASME, AWS, and PED compliant. The wage range for this role takes into account a wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; as well as other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. It is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $77,350 to $113,500 annually. PRIMARY OBJECTIVE OF THE POSITION: Prepare accurate estimates for fabricated metal components and assemblies by gathering information, analyzing important metrics, and conducting regular risk assessments. Fluent in manufacturing, with in-depth knowledge of bills and routings for metal products and estimating ERP systems. Excellent communicator, detail-oriented with outstanding organizational skills. MAJOR AREAS OF ACCOUNTABILITY: Have a fluid understanding of the ERP quoting system or other quoting systems in use. Understand the part/project and its requirements. Determine key variables for cost and other estimates. Conduct research to obtain data on labor costs, materials, production times etc. Gather and review offers and quotes by subcontractors or vendors. Perform risk analysis. Create and submit estimate reports or bids to appropriate persons (project managers, clients, sales team, etc.) Build relationships with key vendors (subcontractors, suppliers, engineers etc.) Assist with training of personnel. Basic mathematics skills and knowledge. Understanding of how to read and interpret blueprints and schematics. Proficient in relevant software including MS Office Suite. Excellent presentation and communication skills. Strong problem-solving abilities. Knowledge of and ability to understand AWS and ASME Welding Codes. Proficient in estimating sheet metal components and weldments. Other duties as assigned. Requirements: QUALIFICATIONS FOR ENTRY: Bachelor's or associate degree in industrial or mechanical engineering is preferred or relevant field. A minimum of 12 years as an Estimator or similar role. ERP Systems experience. Advanced training with Geometric Dimensioning and Tolerancing. Advanced training, knowledge and ability to understand Welding Symbols. Physical Requirements: The company fosters a manufacturing-type environment. The physical demands described below are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Lift/Carry- 0-10 lbs.- Occasionally 11-50 lbs.- Never 51-100 lbs.- Never Push/Pull- 0-25 lbs.- Occasionally 26-75 lbs.- Never 76-100 lbs.- Never Bend- 0-33% during an 8-hour shift Twist/Turn- 0-33% during an 8-hour shift Kneel/Squat- Not at all Sit- 67-100% during an 8-hour shift. Stand/Walk- 0-33% during an 8-hour shift Overhead Reaching- 0-33% during an 8-hour shift Ladder/Stair- 0-33% during an 8-hour shift EEO DISCLAIMER: Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Compensation details: 00 Yearly Salary PI702c08ca6a26-6300
Anderson Dahlen Description: Gray's Specialty Equipment segment offers a comprehensive range of expert services to design, manufacture, integrate, install, and maintain some of the most advanced systems on the market. The Specialty Equipment segment includes Anderson Dahlen, located in Ramsey, MN, and Waconia, MN. Anderson Dahlen delivers end-to-end equipment design-build and contract manufacturing, with precision fabrication - cutting, forming, machining, welding, finishing, and complex assemblies - backed by engineering, integration, and complete process solutions including skids and sanitary platforms tailored to customer applications. Anderson Dahlen is ISO 9001:2015 certified, as well as ASME, AWS, and PED compliant. The wage range for this role takes into account a wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; as well as other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. It is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $77,350 to $113,500 annually. PRIMARY OBJECTIVE OF THE POSITION: Prepare accurate estimates for fabricated metal components and assemblies by gathering information, analyzing important metrics, and conducting regular risk assessments. Fluent in manufacturing, with in-depth knowledge of bills and routings for metal products and estimating ERP systems. Excellent communicator, detail-oriented with outstanding organizational skills. MAJOR AREAS OF ACCOUNTABILITY: Have a fluid understanding of the ERP quoting system or other quoting systems in use. Understand the part/project and its requirements. Determine key variables for cost and other estimates. Conduct research to obtain data on labor costs, materials, production times etc. Gather and review offers and quotes by subcontractors or vendors. Perform risk analysis. Create and submit estimate reports or bids to appropriate persons (project managers, clients, sales team, etc.) Build relationships with key vendors (subcontractors, suppliers, engineers etc.) Assist with training of personnel. Basic mathematics skills and knowledge. Understanding of how to read and interpret blueprints and schematics. Proficient in relevant software including MS Office Suite. Excellent presentation and communication skills. Strong problem-solving abilities. Knowledge of and ability to understand AWS and ASME Welding Codes. Proficient in estimating sheet metal components and weldments. Other duties as assigned. Requirements: QUALIFICATIONS FOR ENTRY: Bachelor's or associate degree in industrial or mechanical engineering is preferred or relevant field. A minimum of 12 years as an Estimator or similar role. ERP Systems experience. Advanced training with Geometric Dimensioning and Tolerancing. Advanced training, knowledge and ability to understand Welding Symbols. Physical Requirements: The company fosters a manufacturing-type environment. The physical demands described below are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Lift/Carry- 0-10 lbs.- Occasionally 11-50 lbs.- Never 51-100 lbs.- Never Push/Pull- 0-25 lbs.- Occasionally 26-75 lbs.- Never 76-100 lbs.- Never Bend- 0-33% during an 8-hour shift Twist/Turn- 0-33% during an 8-hour shift Kneel/Squat- Not at all Sit- 67-100% during an 8-hour shift. Stand/Walk- 0-33% during an 8-hour shift Overhead Reaching- 0-33% during an 8-hour shift Ladder/Stair- 0-33% during an 8-hour shift EEO DISCLAIMER: Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Compensation details: 00 Yearly Salary PI702c08ca6a26-6300
Anderson Dahlen
Anoka, Minnesota
Anderson Dahlen Description: Gray's Specialty Equipment segment offers a comprehensive range of expert services, including design, manufacturing, integration, installation, and maintenance of some of the most advanced systems in the food, industrial, pharmaceutical, and vacuum science markets. From components to fully integrated equipment, we provide purpose-built solutions that integrate seamlessly into larger facility design-build, expansion, and retrofit projects. The Specialty Equipment segment includes Anderson Dahlen, located in Ramsey, MN and Waconia, MN. Anderson Dahlen specializes in stainless steel and specialty alloy fabrication and is ISO 9001:2015 certified, as well as ASME, AWS, and PED compliant. The wage range for this role takes into account a wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; as well as other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. It is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $77,350 to $113,500/annually . PRIMARY OBJECTIVE OF THE POSITION: The Manufacturing Engineer's primary responsibility is to be the interface between Engineering and Production by developing manufacturing plans within the ERP system. In doing so, ensure that BOM's and routings for parts and assemblies are complete, accurate and conducive to Design for Manufacturability (DFM). Advise the Engineering community regarding in-house manufacturing capabilities. Manufacturing Engineers operate in a team environment and are responsible for providing travelers to Production that are consistent based on standard processes. MAJOR AREAS OF ACCOUNTABILITY: Develops the production plan by entering BOM and routing into ERP System. Works with Project Managers, CAD Designers and Engineers; and as such is consistently able to communicate clearly and effectively with personnel in an appropriate and understandable manner. Intimately involved in all welding, machining, finishing, and assembly activity for the design build group. Addresses potential issues to avoid problems and minimize rework and provides related information to Project Manager necessary for effective risk mitigation. Conducts cross functional manufacturing reviews with Production team in collaboration with Project Manager. Demonstrates safety culture aligned with company expectations. Occasional travel to customer site for installation or issue resolution. Performs related work as apparent or assigned. Complies with Company and Department policies and procedures as applicable. Other duties as assigned. Requirements: QUALIFICATIONS FOR ENTRY: BS degree in Engineering in Mechanical, Manufacturing, Industrial, Machine Design or related field with 3+ years of experience in a manufacturing or fabrication environment. AAS degree in a Technical/Engineering field with 5+ years of experience in a manufacturing or fabrication environment Knowledge of ERP systems required (preferably Made to Manage). Ability to interpret engineering drawings required. Familiarity with 3D CAD software a plus (preferably Solid Works). Strong working knowledge of Microsoft Office. Experience with welding, fabrication, forming, bending, laser a plus. Detail-oriented with strong planning and monitoring skills. Solid teamwork and organizational skills including attention to detail, problem solving and multi-tasking. Ability to work independently, proven efficient time management and organizational skills. Displays a positive attitude and a strong desire to learn and grow. PHYSICAL REQUIREMENTS: The company fosters a manufacturing-type environment. The physical demands described below are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Lift/Carry- 0-10 lbs.- Occasionally 11-50 lbs.- Never 51-100 lbs.- Never Push/Pull- 0-25 lbs.- Occasionally 26-75 lbs.- Never 76-100 lbs.- Never Bend- 0-33% during an 8-hour shift Twist/Turn- 0-33% during an 8-hour shift Kneel/Squat- Not at all Sit- 67-100% during an 8-hour shift. Stand/Walk- 0-33% during an 8-hour shift Overhead Reaching- 0-33% during an 8-hour shift Ladder/Stair- 0-33% during an 8-hour shift EEO DISCLAIMER: Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Compensation details: 00 Yearly Salary PI937f37f257bb-9013
Anderson Dahlen Description: Gray's Specialty Equipment segment offers a comprehensive range of expert services, including design, manufacturing, integration, installation, and maintenance of some of the most advanced systems in the food, industrial, pharmaceutical, and vacuum science markets. From components to fully integrated equipment, we provide purpose-built solutions that integrate seamlessly into larger facility design-build, expansion, and retrofit projects. The Specialty Equipment segment includes Anderson Dahlen, located in Ramsey, MN and Waconia, MN. Anderson Dahlen specializes in stainless steel and specialty alloy fabrication and is ISO 9001:2015 certified, as well as ASME, AWS, and PED compliant. The wage range for this role takes into account a wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; as well as other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. It is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $77,350 to $113,500/annually . PRIMARY OBJECTIVE OF THE POSITION: The Manufacturing Engineer's primary responsibility is to be the interface between Engineering and Production by developing manufacturing plans within the ERP system. In doing so, ensure that BOM's and routings for parts and assemblies are complete, accurate and conducive to Design for Manufacturability (DFM). Advise the Engineering community regarding in-house manufacturing capabilities. Manufacturing Engineers operate in a team environment and are responsible for providing travelers to Production that are consistent based on standard processes. MAJOR AREAS OF ACCOUNTABILITY: Develops the production plan by entering BOM and routing into ERP System. Works with Project Managers, CAD Designers and Engineers; and as such is consistently able to communicate clearly and effectively with personnel in an appropriate and understandable manner. Intimately involved in all welding, machining, finishing, and assembly activity for the design build group. Addresses potential issues to avoid problems and minimize rework and provides related information to Project Manager necessary for effective risk mitigation. Conducts cross functional manufacturing reviews with Production team in collaboration with Project Manager. Demonstrates safety culture aligned with company expectations. Occasional travel to customer site for installation or issue resolution. Performs related work as apparent or assigned. Complies with Company and Department policies and procedures as applicable. Other duties as assigned. Requirements: QUALIFICATIONS FOR ENTRY: BS degree in Engineering in Mechanical, Manufacturing, Industrial, Machine Design or related field with 3+ years of experience in a manufacturing or fabrication environment. AAS degree in a Technical/Engineering field with 5+ years of experience in a manufacturing or fabrication environment Knowledge of ERP systems required (preferably Made to Manage). Ability to interpret engineering drawings required. Familiarity with 3D CAD software a plus (preferably Solid Works). Strong working knowledge of Microsoft Office. Experience with welding, fabrication, forming, bending, laser a plus. Detail-oriented with strong planning and monitoring skills. Solid teamwork and organizational skills including attention to detail, problem solving and multi-tasking. Ability to work independently, proven efficient time management and organizational skills. Displays a positive attitude and a strong desire to learn and grow. PHYSICAL REQUIREMENTS: The company fosters a manufacturing-type environment. The physical demands described below are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Lift/Carry- 0-10 lbs.- Occasionally 11-50 lbs.- Never 51-100 lbs.- Never Push/Pull- 0-25 lbs.- Occasionally 26-75 lbs.- Never 76-100 lbs.- Never Bend- 0-33% during an 8-hour shift Twist/Turn- 0-33% during an 8-hour shift Kneel/Squat- Not at all Sit- 67-100% during an 8-hour shift. Stand/Walk- 0-33% during an 8-hour shift Overhead Reaching- 0-33% during an 8-hour shift Ladder/Stair- 0-33% during an 8-hour shift EEO DISCLAIMER: Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Compensation details: 00 Yearly Salary PI937f37f257bb-9013