Mechanical HVAC & Plumbing Engineer Pay: $73.69 Contract o Hire US Citizenship or Green Card Status Must be within 50 miles of a BV office EXCLUDING Virginia REQUIRED SKILLS: PE license required Minimum of 8 years related work experience. A HVAC and plumbing engineer interested in working on a diverse collection of building configurations. Under general supervision, capable of performing all aspects of conventional design engineering, analysis, and studies on new and existing structures. Key Responsibilities: The Mechanical Buildings Design Group provides HVAC and plumbing solutions for COMPANY'S Global projects. The Mechanical Engineer level 5 position is responsible for the engineering and design of the HVAC and plumbing systems in various types of facilities. The HVAC Team is engaged in the following: Design and Construction Activities o Project Delivery Methods - Traditional Design-Bid-Build and Alternative Conceptual-Bid- Build. o Facility Types Water Treatment, Power Generation buildings, and Substations. o Systems HVAC and Plumbing. o Type of Areas Waste water treatment buildings, Administrative, Warehouse, Maintenance, Workshop, Laboratory, Chemical Storage & Handling, Electrical Distribution Center, Low & Medium Voltage Switchgear, and Pump Areas. Studies o Energy Audit/Efficiency - Engineering studies, system performance reviews, and energy compliance calculations o Code Review/Application - Facility review for code compliance. o Sustainable Design/LEED - Application of sustainable strategies Self-Motivated, Problem Solving, Written Communications, Driven for Results, Quality Focused, Strong Listening Skills. Intermediate knowledge of engineering design principles and the following applicable design guides and standards related to HVAC, and plumbing system design. Including a basic knowledge of the following : International Codes Council (ICC) Suite of Codes ASHRAE Handbooks / Standards ASPE design handbooks SMACNA Standards NFPA standards Computer generated HVAC Heatloads, energy modeling and HVAC equipment sizing Technical Submittal reviewing process Bid reviewing process Microsoft Office Suite Bluebeam Revu Revit 3D Modeling. Experience with large-scale water-cooled chillers is preferred. Education: Requires a bachelor's degree in engineering from either a recognized accredited program in their home country or the country in which the professional is practicing. All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, an
12/16/2025
Mechanical HVAC & Plumbing Engineer Pay: $73.69 Contract o Hire US Citizenship or Green Card Status Must be within 50 miles of a BV office EXCLUDING Virginia REQUIRED SKILLS: PE license required Minimum of 8 years related work experience. A HVAC and plumbing engineer interested in working on a diverse collection of building configurations. Under general supervision, capable of performing all aspects of conventional design engineering, analysis, and studies on new and existing structures. Key Responsibilities: The Mechanical Buildings Design Group provides HVAC and plumbing solutions for COMPANY'S Global projects. The Mechanical Engineer level 5 position is responsible for the engineering and design of the HVAC and plumbing systems in various types of facilities. The HVAC Team is engaged in the following: Design and Construction Activities o Project Delivery Methods - Traditional Design-Bid-Build and Alternative Conceptual-Bid- Build. o Facility Types Water Treatment, Power Generation buildings, and Substations. o Systems HVAC and Plumbing. o Type of Areas Waste water treatment buildings, Administrative, Warehouse, Maintenance, Workshop, Laboratory, Chemical Storage & Handling, Electrical Distribution Center, Low & Medium Voltage Switchgear, and Pump Areas. Studies o Energy Audit/Efficiency - Engineering studies, system performance reviews, and energy compliance calculations o Code Review/Application - Facility review for code compliance. o Sustainable Design/LEED - Application of sustainable strategies Self-Motivated, Problem Solving, Written Communications, Driven for Results, Quality Focused, Strong Listening Skills. Intermediate knowledge of engineering design principles and the following applicable design guides and standards related to HVAC, and plumbing system design. Including a basic knowledge of the following : International Codes Council (ICC) Suite of Codes ASHRAE Handbooks / Standards ASPE design handbooks SMACNA Standards NFPA standards Computer generated HVAC Heatloads, energy modeling and HVAC equipment sizing Technical Submittal reviewing process Bid reviewing process Microsoft Office Suite Bluebeam Revu Revit 3D Modeling. Experience with large-scale water-cooled chillers is preferred. Education: Requires a bachelor's degree in engineering from either a recognized accredited program in their home country or the country in which the professional is practicing. All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, an
Pay: $125000 per year - $140000 per year At Great Wolf, the Director of Engineering sets the vision and managing the effective functioning of the entire hotel/resort and/or property, including physical buildings, grounds, mechanical, electrical, and HVAC systems. This is a senior management level position, which manages budget, capital expenditure projects, preventative maintenance and energy conservation. Essential Duties & Responsibilities Develops engineering organizational strategies by contributing engineering information, analysis, and establishing engineering objectives Establishes engineering operational strategies by evaluating engineering trends; establishing critical measurements and designing engineering systems Determine and monitor production, productivity, quality, and customer-service strategies Develops engineering financial strategies by estimating, forecasting, and anticipating requirements, trends, and variances; aligning monetary resources; developing action plans; measuring and analyzing results; initiating corrective actions; minimizing the impact of variances Establishes best practice standards including developing policies, procedures, and workflows Conduct engineering project management by evaluating feasibility; identifying requirements and resource utilization, studying available technology, conferring with engineering consultants, completing cost-benefit studies, and estimating costs relative to budget Maintains uninterrupted operations by coordinating provision and backup of supplied utilities Provides technical information by analyzing operational problems, collecting, analyzing, and summarizing technical data and trends Updates job knowledge by tracking updates in regulations and codes; participating in educational opportunities, maintaining personal networks and active participation in professional organizations Conduct supervisory responsibilities by communicating and enforcing values, policies and procedures; selection, orientation, training, coaching and disciplinary counseling, and monitoring job performance Basic Qualifications & Skills Associates degree or equivalent experience Plumbing License, Certified Pool & Spa (CPO) License, Aquatic Facility Operator (AFO) Certified 2+ years of work experience with managing multiple teams of technical employees through projects 1+ years of senior management experience Experience with engineering design Desired Qualifications & Traits Previous experience in leadership role in resort/waterpark setting Bachelors degree or equivalent experience Able to develop, implement, and monitor programs that adhere to all appropriate regulations, including: Ergonomics, Emergency Response, Injury and Illness Prevention, and Hazard Communications Physical Requirements Able to lift up to 15 lbs Able to bend, stretch, and twist Able to sit or stand for long periods of time Able to climb multiple flights of stairs on daily basis and walk frequently Estimated Salary Range: $125000 per year - $140000 per year annual base salary An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, travel requirements, revenue-based metrics, any contractual agreements, and business or organizational needs. The range listed is just one component of Great Wolf's total compensation package. Other rewards may include annual bonuses, a Paid Time Off policy, and other perks. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, and for inquiring about, discussing or disclosing compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
12/16/2025
Full time
Pay: $125000 per year - $140000 per year At Great Wolf, the Director of Engineering sets the vision and managing the effective functioning of the entire hotel/resort and/or property, including physical buildings, grounds, mechanical, electrical, and HVAC systems. This is a senior management level position, which manages budget, capital expenditure projects, preventative maintenance and energy conservation. Essential Duties & Responsibilities Develops engineering organizational strategies by contributing engineering information, analysis, and establishing engineering objectives Establishes engineering operational strategies by evaluating engineering trends; establishing critical measurements and designing engineering systems Determine and monitor production, productivity, quality, and customer-service strategies Develops engineering financial strategies by estimating, forecasting, and anticipating requirements, trends, and variances; aligning monetary resources; developing action plans; measuring and analyzing results; initiating corrective actions; minimizing the impact of variances Establishes best practice standards including developing policies, procedures, and workflows Conduct engineering project management by evaluating feasibility; identifying requirements and resource utilization, studying available technology, conferring with engineering consultants, completing cost-benefit studies, and estimating costs relative to budget Maintains uninterrupted operations by coordinating provision and backup of supplied utilities Provides technical information by analyzing operational problems, collecting, analyzing, and summarizing technical data and trends Updates job knowledge by tracking updates in regulations and codes; participating in educational opportunities, maintaining personal networks and active participation in professional organizations Conduct supervisory responsibilities by communicating and enforcing values, policies and procedures; selection, orientation, training, coaching and disciplinary counseling, and monitoring job performance Basic Qualifications & Skills Associates degree or equivalent experience Plumbing License, Certified Pool & Spa (CPO) License, Aquatic Facility Operator (AFO) Certified 2+ years of work experience with managing multiple teams of technical employees through projects 1+ years of senior management experience Experience with engineering design Desired Qualifications & Traits Previous experience in leadership role in resort/waterpark setting Bachelors degree or equivalent experience Able to develop, implement, and monitor programs that adhere to all appropriate regulations, including: Ergonomics, Emergency Response, Injury and Illness Prevention, and Hazard Communications Physical Requirements Able to lift up to 15 lbs Able to bend, stretch, and twist Able to sit or stand for long periods of time Able to climb multiple flights of stairs on daily basis and walk frequently Estimated Salary Range: $125000 per year - $140000 per year annual base salary An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, travel requirements, revenue-based metrics, any contractual agreements, and business or organizational needs. The range listed is just one component of Great Wolf's total compensation package. Other rewards may include annual bonuses, a Paid Time Off policy, and other perks. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, and for inquiring about, discussing or disclosing compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
Pay: $125000 per year - $140000 per year At Great Wolf, the Director of Engineering sets the vision and managing the effective functioning of the entire hotel/resort and/or property, including physical buildings, grounds, mechanical, electrical, and HVAC systems. This is a senior management level position, which manages budget, capital expenditure projects, preventative maintenance and energy conservation. Essential Duties & Responsibilities Develops engineering organizational strategies by contributing engineering information, analysis, and establishing engineering objectives Establishes engineering operational strategies by evaluating engineering trends; establishing critical measurements and designing engineering systems Determine and monitor production, productivity, quality, and customer-service strategies Develops engineering financial strategies by estimating, forecasting, and anticipating requirements, trends, and variances; aligning monetary resources; developing action plans; measuring and analyzing results; initiating corrective actions; minimizing the impact of variances Establishes best practice standards including developing policies, procedures, and workflows Conduct engineering project management by evaluating feasibility; identifying requirements and resource utilization, studying available technology, conferring with engineering consultants, completing cost-benefit studies, and estimating costs relative to budget Maintains uninterrupted operations by coordinating provision and backup of supplied utilities Provides technical information by analyzing operational problems, collecting, analyzing, and summarizing technical data and trends Updates job knowledge by tracking updates in regulations and codes; participating in educational opportunities, maintaining personal networks and active participation in professional organizations Conduct supervisory responsibilities by communicating and enforcing values, policies and procedures; selection, orientation, training, coaching and disciplinary counseling, and monitoring job performance Basic Qualifications & Skills Associates degree or equivalent experience Plumbing License, Certified Pool & Spa (CPO) License, Aquatic Facility Operator (AFO) Certified 2+ years of work experience with managing multiple teams of technical employees through projects 1+ years of senior management experience Experience with engineering design Desired Qualifications & Traits Previous experience in leadership role in resort/waterpark setting Bachelors degree or equivalent experience Able to develop, implement, and monitor programs that adhere to all appropriate regulations, including: Ergonomics, Emergency Response, Injury and Illness Prevention, and Hazard Communications Physical Requirements Able to lift up to 15 lbs Able to bend, stretch, and twist Able to sit or stand for long periods of time Able to climb multiple flights of stairs on daily basis and walk frequently Estimated Salary Range: $125000 per year - $140000 per year annual base salary An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, travel requirements, revenue-based metrics, any contractual agreements, and business or organizational needs. The range listed is just one component of Great Wolf's total compensation package. Other rewards may include annual bonuses, a Paid Time Off policy, and other perks. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, and for inquiring about, discussing or disclosing compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
12/16/2025
Full time
Pay: $125000 per year - $140000 per year At Great Wolf, the Director of Engineering sets the vision and managing the effective functioning of the entire hotel/resort and/or property, including physical buildings, grounds, mechanical, electrical, and HVAC systems. This is a senior management level position, which manages budget, capital expenditure projects, preventative maintenance and energy conservation. Essential Duties & Responsibilities Develops engineering organizational strategies by contributing engineering information, analysis, and establishing engineering objectives Establishes engineering operational strategies by evaluating engineering trends; establishing critical measurements and designing engineering systems Determine and monitor production, productivity, quality, and customer-service strategies Develops engineering financial strategies by estimating, forecasting, and anticipating requirements, trends, and variances; aligning monetary resources; developing action plans; measuring and analyzing results; initiating corrective actions; minimizing the impact of variances Establishes best practice standards including developing policies, procedures, and workflows Conduct engineering project management by evaluating feasibility; identifying requirements and resource utilization, studying available technology, conferring with engineering consultants, completing cost-benefit studies, and estimating costs relative to budget Maintains uninterrupted operations by coordinating provision and backup of supplied utilities Provides technical information by analyzing operational problems, collecting, analyzing, and summarizing technical data and trends Updates job knowledge by tracking updates in regulations and codes; participating in educational opportunities, maintaining personal networks and active participation in professional organizations Conduct supervisory responsibilities by communicating and enforcing values, policies and procedures; selection, orientation, training, coaching and disciplinary counseling, and monitoring job performance Basic Qualifications & Skills Associates degree or equivalent experience Plumbing License, Certified Pool & Spa (CPO) License, Aquatic Facility Operator (AFO) Certified 2+ years of work experience with managing multiple teams of technical employees through projects 1+ years of senior management experience Experience with engineering design Desired Qualifications & Traits Previous experience in leadership role in resort/waterpark setting Bachelors degree or equivalent experience Able to develop, implement, and monitor programs that adhere to all appropriate regulations, including: Ergonomics, Emergency Response, Injury and Illness Prevention, and Hazard Communications Physical Requirements Able to lift up to 15 lbs Able to bend, stretch, and twist Able to sit or stand for long periods of time Able to climb multiple flights of stairs on daily basis and walk frequently Estimated Salary Range: $125000 per year - $140000 per year annual base salary An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, travel requirements, revenue-based metrics, any contractual agreements, and business or organizational needs. The range listed is just one component of Great Wolf's total compensation package. Other rewards may include annual bonuses, a Paid Time Off policy, and other perks. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, and for inquiring about, discussing or disclosing compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
Job Description Aramark is looking for a recent grad in the field of mechanical or electrical engineering to become part of a commissioning team. Commissioning is a process that verifies the operation of new building infrastructure including mechanical, electrical, and plumbing systems. We are engaged by the owner to oversee the design and construction of multimillion dollar projects. As part of the commissioning process, the employee will participate in peer reviews of the design, review submittals, conduct static inspections of the construction, test the new equipment and assist the owner with ensuring the proper training is provided. Documentation will be required for each of the processes. Job Responsibilities The desired candidate will possess a mechanical or electrical engineering degree or trade school degree (with 5 years of experience) in the fields of temperature controls, HVAC equipment or electrical equipment. This is an entry level position and you will be trained by experienced commissioning agents. The work will include both field and office work which will be home based. Work within the region will primarily be local to the hiring location and travel will be limited primarily to sites that can be accessed on a daily commute. As a commissioning agent you are responsible for telling others what is wrong utilizing the design documentation to compare to the actual installation. You are not responsible for determining the remediation however as you become experienced, you will be asked for suggestions as to a remedy. You will not be alone in this endeavor as Aramark has over 25 experienced commissioning agents. Qualifications Bachelor of Science in an Engineering or Technical Related Field -or- Trade School (in similar field) with 5 years experience Highly motivated individual Experience with MS Word and Excel Ability to read and understand construction documents and specifications Automatic temperature controls experience is preferred Education About Aramark Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on Facebook, Instagram and Twitter.
12/16/2025
Full time
Job Description Aramark is looking for a recent grad in the field of mechanical or electrical engineering to become part of a commissioning team. Commissioning is a process that verifies the operation of new building infrastructure including mechanical, electrical, and plumbing systems. We are engaged by the owner to oversee the design and construction of multimillion dollar projects. As part of the commissioning process, the employee will participate in peer reviews of the design, review submittals, conduct static inspections of the construction, test the new equipment and assist the owner with ensuring the proper training is provided. Documentation will be required for each of the processes. Job Responsibilities The desired candidate will possess a mechanical or electrical engineering degree or trade school degree (with 5 years of experience) in the fields of temperature controls, HVAC equipment or electrical equipment. This is an entry level position and you will be trained by experienced commissioning agents. The work will include both field and office work which will be home based. Work within the region will primarily be local to the hiring location and travel will be limited primarily to sites that can be accessed on a daily commute. As a commissioning agent you are responsible for telling others what is wrong utilizing the design documentation to compare to the actual installation. You are not responsible for determining the remediation however as you become experienced, you will be asked for suggestions as to a remedy. You will not be alone in this endeavor as Aramark has over 25 experienced commissioning agents. Qualifications Bachelor of Science in an Engineering or Technical Related Field -or- Trade School (in similar field) with 5 years experience Highly motivated individual Experience with MS Word and Excel Ability to read and understand construction documents and specifications Automatic temperature controls experience is preferred Education About Aramark Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on Facebook, Instagram and Twitter.
Facility Services Management Inc.
Fort Riley, Kansas
Stationary Engineer Stationary Engineer / Boiler Operator Join Our Facilities Team We are seeking a highly skilled and experienced Stationary Engineer / Boiler Operator to support the safe, reliable, and efficient operation of our steam plant and critical utility systems. This role is essential to maintaining uninterrupted services across our healthcare and industrial facilities. Key Responsibilities Operate and maintain steam plant equipment, including gas-fired boilers, electric boilers, air compressors, generators, pumps, and motors. Monitor, record, and interpret system performance using meters, gauges, automated controls, and digital monitoring platforms. Perform routine maintenance, troubleshooting, and repairs on mechanical, electrical, plumbing, and refrigeration systems. Conduct boiler water treatment testing and apply appropriate chemical additives to sustain efficiency and protect system integrity. Respond promptly to emergency service calls and document all activities in operator logs. Collaborate with cross-functional facilities teams to ensure reliability, meet project timelines, and support continuous operations. Follow and enforce OSHA and company safety protocols-including lockout/tagout (LOTO) and other critical safety procedures. Required Skills Strong troubleshooting skills across HVAC, electrical, plumbing, and refrigeration systems. Ability to read and interpret schematics, blueprints, and technical manuals. Demonstrated safe operation of hand tools, power tools, and diagnostic equipment. Working knowledge of medium- and high-voltage electrical systems and critical building infrastructure. Competent in Microsoft Office for communication, documentation, and training access. Qualifications High School Diploma or GED required. Minimum 3 years of experience in a healthcare environment or highly regulated industrial setting. Knowledge of industrial HVAC systems, boilers (up to 5 MMBTU/hr), chillers, hydronic systems, and plant operations. One or more of the following is required: A.S. in Mechanical Electrical Technology (MET) MECH Certification Accredited Operating Engineer Apprenticeship Military Journeyman-Level Certification Valid Engineer's License / High-Pressure Boiler Operator Qualification Universal EPA 608 Refrigeration Certification Valid driver's license with an insurable driving record. Preferred Certifications Building Automation Systems (BAS) Training/Certification Building Operator Certification (BOC) NFPA 70 and 70E Familiarity with NFPA, NEC, TJC, OSHA, and related regulatory codes. Physical Requirements Ability to lift 10 lbs routinely and up to 50 lbs as needed. Frequent reaching, handling, and communication activities. Occasional standing, walking, climbing, kneeling, and crawling. Reasonable accommodations available for qualified individuals with disabilities. Ready to Power Up Your Career? Apply today and become a vital member of our operations team-helping to maintain the systems that keep our facilities running safely and efficiently. Equal Opportunity Employer This job description may be modified at any time based on organizational needs. Note: This position is Enhanced Referral Eligible for internal employee referrals. Compensation details: 32-32 PIb9638badcc13-4754
12/15/2025
Full time
Stationary Engineer Stationary Engineer / Boiler Operator Join Our Facilities Team We are seeking a highly skilled and experienced Stationary Engineer / Boiler Operator to support the safe, reliable, and efficient operation of our steam plant and critical utility systems. This role is essential to maintaining uninterrupted services across our healthcare and industrial facilities. Key Responsibilities Operate and maintain steam plant equipment, including gas-fired boilers, electric boilers, air compressors, generators, pumps, and motors. Monitor, record, and interpret system performance using meters, gauges, automated controls, and digital monitoring platforms. Perform routine maintenance, troubleshooting, and repairs on mechanical, electrical, plumbing, and refrigeration systems. Conduct boiler water treatment testing and apply appropriate chemical additives to sustain efficiency and protect system integrity. Respond promptly to emergency service calls and document all activities in operator logs. Collaborate with cross-functional facilities teams to ensure reliability, meet project timelines, and support continuous operations. Follow and enforce OSHA and company safety protocols-including lockout/tagout (LOTO) and other critical safety procedures. Required Skills Strong troubleshooting skills across HVAC, electrical, plumbing, and refrigeration systems. Ability to read and interpret schematics, blueprints, and technical manuals. Demonstrated safe operation of hand tools, power tools, and diagnostic equipment. Working knowledge of medium- and high-voltage electrical systems and critical building infrastructure. Competent in Microsoft Office for communication, documentation, and training access. Qualifications High School Diploma or GED required. Minimum 3 years of experience in a healthcare environment or highly regulated industrial setting. Knowledge of industrial HVAC systems, boilers (up to 5 MMBTU/hr), chillers, hydronic systems, and plant operations. One or more of the following is required: A.S. in Mechanical Electrical Technology (MET) MECH Certification Accredited Operating Engineer Apprenticeship Military Journeyman-Level Certification Valid Engineer's License / High-Pressure Boiler Operator Qualification Universal EPA 608 Refrigeration Certification Valid driver's license with an insurable driving record. Preferred Certifications Building Automation Systems (BAS) Training/Certification Building Operator Certification (BOC) NFPA 70 and 70E Familiarity with NFPA, NEC, TJC, OSHA, and related regulatory codes. Physical Requirements Ability to lift 10 lbs routinely and up to 50 lbs as needed. Frequent reaching, handling, and communication activities. Occasional standing, walking, climbing, kneeling, and crawling. Reasonable accommodations available for qualified individuals with disabilities. Ready to Power Up Your Career? Apply today and become a vital member of our operations team-helping to maintain the systems that keep our facilities running safely and efficiently. Equal Opportunity Employer This job description may be modified at any time based on organizational needs. Note: This position is Enhanced Referral Eligible for internal employee referrals. Compensation details: 32-32 PIb9638badcc13-4754
Project Manager Commercial Mechanical Contracting Location: Fort Worth, TX (On-site) Employment Type: Full-Time Compensation: $90,000 $115,000 annually (Based on experience) About the Company Join one of Texass most respected mechanical contractors, proudly serving the commercial and industrial construction industry for over 40 years. The company specializes in HVAC, plumbing, piping, and sheet metal systems for large-scale projects such as hospitals, data centers, and high-rise buildings. Built on a foundation of safety, integrity, and technical excellence, this firm offers a collaborative environment where innovation and career growth are encouraged. Every project is driven by a commitment to quality and long-term client relationships. Position Summary The Project Manager is the central point of leadership for all aspects of commercial mechanical construction projects from planning through completion. Youll oversee HVAC, plumbing, and piping scopes, managing budgets, schedules, and teams to ensure projects are completed safely, profitably, and on time. This is a high-impact role ideal for a results-driven professional with strong technical expertise, financial acumen, and leadership skills who thrives in a fast-paced, team-oriented environment. Key Responsibilities Lead mechanical projects from preconstruction to closeout, ensuring adherence to design, budget, and timeline. Develop and maintain project schedules, look-aheads, and cost forecasts to track progress and control expenses. Manage buyout, job cost breakdowns, billings, and cost-to-complete reports. Oversee all RFIs, submittals, change orders, and project documentation, maintaining open communication with clients, vendors, and subcontractors. Coordinate the procurement of mechanical materials and equipment in alignment with project specifications and lead times. Work closely with field Superintendents and Foremen to align manpower plans with construction milestones. Lead preconstruction meetings, progress updates, and closeout sessions for multiple projects simultaneously. Maintain comprehensive electronic documentation and records throughout the project lifecycle. Build lasting client relationships, providing proactive communication and resolution of project issues. Support and enforce all company and OSHA safety protocols on job sites. Qualifications 5+ years of project management experience in commercial mechanical or plumbing construction. Proven success managing large projects such as hospitals, data centers, or high-rise facilities. Strong knowledge of construction financials, cost forecasting, and project closeout procedures. Proficiency in construction management software (Procore, Bluebeam, or similar). Excellent communication, leadership, and organizational skills with the ability to lead cross-functional teams. Bachelors degree in Construction Management, Engineering, or related field preferred; equivalent experience accepted. Valid drivers license and ability to travel locally to project sites as needed. Must meet standard employment screenings. Compensation and Benefits Competitive salary: $90,000 $115,000 annually, based on experience. Company vehicle or mileage reimbursement. 401(k) plan with employer match. Comprehensive health, dental, vision, and life insurance. Paid time off and paid holidays. Tuition reimbursement and professional development programs. Relocation assistance available. Referral bonuses and structured career advancement opportunities into Senior Project Manager or Operations roles. Why Join This Team This is more than a job its a chance to shape large-scale mechanical projects that define Texas skylines. Youll work alongside seasoned professionals in a company that values safety, quality, and long-term relationships. If youre ready to take your career to the next level with a company that invests in your growth, apply today. Equal Opportunity Statement: Applicants with a criminal record are encouraged to apply. All qualified candidates will receive consideration based on experience and ability.
12/14/2025
Project Manager Commercial Mechanical Contracting Location: Fort Worth, TX (On-site) Employment Type: Full-Time Compensation: $90,000 $115,000 annually (Based on experience) About the Company Join one of Texass most respected mechanical contractors, proudly serving the commercial and industrial construction industry for over 40 years. The company specializes in HVAC, plumbing, piping, and sheet metal systems for large-scale projects such as hospitals, data centers, and high-rise buildings. Built on a foundation of safety, integrity, and technical excellence, this firm offers a collaborative environment where innovation and career growth are encouraged. Every project is driven by a commitment to quality and long-term client relationships. Position Summary The Project Manager is the central point of leadership for all aspects of commercial mechanical construction projects from planning through completion. Youll oversee HVAC, plumbing, and piping scopes, managing budgets, schedules, and teams to ensure projects are completed safely, profitably, and on time. This is a high-impact role ideal for a results-driven professional with strong technical expertise, financial acumen, and leadership skills who thrives in a fast-paced, team-oriented environment. Key Responsibilities Lead mechanical projects from preconstruction to closeout, ensuring adherence to design, budget, and timeline. Develop and maintain project schedules, look-aheads, and cost forecasts to track progress and control expenses. Manage buyout, job cost breakdowns, billings, and cost-to-complete reports. Oversee all RFIs, submittals, change orders, and project documentation, maintaining open communication with clients, vendors, and subcontractors. Coordinate the procurement of mechanical materials and equipment in alignment with project specifications and lead times. Work closely with field Superintendents and Foremen to align manpower plans with construction milestones. Lead preconstruction meetings, progress updates, and closeout sessions for multiple projects simultaneously. Maintain comprehensive electronic documentation and records throughout the project lifecycle. Build lasting client relationships, providing proactive communication and resolution of project issues. Support and enforce all company and OSHA safety protocols on job sites. Qualifications 5+ years of project management experience in commercial mechanical or plumbing construction. Proven success managing large projects such as hospitals, data centers, or high-rise facilities. Strong knowledge of construction financials, cost forecasting, and project closeout procedures. Proficiency in construction management software (Procore, Bluebeam, or similar). Excellent communication, leadership, and organizational skills with the ability to lead cross-functional teams. Bachelors degree in Construction Management, Engineering, or related field preferred; equivalent experience accepted. Valid drivers license and ability to travel locally to project sites as needed. Must meet standard employment screenings. Compensation and Benefits Competitive salary: $90,000 $115,000 annually, based on experience. Company vehicle or mileage reimbursement. 401(k) plan with employer match. Comprehensive health, dental, vision, and life insurance. Paid time off and paid holidays. Tuition reimbursement and professional development programs. Relocation assistance available. Referral bonuses and structured career advancement opportunities into Senior Project Manager or Operations roles. Why Join This Team This is more than a job its a chance to shape large-scale mechanical projects that define Texas skylines. Youll work alongside seasoned professionals in a company that values safety, quality, and long-term relationships. If youre ready to take your career to the next level with a company that invests in your growth, apply today. Equal Opportunity Statement: Applicants with a criminal record are encouraged to apply. All qualified candidates will receive consideration based on experience and ability.
Pay: $24.00 per hour The Engineer 2 oversees the day to day engineering operations in the lodge. This includes but is not limited to project management, general life safety, ordering, working with vendors. Responsible for completing preventative maintenance and repairs through-out the hotel guestrooms, public spaces, equipment, buildings & grounds. Responsibilities: Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Assure each day's activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Ensures that all work performed is conducted in a safe and timely manner adhering to standards of safety and effective equipment utilization. Maintains working knowledge of departmental safety procedures. Attends safety-training programs and in-service as required for continued development. Maintains the necessary service records on mechanical and structural systems. Ensure all standard operating procedures are followed for park operation, employee relations, timekeeping and safety. Including ensuring all daily, weekly and monthly documentation is being completed. Other duties as deemed appropriate by the Assistant Director of Engineering. Qualifications: Technical Degree Technical Training Trade Related Certifications Hospitality, Healthcare or related industry experience Trade related certifications preferred in HVAC and/or Electrical Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Ability to complete work at heights up to 50 feet using ladders, harnesses and lifts. Computer skills including knowledge of database software, internet software, order processing systems, Microsoft Office suite. Valid Driver's License Estimated Salary Range: - $24.00 per hour annual base salary An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, travel requirements, revenue-based metrics, any contractual agreements, and business or organizational needs. The range listed is just one component of Great Wolf's total compensation package. Other rewards may include annual bonuses, a Paid Time Off policy, and other perks. Application Instructions: Click on "Apply Now" or chat with a recruiter (bottom of your screen on Great Wolf's website). After a brief application, all qualified applicants will be immediately invited to setup an interview or attend an upcoming hiring event. Position Close Date: This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, and for inquiring about, discussing or disclosing compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
12/14/2025
Full time
Pay: $24.00 per hour The Engineer 2 oversees the day to day engineering operations in the lodge. This includes but is not limited to project management, general life safety, ordering, working with vendors. Responsible for completing preventative maintenance and repairs through-out the hotel guestrooms, public spaces, equipment, buildings & grounds. Responsibilities: Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Assure each day's activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Ensures that all work performed is conducted in a safe and timely manner adhering to standards of safety and effective equipment utilization. Maintains working knowledge of departmental safety procedures. Attends safety-training programs and in-service as required for continued development. Maintains the necessary service records on mechanical and structural systems. Ensure all standard operating procedures are followed for park operation, employee relations, timekeeping and safety. Including ensuring all daily, weekly and monthly documentation is being completed. Other duties as deemed appropriate by the Assistant Director of Engineering. Qualifications: Technical Degree Technical Training Trade Related Certifications Hospitality, Healthcare or related industry experience Trade related certifications preferred in HVAC and/or Electrical Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Ability to complete work at heights up to 50 feet using ladders, harnesses and lifts. Computer skills including knowledge of database software, internet software, order processing systems, Microsoft Office suite. Valid Driver's License Estimated Salary Range: - $24.00 per hour annual base salary An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, travel requirements, revenue-based metrics, any contractual agreements, and business or organizational needs. The range listed is just one component of Great Wolf's total compensation package. Other rewards may include annual bonuses, a Paid Time Off policy, and other perks. Application Instructions: Click on "Apply Now" or chat with a recruiter (bottom of your screen on Great Wolf's website). After a brief application, all qualified applicants will be immediately invited to setup an interview or attend an upcoming hiring event. Position Close Date: This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, and for inquiring about, discussing or disclosing compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
Pay: $24 per hour At Great Wolf, the Aquatics Technician II oversees the day to day engineering operations in the lodge. This includes but is not limited to project management, general life safety, ordering, working with vendors. Responsible for completing preventative maintenance and repairs through-out the hotel guestrooms, public spaces, equipment, buildings & grounds. Responsibilities: Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Assure each day's activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Ensures that all work performed is conducted in a safe and timely manner adhering to standards of safety and effective equipment utilization. Maintains working knowledge of departmental safety procedures. Attends safety-training programs and in-service as required for continued development. Maintains the necessary service records on mechanical and structural systems. Ensure all standard operating procedures are followed for park operation, employee relations, timekeeping and safety. Including ensuring all daily, weekly and monthly documentation is being completed. Other duties as deemed appropriate by the Assistant Director of Engineering. Qualifications: Technical Degree Technical Training Trade Related Certifications Hospitality, Healthcare or related industry experience Trade related certifications preferred in HVAC and/or Electrical Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Ability to complete work at heights up to 50 feet using ladders, harnesses and lifts. Computer skills including knowledge of database software, internet software, order processing systems, Microsoft Office suite. Valid Driver's License Estimated Salary Range: Pay Rate: $ /hr An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, travel requirements, revenue-based metrics, any contractual agreements, and business or organizational needs. The range listed is just one component of Great Wolf's total compensation package. Other rewards may include annual bonuses, a Paid Time Off policy, and other perks. Application Instructions: Click on "Apply Now" or chat with a recruiter (bottom of your screen on Great Wolf's website). After a brief application, all qualified applicants will be immediately invited to setup an interview or attend an upcoming hiring event. Position Close Date: This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, and for inquiring about, discussing or disclosing compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
12/14/2025
Full time
Pay: $24 per hour At Great Wolf, the Aquatics Technician II oversees the day to day engineering operations in the lodge. This includes but is not limited to project management, general life safety, ordering, working with vendors. Responsible for completing preventative maintenance and repairs through-out the hotel guestrooms, public spaces, equipment, buildings & grounds. Responsibilities: Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Assure each day's activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Ensures that all work performed is conducted in a safe and timely manner adhering to standards of safety and effective equipment utilization. Maintains working knowledge of departmental safety procedures. Attends safety-training programs and in-service as required for continued development. Maintains the necessary service records on mechanical and structural systems. Ensure all standard operating procedures are followed for park operation, employee relations, timekeeping and safety. Including ensuring all daily, weekly and monthly documentation is being completed. Other duties as deemed appropriate by the Assistant Director of Engineering. Qualifications: Technical Degree Technical Training Trade Related Certifications Hospitality, Healthcare or related industry experience Trade related certifications preferred in HVAC and/or Electrical Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Ability to complete work at heights up to 50 feet using ladders, harnesses and lifts. Computer skills including knowledge of database software, internet software, order processing systems, Microsoft Office suite. Valid Driver's License Estimated Salary Range: Pay Rate: $ /hr An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, travel requirements, revenue-based metrics, any contractual agreements, and business or organizational needs. The range listed is just one component of Great Wolf's total compensation package. Other rewards may include annual bonuses, a Paid Time Off policy, and other perks. Application Instructions: Click on "Apply Now" or chat with a recruiter (bottom of your screen on Great Wolf's website). After a brief application, all qualified applicants will be immediately invited to setup an interview or attend an upcoming hiring event. Position Close Date: This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, and for inquiring about, discussing or disclosing compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what's next. Let's define tomorrow, together. Description At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they're well taken care of and ready to get our customers to their desired destinations. If you're ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. The sign-on bonus is exclusively for external candidates, internal applicants are not eligible to receive the sign-on incentive. Key Responsibilities: Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision Journeyman electrical license a plus Requires the ability to make low and high voltage repairs to all building electrical equipment This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions Schedules are bid and awarded according to seniority Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT) Salary increases will be administered according to the current IBT/United contract New employees are required to join the union within ninety (90) days of employment There is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local Lodge Qualifications United values diverse experiences, perspectives, and we encourage everyone who meets the minimum qualifications to apply. While having the "desired" qualifications make for a stronger candidate, we encourage applicants who may not feel they check ALL of those boxes! We are always looking for individuals who will bring something new to the table! What's needed to succeed: Twenty Four months experience required in at least three of the following areas: Electrical (including 480 volt, 3 phase) Structural (including steel frame construction) HVAC (including building management systems) Mechanical (including conveyors) Plumbing PLC electronic/computer controls Must have completed high school diploma, GED or equivalent Ability to maintain and repair all building disciplines, heavy mechanical and welding Work may be indoors or outside or in elevated areas anywhere on airport Must be able to climb and work from ladders, and/or walk for extended periods Moderate lifting Must possess sufficient tooling to perform required tasks Computer experience for input and retrieval of data Qualified candidates must be immediately available for full time employment Must possess a valid, clean, applicable state driver's license What will help you propel from the pack: Electronics diagnostics and troubleshooting United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation. The starting rate for this role is $34.52. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation.
12/14/2025
Full time
Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what's next. Let's define tomorrow, together. Description At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they're well taken care of and ready to get our customers to their desired destinations. If you're ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. The sign-on bonus is exclusively for external candidates, internal applicants are not eligible to receive the sign-on incentive. Key Responsibilities: Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision Journeyman electrical license a plus Requires the ability to make low and high voltage repairs to all building electrical equipment This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions Schedules are bid and awarded according to seniority Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT) Salary increases will be administered according to the current IBT/United contract New employees are required to join the union within ninety (90) days of employment There is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local Lodge Qualifications United values diverse experiences, perspectives, and we encourage everyone who meets the minimum qualifications to apply. While having the "desired" qualifications make for a stronger candidate, we encourage applicants who may not feel they check ALL of those boxes! We are always looking for individuals who will bring something new to the table! What's needed to succeed: Twenty Four months experience required in at least three of the following areas: Electrical (including 480 volt, 3 phase) Structural (including steel frame construction) HVAC (including building management systems) Mechanical (including conveyors) Plumbing PLC electronic/computer controls Must have completed high school diploma, GED or equivalent Ability to maintain and repair all building disciplines, heavy mechanical and welding Work may be indoors or outside or in elevated areas anywhere on airport Must be able to climb and work from ladders, and/or walk for extended periods Moderate lifting Must possess sufficient tooling to perform required tasks Computer experience for input and retrieval of data Qualified candidates must be immediately available for full time employment Must possess a valid, clean, applicable state driver's license What will help you propel from the pack: Electronics diagnostics and troubleshooting United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation. The starting rate for this role is $34.52. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation.
Job Responsibilities:(Need 10+ experience)Perform maintenance, monitoring repairs to the Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems for the facility to keep facility and building systems up to applicable standards as assigned.Travel between multiple facilities, ensuring their proper function.Maintains responsibility for facility services, preventative maintenance, purchasing and inventory control, contracted maintenance, general maintenance, and technical proficiency.Maintenance of the equipment will include cleaning, inspecting, calibrating, and changing parts to maintain the HVAC systems and associated equipment at optimum performance levels.Record readings and make adjustments where necessary to ensure proper operation of (link removed)ply with departmental policy for the safe storage, usage, and disposal of hazardous materials; maintain a clean and safe workplace.Perform periodic checks of tool and instrument inventory.Monitor the quality and pricing of maintenance work performed by outside (link removed)ply with all safety procedures, maintaining good housekeeping and safety of work areas. Recognize danger and safety hazards and propose methods to eliminate them.Qualifications:High School Diploma or Equivalent.5-7 years experience required.Experience maintaining and repairing commercial building systems.Ability to analyze the operation of various Commercial or Industrial Mechanical, Electrical, Plumbing and HVAC systems, determine the cause of any problems/malfunctions and take corrective action.EPA 608 Type II Certification.Working knowledge of computer applications including Word and Excel.Valid driver's license. Preferred:EPA 608 Universal Certification.Two years of trades schooling in electrical system design, refrigeration, and HVACEqual Opportunity Employer We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, national origin, citizenship/ immigration status, veteran status, or any other status protected under federal, state, or local law.
12/14/2025
Job Responsibilities:(Need 10+ experience)Perform maintenance, monitoring repairs to the Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems for the facility to keep facility and building systems up to applicable standards as assigned.Travel between multiple facilities, ensuring their proper function.Maintains responsibility for facility services, preventative maintenance, purchasing and inventory control, contracted maintenance, general maintenance, and technical proficiency.Maintenance of the equipment will include cleaning, inspecting, calibrating, and changing parts to maintain the HVAC systems and associated equipment at optimum performance levels.Record readings and make adjustments where necessary to ensure proper operation of (link removed)ply with departmental policy for the safe storage, usage, and disposal of hazardous materials; maintain a clean and safe workplace.Perform periodic checks of tool and instrument inventory.Monitor the quality and pricing of maintenance work performed by outside (link removed)ply with all safety procedures, maintaining good housekeeping and safety of work areas. Recognize danger and safety hazards and propose methods to eliminate them.Qualifications:High School Diploma or Equivalent.5-7 years experience required.Experience maintaining and repairing commercial building systems.Ability to analyze the operation of various Commercial or Industrial Mechanical, Electrical, Plumbing and HVAC systems, determine the cause of any problems/malfunctions and take corrective action.EPA 608 Type II Certification.Working knowledge of computer applications including Word and Excel.Valid driver's license. Preferred:EPA 608 Universal Certification.Two years of trades schooling in electrical system design, refrigeration, and HVACEqual Opportunity Employer We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, national origin, citizenship/ immigration status, veteran status, or any other status protected under federal, state, or local law.
Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what's next. Let's define tomorrow, together. Description At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they're well taken care of and ready to get our customers to their desired destinations. If you're ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. The sign-on bonus is exclusively for external candidates, internal applicants are not eligible to receive the sign-on incentive. Key Responsibilities: Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision Journeyman electrical license a plus Requires the ability to make low and high voltage repairs to all building electrical equipment This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions Schedules are bid and awarded according to seniority Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT) Salary increases will be administered according to the current IBT/United contract New employees are required to join the union within ninety (90) days of employment There is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local Lodge Qualifications United values diverse experiences, perspectives, and we encourage everyone who meets the minimum qualifications to apply. While having the "desired" qualifications make for a stronger candidate, we encourage applicants who may not feel they check ALL of those boxes! We are always looking for individuals who will bring something new to the table! What's needed to succeed: Twenty Four months experience required in at least three of the following areas: Electrical (including 480 volt, 3 phase) Structural (including steel frame construction) HVAC (including building management systems) Mechanical (including conveyors) Plumbing PLC electronic/computer controls Must have completed high school diploma, GED or equivalent Ability to maintain and repair all building disciplines, heavy mechanical and welding Work may be indoors or outside or in elevated areas anywhere on airport Must be able to climb and work from ladders, and/or walk for extended periods Moderate lifting Must possess sufficient tooling to perform required tasks Computer experience for input and retrieval of data Qualified candidates must be immediately available for full time employment Must possess a valid, clean, applicable state driver's license What will help you propel from the pack: Electronics diagnostics and troubleshooting United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation. The starting rate for this role is $34.52. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation.
12/14/2025
Full time
Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what's next. Let's define tomorrow, together. Description At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they're well taken care of and ready to get our customers to their desired destinations. If you're ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. The sign-on bonus is exclusively for external candidates, internal applicants are not eligible to receive the sign-on incentive. Key Responsibilities: Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision Journeyman electrical license a plus Requires the ability to make low and high voltage repairs to all building electrical equipment This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions Schedules are bid and awarded according to seniority Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT) Salary increases will be administered according to the current IBT/United contract New employees are required to join the union within ninety (90) days of employment There is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local Lodge Qualifications United values diverse experiences, perspectives, and we encourage everyone who meets the minimum qualifications to apply. While having the "desired" qualifications make for a stronger candidate, we encourage applicants who may not feel they check ALL of those boxes! We are always looking for individuals who will bring something new to the table! What's needed to succeed: Twenty Four months experience required in at least three of the following areas: Electrical (including 480 volt, 3 phase) Structural (including steel frame construction) HVAC (including building management systems) Mechanical (including conveyors) Plumbing PLC electronic/computer controls Must have completed high school diploma, GED or equivalent Ability to maintain and repair all building disciplines, heavy mechanical and welding Work may be indoors or outside or in elevated areas anywhere on airport Must be able to climb and work from ladders, and/or walk for extended periods Moderate lifting Must possess sufficient tooling to perform required tasks Computer experience for input and retrieval of data Qualified candidates must be immediately available for full time employment Must possess a valid, clean, applicable state driver's license What will help you propel from the pack: Electronics diagnostics and troubleshooting United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation. The starting rate for this role is $34.52. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation.
Description: At Breen & Sullivan Mechanical Services , we design, build, and maintain the systems that keep buildings running - from HVAC to plumbing and electrical solutions. With decades of experience serving both residential and commercial clients, we're known for our craftsmanship, reliability, and commitment to excellence. Our culture is collaborative, growth-minded, and built around delivering top-quality results and exceptional customer experiences. Position Summary: We're looking for a Project Sales Engineer to help grow our installation division - specializing in either HVAC or Plumbing & Piping solutions. This is a client-facing role for a technically savvy and relationship-driven professional who thrives on turning opportunities into successful projects. If you're motivated by building strong partnerships, solving complex challenges, and seeing your work come to life in the field, this is the role for you. Key Responsibilities: Develop and maintain long-term relationships with residential and commercial clients. Conduct site visits to assess project needs and recommend the right system or solution. Prepare proposals, technical presentations, and accurate cost estimates. Collaborate with internal teams - engineering, project management, and service - to ensure smooth handoffs and outstanding project outcomes. Meet or exceed sales targets while contributing to company growth. Stay ahead of industry trends, energy-efficient technologies, and new product innovations. Participate in kickoff meetings and planning sessions for key projects. Focus Areas: HVAC Sales: Promote solutions involving chillers, VRF, RTUs, air handlers, and controls. Provide technical insight for energy-efficient retrofits and replacements. Interpret drawings and specifications to prepare accurate proposals. Plumbing & Piping Sales: Develop system solutions for domestic water, boilers, sanitary, storm, process, and gas piping. Support both new construction and retrofit projects with technical expertise. Translate plans and specs into accurate scopes of work and estimates. Requirements: Requirements: Proven experience in mechanical, HVAC, or plumbing/piping sales. Strong technical understanding and confidence in customer-facing discussions. Excellent communication, negotiation, and relationship-building skills. Self-motivated, organized, and results-driven. Valid driver's license with regular job site travel. Experience with CRM/ERP systems and Microsoft Office preferred. Eligibility Requirements This position requires a valid driver's license and reliable transportation. Employment/education will be verified. Applicants must be currently authorized to work in the United States on a full-time basis. Breen is a drug free workplace and requires post-offer pre-employment drug testing. Why You'll Love Working Here: Competitive base salary + commission structure. Health, dental, and vision insurance. Retirement plan. Paid time off and holidays. Vehicle stipend. Professional development and growth opportunities in a supportive, team-driven culture. Great supportive team. Breen and Sullivan complies with applicable Federal civil rights laws and does not discriminate on the basis of race, color, national origin, age, disability, or sex. Breen and Sullivan does not exclude people or treat them differently because of race, color, national origin, age, disability, or sex. Refrigeration: RC148185 3 Plumbing: 3378 AA/EOE PIeecd-1734
12/12/2025
Full time
Description: At Breen & Sullivan Mechanical Services , we design, build, and maintain the systems that keep buildings running - from HVAC to plumbing and electrical solutions. With decades of experience serving both residential and commercial clients, we're known for our craftsmanship, reliability, and commitment to excellence. Our culture is collaborative, growth-minded, and built around delivering top-quality results and exceptional customer experiences. Position Summary: We're looking for a Project Sales Engineer to help grow our installation division - specializing in either HVAC or Plumbing & Piping solutions. This is a client-facing role for a technically savvy and relationship-driven professional who thrives on turning opportunities into successful projects. If you're motivated by building strong partnerships, solving complex challenges, and seeing your work come to life in the field, this is the role for you. Key Responsibilities: Develop and maintain long-term relationships with residential and commercial clients. Conduct site visits to assess project needs and recommend the right system or solution. Prepare proposals, technical presentations, and accurate cost estimates. Collaborate with internal teams - engineering, project management, and service - to ensure smooth handoffs and outstanding project outcomes. Meet or exceed sales targets while contributing to company growth. Stay ahead of industry trends, energy-efficient technologies, and new product innovations. Participate in kickoff meetings and planning sessions for key projects. Focus Areas: HVAC Sales: Promote solutions involving chillers, VRF, RTUs, air handlers, and controls. Provide technical insight for energy-efficient retrofits and replacements. Interpret drawings and specifications to prepare accurate proposals. Plumbing & Piping Sales: Develop system solutions for domestic water, boilers, sanitary, storm, process, and gas piping. Support both new construction and retrofit projects with technical expertise. Translate plans and specs into accurate scopes of work and estimates. Requirements: Requirements: Proven experience in mechanical, HVAC, or plumbing/piping sales. Strong technical understanding and confidence in customer-facing discussions. Excellent communication, negotiation, and relationship-building skills. Self-motivated, organized, and results-driven. Valid driver's license with regular job site travel. Experience with CRM/ERP systems and Microsoft Office preferred. Eligibility Requirements This position requires a valid driver's license and reliable transportation. Employment/education will be verified. Applicants must be currently authorized to work in the United States on a full-time basis. Breen is a drug free workplace and requires post-offer pre-employment drug testing. Why You'll Love Working Here: Competitive base salary + commission structure. Health, dental, and vision insurance. Retirement plan. Paid time off and holidays. Vehicle stipend. Professional development and growth opportunities in a supportive, team-driven culture. Great supportive team. Breen and Sullivan complies with applicable Federal civil rights laws and does not discriminate on the basis of race, color, national origin, age, disability, or sex. Breen and Sullivan does not exclude people or treat them differently because of race, color, national origin, age, disability, or sex. Refrigeration: RC148185 3 Plumbing: 3378 AA/EOE PIeecd-1734
Overview: To direct, oversee and coordinate all phases of maintenance and construction at Worlds of Fun, Oceans of Fun and Worlds of Fun Village including mechanical, electrical, HVAC, landscaping, electronic, carpentry, painting, fiberglassing, and plumbing. Responsibilities: -Participates in long-term construction planning for new park projects. Oversees all construction projects. Negotiates contracts for, schedules and coordinates contractors, engineers and architects supplying services and/or materials to ensure completion of maintenance and construction projects on time and within budget. Helps establish scope of work and makes sure contractors provide the required work in a timely manner. Coordinates details of construction projects with the directors and/or managers of other departments as appropriate. Works with Cedar Fair Corporate to make sure that projects are completed on time, on budget and as designed. -Oversees and participates in the selection, training, scheduling and supervision of all Maintenance employees to make sure they are knowledgeable of and proficient in proper procedures including those involving safety issues. Ensures strict compliance with all federal, state and municipal labor laws as well as with any collective bargaining agreement(s) in force. -Manages employee performance utilizing all appropriate means including training, coaching, counseling and performance management. Addresses and fairly resolves employee problems including union grievances within the frameworks of the collective bargaining agreement and company policies. Participates in collective bargaining agreement negotiations. -Communicates division status to Vice President & General Manager on an ongoing basis, including operational issues, employee concerns, guest complaints, special requests, losses and any other unusual situations in order to maintain smooth operations. -Directs and participates in the the preparation of all labor, operating expense, capital and EWO budgets for the division. Monitors financial reports regularly and takes corrective action when needed. -Regularly and accurately reports to management the status of all projects being supervised. -Communicates with manufacturers and other outside vendors to resolve difficulties and to ensure the safest possible operation and maintenance of rides, attractions and equipment. Communicates with Cedar Fair Safety/Engineering on ride-related issues and to provide needed assistance. Researches, bids and oversees the procurement of materials and/or services involved in maintenance and construction projects. -Interfaces with (and may act as the Worlds of Fun representative with) various governmental agencies on a routine basis to ensure park's compliance with federal, state and local laws and regulations. These agencies include OSHA, EPA, Missouri Department of Natural Resources, and the Missouri Fire Safety Department, as well as the KCMO Planning & Development and Public Health Departments. -Develops and implements a plan to ensure that all park property, facilities, rides, landscape, and equipment are installed, maintained and, when necessary, repaired in a safe, reliable and cost effective manner. This includes: inspecting all areas of the parks to identify issues determining priorities determining materials needed and negotiating purchase terms assigning schedules selecting outside contractors Installing a preventative/predictive maintenance system so that safety and uptime are maximized. Ensuring the parts warehouse has the proper inventory levels. Establishing min/max levels to those parts inventories to maximize uptime. Ensuring all maintenance employees are properly trained to perform maintenance on the rides. This includes specialization, preventative maintenance and timely repairs of good quality. Qualifications: Strong interpersonal, verbal and written communication and analytic skills. Demonstrated mental and emotional capability to make sound decisions quickly during emergency situations. B.A. Engineering, Sciences, or Project Management 6-10 years of experience in theme/amusement/water park maintenance Extensive knowledge and understanding of electrical, mechanical, and structural maintenance including applicable codes Ability to pass a mandatory (or random) drug test, per Company policy, unless prohibited by state or provincial law. Ability to pass a background check, if 18 years of age or older, which may include, but is not limited to, credit, criminal, DMV, previous employment, education and personal references, per Company policy, unless prohibited by federal, state, or provincial law. Ability to work nights, weekends and holiday periods to meet business needs. Driver's License
12/12/2025
Full time
Overview: To direct, oversee and coordinate all phases of maintenance and construction at Worlds of Fun, Oceans of Fun and Worlds of Fun Village including mechanical, electrical, HVAC, landscaping, electronic, carpentry, painting, fiberglassing, and plumbing. Responsibilities: -Participates in long-term construction planning for new park projects. Oversees all construction projects. Negotiates contracts for, schedules and coordinates contractors, engineers and architects supplying services and/or materials to ensure completion of maintenance and construction projects on time and within budget. Helps establish scope of work and makes sure contractors provide the required work in a timely manner. Coordinates details of construction projects with the directors and/or managers of other departments as appropriate. Works with Cedar Fair Corporate to make sure that projects are completed on time, on budget and as designed. -Oversees and participates in the selection, training, scheduling and supervision of all Maintenance employees to make sure they are knowledgeable of and proficient in proper procedures including those involving safety issues. Ensures strict compliance with all federal, state and municipal labor laws as well as with any collective bargaining agreement(s) in force. -Manages employee performance utilizing all appropriate means including training, coaching, counseling and performance management. Addresses and fairly resolves employee problems including union grievances within the frameworks of the collective bargaining agreement and company policies. Participates in collective bargaining agreement negotiations. -Communicates division status to Vice President & General Manager on an ongoing basis, including operational issues, employee concerns, guest complaints, special requests, losses and any other unusual situations in order to maintain smooth operations. -Directs and participates in the the preparation of all labor, operating expense, capital and EWO budgets for the division. Monitors financial reports regularly and takes corrective action when needed. -Regularly and accurately reports to management the status of all projects being supervised. -Communicates with manufacturers and other outside vendors to resolve difficulties and to ensure the safest possible operation and maintenance of rides, attractions and equipment. Communicates with Cedar Fair Safety/Engineering on ride-related issues and to provide needed assistance. Researches, bids and oversees the procurement of materials and/or services involved in maintenance and construction projects. -Interfaces with (and may act as the Worlds of Fun representative with) various governmental agencies on a routine basis to ensure park's compliance with federal, state and local laws and regulations. These agencies include OSHA, EPA, Missouri Department of Natural Resources, and the Missouri Fire Safety Department, as well as the KCMO Planning & Development and Public Health Departments. -Develops and implements a plan to ensure that all park property, facilities, rides, landscape, and equipment are installed, maintained and, when necessary, repaired in a safe, reliable and cost effective manner. This includes: inspecting all areas of the parks to identify issues determining priorities determining materials needed and negotiating purchase terms assigning schedules selecting outside contractors Installing a preventative/predictive maintenance system so that safety and uptime are maximized. Ensuring the parts warehouse has the proper inventory levels. Establishing min/max levels to those parts inventories to maximize uptime. Ensuring all maintenance employees are properly trained to perform maintenance on the rides. This includes specialization, preventative maintenance and timely repairs of good quality. Qualifications: Strong interpersonal, verbal and written communication and analytic skills. Demonstrated mental and emotional capability to make sound decisions quickly during emergency situations. B.A. Engineering, Sciences, or Project Management 6-10 years of experience in theme/amusement/water park maintenance Extensive knowledge and understanding of electrical, mechanical, and structural maintenance including applicable codes Ability to pass a mandatory (or random) drug test, per Company policy, unless prohibited by state or provincial law. Ability to pass a background check, if 18 years of age or older, which may include, but is not limited to, credit, criminal, DMV, previous employment, education and personal references, per Company policy, unless prohibited by federal, state, or provincial law. Ability to work nights, weekends and holiday periods to meet business needs. Driver's License
Company Overview Upchurch is a rapidly growing , full-service building engineering company providing mechanical, plumbing, HVAC, and electrical services across the southeastern United States. Founded in 1970 and headquartered in Horn Lake, MS, Upchurch has grown through both organic expansion and strategic acquisitions , establishing a strong reputation for quality, reliability, and service excellence. We offer end-to-end solutions-from design and installation to ongoing maintenance and emergency support- helping clients maximize building performance, energy efficiency, and equipment lifespan . Position Summary The BIM/Field Engineer bridges modeling and field execution . You'll translate coordinated models and shop drawings into accurate layout and installation in the field, resolve clashes/RFIs with project teams, and keep as-builts and documentation current so work stays safe, on schedule, and to spec . Key Responsibilities Model & Document Control: Update and manage coordinated models (Revit/Navisworks), shop drawings, submittals, and as-builts; maintain version control in BIM 360/Autodesk Construction Cloud. Field Layout: Generate points and run total station/robotic layout (Trimble/Leica) for sleeves, embeds, hangers, racks, and equipment; verify elevations, slopes, and tolerances. Clash Coordination: Lead/participate in coordination meetings; track issues, create RFIs, and drive timely resolutions with GC, design team, and trades. Installation Support: Produce spool sheets, installation details, and pull sheets; ensure material readiness, accurate takeoffs, and field-ready information. QA/QC & Commissioning Support: Perform in-field checks against plans/specs; assist with testing, start-up, and turnover packages; keep redlines current. VDC-to-Field Workflow: Convert model data into practical work packages and look-ahead plans; align with superintendent/foreman on daily priorities. Data Capture: Perform laser scans/point clouds (where applicable); reconcile scans to model for clash avoidance and progress verification. Reporting & Controls: Track quantities, earned vs. spent hours (basic productivity metrics), and update weekly progress photos/logs. Safety & Compliance: Follow site safety protocols (JHAs, PPE) and enforce model/field changes through approved processes. Qualifications Education/Experience: BS in Construction Management, Engineering (ME/EE/CE), Architecture, or equivalent and 2-5 years in BIM/VDC or field engineering (MEP or GC). Strong craft/field exposure may substitute for degree. Software: Proficiency in Revit and Navisworks ; working knowledge of BIM 360/ACC, Bluebeam, Procore/PlanGrid, AutoCAD; point layout tools (Trimble/Leica) preferred. Technical Skills: Read/interpret plans, sections, details, and specs; generate layout points; understand tolerances, slopes, and MEP system basics (supports, sleeves, penetrations). Coordination: RFI writing, issue tracking, and cross-trade communication; comfortable presenting in coordination meetings. Field Aptitude: Comfortable on active jobsites, verifying dimensions, and supporting crews; able to lift/handle equipment and work at heights as needed. Certifications (Nice-to-Have): OSHA 10/30, FAA Part 107 (drone), Laser scanning experience, PE/EIT or CMIT a plus. Soft Skills: Organized, detail-driven, proactive problem solver with solid written/verbal communication and a safety-first mindset. Benefits: Competitive salary based on experience. Health, dental, and vision insurance. Paid time off and holiday pay. Opportunities for professional development and certification assistance. Equal Employment Opportunity: Upchurch Companies provides equal employment opportunities to all employees and applicants. We prohibit discrimination and harassment of any type based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
12/07/2025
Full time
Company Overview Upchurch is a rapidly growing , full-service building engineering company providing mechanical, plumbing, HVAC, and electrical services across the southeastern United States. Founded in 1970 and headquartered in Horn Lake, MS, Upchurch has grown through both organic expansion and strategic acquisitions , establishing a strong reputation for quality, reliability, and service excellence. We offer end-to-end solutions-from design and installation to ongoing maintenance and emergency support- helping clients maximize building performance, energy efficiency, and equipment lifespan . Position Summary The BIM/Field Engineer bridges modeling and field execution . You'll translate coordinated models and shop drawings into accurate layout and installation in the field, resolve clashes/RFIs with project teams, and keep as-builts and documentation current so work stays safe, on schedule, and to spec . Key Responsibilities Model & Document Control: Update and manage coordinated models (Revit/Navisworks), shop drawings, submittals, and as-builts; maintain version control in BIM 360/Autodesk Construction Cloud. Field Layout: Generate points and run total station/robotic layout (Trimble/Leica) for sleeves, embeds, hangers, racks, and equipment; verify elevations, slopes, and tolerances. Clash Coordination: Lead/participate in coordination meetings; track issues, create RFIs, and drive timely resolutions with GC, design team, and trades. Installation Support: Produce spool sheets, installation details, and pull sheets; ensure material readiness, accurate takeoffs, and field-ready information. QA/QC & Commissioning Support: Perform in-field checks against plans/specs; assist with testing, start-up, and turnover packages; keep redlines current. VDC-to-Field Workflow: Convert model data into practical work packages and look-ahead plans; align with superintendent/foreman on daily priorities. Data Capture: Perform laser scans/point clouds (where applicable); reconcile scans to model for clash avoidance and progress verification. Reporting & Controls: Track quantities, earned vs. spent hours (basic productivity metrics), and update weekly progress photos/logs. Safety & Compliance: Follow site safety protocols (JHAs, PPE) and enforce model/field changes through approved processes. Qualifications Education/Experience: BS in Construction Management, Engineering (ME/EE/CE), Architecture, or equivalent and 2-5 years in BIM/VDC or field engineering (MEP or GC). Strong craft/field exposure may substitute for degree. Software: Proficiency in Revit and Navisworks ; working knowledge of BIM 360/ACC, Bluebeam, Procore/PlanGrid, AutoCAD; point layout tools (Trimble/Leica) preferred. Technical Skills: Read/interpret plans, sections, details, and specs; generate layout points; understand tolerances, slopes, and MEP system basics (supports, sleeves, penetrations). Coordination: RFI writing, issue tracking, and cross-trade communication; comfortable presenting in coordination meetings. Field Aptitude: Comfortable on active jobsites, verifying dimensions, and supporting crews; able to lift/handle equipment and work at heights as needed. Certifications (Nice-to-Have): OSHA 10/30, FAA Part 107 (drone), Laser scanning experience, PE/EIT or CMIT a plus. Soft Skills: Organized, detail-driven, proactive problem solver with solid written/verbal communication and a safety-first mindset. Benefits: Competitive salary based on experience. Health, dental, and vision insurance. Paid time off and holiday pay. Opportunities for professional development and certification assistance. Equal Employment Opportunity: Upchurch Companies provides equal employment opportunities to all employees and applicants. We prohibit discrimination and harassment of any type based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Responsibilities:
Conducting walk-throughs and visually assessing the safe and efficient maintenance and operation of the physical structure of the hotel, all mechanical, electrical, HVAC systems, and any other related equipment
Informing the GM and hotel department heads on a regular basis regarding the specific and overall condition of the building structure, related systems, and equipment, and offering prudent, cost-effective proposals for maintaining these systems
Ensuring all projects, including, but not limited to, routine maintenance, repairs, replacement, and renovation projects, are completed on time and according to specifications
Maintaining effective Energy Management and Preventative Maintenance programs, and conducting special training for other operating departments on the safe and efficient use of equipment and energy in the hotel
Working closely with other departments to ensure coordination of activities. Supervising Engineering associates, including assisting with hiring, training, evaluations, development, and disciplining
Preparing and adjusting weekly work schedules in accordance with staff guidelines and labor forecasts
Assisting with processing requests for personal time off, holidays for team members, schedule changes, overtime, purchase requests, and expenditures
Reviewing guest comments and ensuring that problems are identified and corrected in a timely manner
Responding to guest requests in a timely, professional, and friendly manner to help ensure that we are meeting or exceeding guest expectations
Acting as the safety coordinator for the entire hotel, including ensuring that all emergency equipment and systems are inspected, tested, and certified per standards
Maintaining a safe working environment throughout the hotel for all associates, enforcing safety guidelines, and building awareness about safety
Ensuring compliance with OSHA and fire Safety Laws
Assessing critical repairs and facilitating an immediate and cost-effective response
Implementing and managing procedures and practices that ensure quality assurance for work performed by hotel maintenance teams
Ensuring that there is an adequate inventory of parts, supplies, tools, and materials available through effective ordering
Qualifications:
The ideal Engineering Supervisor candidate will have previous hotel and supervisory experience. We are looking for a high-energy, motivated individual who will take ownership and who has the organizational skills to manage several tasks at once and lead a team
Minimum of 2 years of experience as an Engineer in a hotel
Possess a thorough knowledge of all types of mechanical equipment, such as chillers, boilers, water softeners, and refrigeration equipment
Possesses extensive working knowledge of building systems to include but not limited to: HVAC, electrical, mechanical, plumbing, painting, and carpentry
Demonstrate excellent supervisory and interpersonal skills
08/02/2025
Full time
Responsibilities:
Conducting walk-throughs and visually assessing the safe and efficient maintenance and operation of the physical structure of the hotel, all mechanical, electrical, HVAC systems, and any other related equipment
Informing the GM and hotel department heads on a regular basis regarding the specific and overall condition of the building structure, related systems, and equipment, and offering prudent, cost-effective proposals for maintaining these systems
Ensuring all projects, including, but not limited to, routine maintenance, repairs, replacement, and renovation projects, are completed on time and according to specifications
Maintaining effective Energy Management and Preventative Maintenance programs, and conducting special training for other operating departments on the safe and efficient use of equipment and energy in the hotel
Working closely with other departments to ensure coordination of activities. Supervising Engineering associates, including assisting with hiring, training, evaluations, development, and disciplining
Preparing and adjusting weekly work schedules in accordance with staff guidelines and labor forecasts
Assisting with processing requests for personal time off, holidays for team members, schedule changes, overtime, purchase requests, and expenditures
Reviewing guest comments and ensuring that problems are identified and corrected in a timely manner
Responding to guest requests in a timely, professional, and friendly manner to help ensure that we are meeting or exceeding guest expectations
Acting as the safety coordinator for the entire hotel, including ensuring that all emergency equipment and systems are inspected, tested, and certified per standards
Maintaining a safe working environment throughout the hotel for all associates, enforcing safety guidelines, and building awareness about safety
Ensuring compliance with OSHA and fire Safety Laws
Assessing critical repairs and facilitating an immediate and cost-effective response
Implementing and managing procedures and practices that ensure quality assurance for work performed by hotel maintenance teams
Ensuring that there is an adequate inventory of parts, supplies, tools, and materials available through effective ordering
Qualifications:
The ideal Engineering Supervisor candidate will have previous hotel and supervisory experience. We are looking for a high-energy, motivated individual who will take ownership and who has the organizational skills to manage several tasks at once and lead a team
Minimum of 2 years of experience as an Engineer in a hotel
Possess a thorough knowledge of all types of mechanical equipment, such as chillers, boilers, water softeners, and refrigeration equipment
Possesses extensive working knowledge of building systems to include but not limited to: HVAC, electrical, mechanical, plumbing, painting, and carpentry
Demonstrate excellent supervisory and interpersonal skills
