Field Service Engineer I - Semiconductor US-OR-Gresham Job ID: 33692 Type: Full-Time # of Openings: 1 Category: Engineering Additional Locations CUS About the Role Canon U.S.A., Inc. has an exciting opportunity in Oregon to support our photolithography equipment customers and enable them to utilize cutting edge technology in their semiconductor manufacturing process. You will be trained to support Canon's lithography equipment (steppers and scanners). This position will be based in Oregon but will also travel to support other US locations. NOTE: Weekly scheduled hours will vary 35 - 40 hours/week with occasional overtime as needed. Your Impact Install, repair, calibrate and maintain semiconductor process equipment while minimizing equipment down time. Escalate advanced repairs as needed, to senior level technicians. Monitor, inspect and maintain semiconductor equipment in order to prevent and minimize malfunctions. Maintain accurate documentation of maintenance activity and provide periodic reports Monitor stock level of service parts and equipment to ensure adequate inventory is available for repair work. Provide training and assistance to technicians and may provide basic instruction to customers. Participate in ongoing technical training to expand technical expertise. About You: The Skills & Expertise You Bring Please note: This is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19. HS diploma, GED, or equivalent experience required, plus less than 1 year of related (electromechanical) work experience (i.e. field service engineer or technician position in a semiconductor equipment company or a technical position in the engineering field). Lithography experience is beneficial but not required and experience on high precision equipment helpful.May require upwards of 40% overnight travel (valid driver's license and acceptable driving record necessary). Requires MS Word, Excel, and PowerPoint. Position will require travel to other offices/customer sites within the US. Requires ability to work flexible shifts, compressed workweeks.This position requires driving for company business as an essential function of the job and must remain in compliance with company safety guidelines and policies.Requires ability to lift up to 30 pounds individually and for lifting over 30 pounds assistance may be available.Substantial amount of standing, walking, typing, grasping, talking and hearing. Substantial amount of driving required, sometime for multiple hours at a time.Occasionally kneeling, crouching, stooping, reaching, pushing, pulling and climbing stairs or ladder.The worker is required to have close visual acuity with or without corrective lenses for extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Working primarily in a cleanroom environment (wearing full clean room suit, facemask, gloves, safety glasses).The work environment may include a variety of physical conditions such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to chemicals, ultraviolet light and lasers, working in enclosed spaces, close quarters, narrow aisles or passageways.The work environment may include working in highly time sensitive situations requiring quick resolution including equipment problems. We are providing the anticipated rate for this role: $27.88 - $41.75 hourly Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PIfc85bfb6728e-3695
12/20/2025
Full time
Field Service Engineer I - Semiconductor US-OR-Gresham Job ID: 33692 Type: Full-Time # of Openings: 1 Category: Engineering Additional Locations CUS About the Role Canon U.S.A., Inc. has an exciting opportunity in Oregon to support our photolithography equipment customers and enable them to utilize cutting edge technology in their semiconductor manufacturing process. You will be trained to support Canon's lithography equipment (steppers and scanners). This position will be based in Oregon but will also travel to support other US locations. NOTE: Weekly scheduled hours will vary 35 - 40 hours/week with occasional overtime as needed. Your Impact Install, repair, calibrate and maintain semiconductor process equipment while minimizing equipment down time. Escalate advanced repairs as needed, to senior level technicians. Monitor, inspect and maintain semiconductor equipment in order to prevent and minimize malfunctions. Maintain accurate documentation of maintenance activity and provide periodic reports Monitor stock level of service parts and equipment to ensure adequate inventory is available for repair work. Provide training and assistance to technicians and may provide basic instruction to customers. Participate in ongoing technical training to expand technical expertise. About You: The Skills & Expertise You Bring Please note: This is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19. HS diploma, GED, or equivalent experience required, plus less than 1 year of related (electromechanical) work experience (i.e. field service engineer or technician position in a semiconductor equipment company or a technical position in the engineering field). Lithography experience is beneficial but not required and experience on high precision equipment helpful.May require upwards of 40% overnight travel (valid driver's license and acceptable driving record necessary). Requires MS Word, Excel, and PowerPoint. Position will require travel to other offices/customer sites within the US. Requires ability to work flexible shifts, compressed workweeks.This position requires driving for company business as an essential function of the job and must remain in compliance with company safety guidelines and policies.Requires ability to lift up to 30 pounds individually and for lifting over 30 pounds assistance may be available.Substantial amount of standing, walking, typing, grasping, talking and hearing. Substantial amount of driving required, sometime for multiple hours at a time.Occasionally kneeling, crouching, stooping, reaching, pushing, pulling and climbing stairs or ladder.The worker is required to have close visual acuity with or without corrective lenses for extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Working primarily in a cleanroom environment (wearing full clean room suit, facemask, gloves, safety glasses).The work environment may include a variety of physical conditions such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to chemicals, ultraviolet light and lasers, working in enclosed spaces, close quarters, narrow aisles or passageways.The work environment may include working in highly time sensitive situations requiring quick resolution including equipment problems. We are providing the anticipated rate for this role: $27.88 - $41.75 hourly Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PIfc85bfb6728e-3695
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Defense, Space & Security (BDS) Phantom Works is seeking a Signature Management Engineering Lead to join our team in Berkeley, MO. Phantom Works is Boeing Defense's advanced design division that is responsible for designing, building, and testing the future capabilities for our Nation's defense. The Phantom Works' portfolio has grown significantly over the past few years, and we need to grow our team to solve some of the toughest challenges. This signature management engineering position will lead a multi-discipline team to implement and support software development to meet internal and external customer requirements for production and sustainment efforts. The ideal candidate should have a solid understanding of ways to estimate system signatures, knowledge of tier level assessments, defect characterization, and calculation of impacts of defects. Experience with current systems is a plus. Experience with condition-based maintenance and maintenance processes are beneficial. A background in software development is desired. Position Responsibilities: Lead a development team Develop and validate requirements Support the greater Survivability team Participate in Model Based System Engineering modeling of use-cases, behaviors, and software requirements Direct multi-discipline trades studies Work with suppliers and customers (internal & external) to ensure compliance with technical requirements Make final decisions on user-based requirements Candidates must be able to positively interact with a wide range of personnel across multiple disciplines Disseminate results and status to project stakeholders Candidate may be representing the Boeing Company to Government Customers and/or suppliers Candidate will document requirements and Statements of Work (SOWs) when needed Strong organization and documentation skills will be needed to manage multiple simultaneous projects in various states of maturity and/or multiple activities within a single project Basic Qualifications: Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement. 14+ years of related work experience and a bachelor's degree or an equivalent combination of related work experience and technical education Familiarity with one or more of the following is expected: Signature Rollup Processes, Signature Test Data Processing, Signature Data Visualization Relocation: This position offers relocation based on candidate eligibility. Note: Basic relocation will be offered for eligible internal candidates. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $154,700-$209,300 Applications for this position will be accepted until Dec. 31, 2025 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Contingent Upon Program Reward The position is contingent upon program award Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
12/20/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Defense, Space & Security (BDS) Phantom Works is seeking a Signature Management Engineering Lead to join our team in Berkeley, MO. Phantom Works is Boeing Defense's advanced design division that is responsible for designing, building, and testing the future capabilities for our Nation's defense. The Phantom Works' portfolio has grown significantly over the past few years, and we need to grow our team to solve some of the toughest challenges. This signature management engineering position will lead a multi-discipline team to implement and support software development to meet internal and external customer requirements for production and sustainment efforts. The ideal candidate should have a solid understanding of ways to estimate system signatures, knowledge of tier level assessments, defect characterization, and calculation of impacts of defects. Experience with current systems is a plus. Experience with condition-based maintenance and maintenance processes are beneficial. A background in software development is desired. Position Responsibilities: Lead a development team Develop and validate requirements Support the greater Survivability team Participate in Model Based System Engineering modeling of use-cases, behaviors, and software requirements Direct multi-discipline trades studies Work with suppliers and customers (internal & external) to ensure compliance with technical requirements Make final decisions on user-based requirements Candidates must be able to positively interact with a wide range of personnel across multiple disciplines Disseminate results and status to project stakeholders Candidate may be representing the Boeing Company to Government Customers and/or suppliers Candidate will document requirements and Statements of Work (SOWs) when needed Strong organization and documentation skills will be needed to manage multiple simultaneous projects in various states of maturity and/or multiple activities within a single project Basic Qualifications: Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement. 14+ years of related work experience and a bachelor's degree or an equivalent combination of related work experience and technical education Familiarity with one or more of the following is expected: Signature Rollup Processes, Signature Test Data Processing, Signature Data Visualization Relocation: This position offers relocation based on candidate eligibility. Note: Basic relocation will be offered for eligible internal candidates. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $154,700-$209,300 Applications for this position will be accepted until Dec. 31, 2025 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Contingent Upon Program Reward The position is contingent upon program award Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Test & Evaluation (BT&E) team is seeking a Mechanical Systems Design & Analysis Engineer to join our team in Saint Charles, MO. On the BT&E Test Operations & Engineering team, the design engineer has the primary responsibility for the synthesis of requirements, creation of engineering definition, 3D modeling, 2D drawing creation, and model-based definition development that defines the mechanical hardware required to install a flight test data system. This position has a focus on the design of flight test instrumentation hardware to meet the test requirements of Weapons program customers including Joint Direct Attack Munitions (JDAM), Small Diameter Bomb (SDB), Massive Ordinance Penetrator (MOP), and other derivative programs. The mechanical designers work the entire design cycle including support of requirement definition, layouts, coordination with electrical designers, preliminary design review, engineering release, coordination with manufacturing engineers and suppliers, occasional shipside support, and change incorporation. BT&E is currently hiring for a broad range of experience levels including Experienced and Senior level Mechanical System Design & Analysis Engineers. Position Responsibilities Include: Lead the development and documentation of mechanical and fluid system and thermal environment Lead the development, maintenance or modification of system designs/proposals to provide design documentation and high-level requirements to downstream users/customers Perform detailed design development and modification of mechanical and fluid system installations Lead team in performing spatial integration at system or component level and modification of mechanisms/ordinance systems Prepare technical documents for mechanical components and systems Prepare proposal and new business development efforts Work with test program management for work estimation and intake process Delegate tasks to design team and provide supervision to junior engineers Basic Qualifications (Required Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science 5+ years of experience in mechanical systems design Experience with and proficient in Microsoft Office Suite Preferred Qualifications (Desired Skills/Experience): Level 4: 9 or more years of related work experience or an equivalent combination of education and experience Bachelor degree or higher in Mechanical or Aerospace Engineering Active U.S. Security Clearance in the past 24 months Experience in test and evaluation Knowledge/familiarity with additive manufacturing processes & tools Proficiency in Siemens NX Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range for Experienced level: $95,200 - $128,800 Summary Pay Range for Senior level: $115,600 - $156,400 Applications for this position will be accepted until Jan. 05, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
12/20/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Test & Evaluation (BT&E) team is seeking a Mechanical Systems Design & Analysis Engineer to join our team in Saint Charles, MO. On the BT&E Test Operations & Engineering team, the design engineer has the primary responsibility for the synthesis of requirements, creation of engineering definition, 3D modeling, 2D drawing creation, and model-based definition development that defines the mechanical hardware required to install a flight test data system. This position has a focus on the design of flight test instrumentation hardware to meet the test requirements of Weapons program customers including Joint Direct Attack Munitions (JDAM), Small Diameter Bomb (SDB), Massive Ordinance Penetrator (MOP), and other derivative programs. The mechanical designers work the entire design cycle including support of requirement definition, layouts, coordination with electrical designers, preliminary design review, engineering release, coordination with manufacturing engineers and suppliers, occasional shipside support, and change incorporation. BT&E is currently hiring for a broad range of experience levels including Experienced and Senior level Mechanical System Design & Analysis Engineers. Position Responsibilities Include: Lead the development and documentation of mechanical and fluid system and thermal environment Lead the development, maintenance or modification of system designs/proposals to provide design documentation and high-level requirements to downstream users/customers Perform detailed design development and modification of mechanical and fluid system installations Lead team in performing spatial integration at system or component level and modification of mechanisms/ordinance systems Prepare technical documents for mechanical components and systems Prepare proposal and new business development efforts Work with test program management for work estimation and intake process Delegate tasks to design team and provide supervision to junior engineers Basic Qualifications (Required Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science 5+ years of experience in mechanical systems design Experience with and proficient in Microsoft Office Suite Preferred Qualifications (Desired Skills/Experience): Level 4: 9 or more years of related work experience or an equivalent combination of education and experience Bachelor degree or higher in Mechanical or Aerospace Engineering Active U.S. Security Clearance in the past 24 months Experience in test and evaluation Knowledge/familiarity with additive manufacturing processes & tools Proficiency in Siemens NX Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range for Experienced level: $95,200 - $128,800 Summary Pay Range for Senior level: $115,600 - $156,400 Applications for this position will be accepted until Jan. 05, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Test & Evaluation (BT&E) team is seeking a Mechanical Systems Design & Analysis Engineer to join our team in Saint Charles, MO. On the BT&E Test Operations & Engineering team, the design engineer has the primary responsibility for the synthesis of requirements, creation of engineering definition, 3D modeling, 2D drawing creation, and model-based definition development that defines the mechanical hardware required to install a flight test data system. This position has a focus on the design of flight test instrumentation hardware to meet the test requirements of Weapons program customers including Joint Direct Attack Munitions (JDAM), Small Diameter Bomb (SDB), Massive Ordinance Penetrator (MOP), and other derivative programs. The mechanical designers work the entire design cycle including support of requirement definition, layouts, coordination with electrical designers, preliminary design review, engineering release, coordination with manufacturing engineers and suppliers, occasional shipside support, and change incorporation. BT&E is currently hiring for a broad range of experience levels including Experienced and Senior level Mechanical System Design & Analysis Engineers. Position Responsibilities Include: Lead the development and documentation of mechanical and fluid system and thermal environment Lead the development, maintenance or modification of system designs/proposals to provide design documentation and high-level requirements to downstream users/customers Perform detailed design development and modification of mechanical and fluid system installations Lead team in performing spatial integration at system or component level and modification of mechanisms/ordinance systems Prepare technical documents for mechanical components and systems Prepare proposal and new business development efforts Work with test program management for work estimation and intake process Delegate tasks to design team and provide supervision to junior engineers Basic Qualifications (Required Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science 5+ years of experience in mechanical systems design Experience with and proficient in Microsoft Office Suite Preferred Qualifications (Desired Skills/Experience): Level 4: 9 or more years of related work experience or an equivalent combination of education and experience Bachelor degree or higher in Mechanical or Aerospace Engineering Active U.S. Security Clearance in the past 24 months Experience in test and evaluation Knowledge/familiarity with additive manufacturing processes & tools Proficiency in Siemens NX Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range for Experienced level: $95,200 - $128,800 Summary Pay Range for Senior level: $115,600 - $156,400 Applications for this position will be accepted until Jan. 05, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
12/20/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Test & Evaluation (BT&E) team is seeking a Mechanical Systems Design & Analysis Engineer to join our team in Saint Charles, MO. On the BT&E Test Operations & Engineering team, the design engineer has the primary responsibility for the synthesis of requirements, creation of engineering definition, 3D modeling, 2D drawing creation, and model-based definition development that defines the mechanical hardware required to install a flight test data system. This position has a focus on the design of flight test instrumentation hardware to meet the test requirements of Weapons program customers including Joint Direct Attack Munitions (JDAM), Small Diameter Bomb (SDB), Massive Ordinance Penetrator (MOP), and other derivative programs. The mechanical designers work the entire design cycle including support of requirement definition, layouts, coordination with electrical designers, preliminary design review, engineering release, coordination with manufacturing engineers and suppliers, occasional shipside support, and change incorporation. BT&E is currently hiring for a broad range of experience levels including Experienced and Senior level Mechanical System Design & Analysis Engineers. Position Responsibilities Include: Lead the development and documentation of mechanical and fluid system and thermal environment Lead the development, maintenance or modification of system designs/proposals to provide design documentation and high-level requirements to downstream users/customers Perform detailed design development and modification of mechanical and fluid system installations Lead team in performing spatial integration at system or component level and modification of mechanisms/ordinance systems Prepare technical documents for mechanical components and systems Prepare proposal and new business development efforts Work with test program management for work estimation and intake process Delegate tasks to design team and provide supervision to junior engineers Basic Qualifications (Required Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science 5+ years of experience in mechanical systems design Experience with and proficient in Microsoft Office Suite Preferred Qualifications (Desired Skills/Experience): Level 4: 9 or more years of related work experience or an equivalent combination of education and experience Bachelor degree or higher in Mechanical or Aerospace Engineering Active U.S. Security Clearance in the past 24 months Experience in test and evaluation Knowledge/familiarity with additive manufacturing processes & tools Proficiency in Siemens NX Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range for Experienced level: $95,200 - $128,800 Summary Pay Range for Senior level: $115,600 - $156,400 Applications for this position will be accepted until Jan. 05, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Defense, Space & Security (BDS) Phantom Works is seeking a Signature Management Engineering Lead to join our team in Berkeley, MO. Phantom Works is Boeing Defense's advanced design division that is responsible for designing, building, and testing the future capabilities for our Nation's defense. The Phantom Works' portfolio has grown significantly over the past few years, and we need to grow our team to solve some of the toughest challenges. This signature management engineering position will lead a multi-discipline team to implement and support software development to meet internal and external customer requirements for production and sustainment efforts. The ideal candidate should have a solid understanding of ways to estimate system signatures, knowledge of tier level assessments, defect characterization, and calculation of impacts of defects. Experience with current systems is a plus. Experience with condition-based maintenance and maintenance processes are beneficial. A background in software development is desired. Position Responsibilities: Lead a development team Develop and validate requirements Support the greater Survivability team Participate in Model Based System Engineering modeling of use-cases, behaviors, and software requirements Direct multi-discipline trades studies Work with suppliers and customers (internal & external) to ensure compliance with technical requirements Make final decisions on user-based requirements Candidates must be able to positively interact with a wide range of personnel across multiple disciplines Disseminate results and status to project stakeholders Candidate may be representing the Boeing Company to Government Customers and/or suppliers Candidate will document requirements and Statements of Work (SOWs) when needed Strong organization and documentation skills will be needed to manage multiple simultaneous projects in various states of maturity and/or multiple activities within a single project Basic Qualifications: Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement. 14+ years of related work experience and a bachelor's degree or an equivalent combination of related work experience and technical education Familiarity with one or more of the following is expected: Signature Rollup Processes, Signature Test Data Processing, Signature Data Visualization Relocation: This position offers relocation based on candidate eligibility. Note: Basic relocation will be offered for eligible internal candidates. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $154,700-$209,300 Applications for this position will be accepted until Dec. 31, 2025 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Contingent Upon Program Reward The position is contingent upon program award Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
12/20/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Defense, Space & Security (BDS) Phantom Works is seeking a Signature Management Engineering Lead to join our team in Berkeley, MO. Phantom Works is Boeing Defense's advanced design division that is responsible for designing, building, and testing the future capabilities for our Nation's defense. The Phantom Works' portfolio has grown significantly over the past few years, and we need to grow our team to solve some of the toughest challenges. This signature management engineering position will lead a multi-discipline team to implement and support software development to meet internal and external customer requirements for production and sustainment efforts. The ideal candidate should have a solid understanding of ways to estimate system signatures, knowledge of tier level assessments, defect characterization, and calculation of impacts of defects. Experience with current systems is a plus. Experience with condition-based maintenance and maintenance processes are beneficial. A background in software development is desired. Position Responsibilities: Lead a development team Develop and validate requirements Support the greater Survivability team Participate in Model Based System Engineering modeling of use-cases, behaviors, and software requirements Direct multi-discipline trades studies Work with suppliers and customers (internal & external) to ensure compliance with technical requirements Make final decisions on user-based requirements Candidates must be able to positively interact with a wide range of personnel across multiple disciplines Disseminate results and status to project stakeholders Candidate may be representing the Boeing Company to Government Customers and/or suppliers Candidate will document requirements and Statements of Work (SOWs) when needed Strong organization and documentation skills will be needed to manage multiple simultaneous projects in various states of maturity and/or multiple activities within a single project Basic Qualifications: Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement. 14+ years of related work experience and a bachelor's degree or an equivalent combination of related work experience and technical education Familiarity with one or more of the following is expected: Signature Rollup Processes, Signature Test Data Processing, Signature Data Visualization Relocation: This position offers relocation based on candidate eligibility. Note: Basic relocation will be offered for eligible internal candidates. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $154,700-$209,300 Applications for this position will be accepted until Dec. 31, 2025 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Contingent Upon Program Reward The position is contingent upon program award Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Company Overview Upchurch is a rapidly growing , full-service building engineering company providing mechanical, plumbing, HVAC, and electrical services across the southeastern United States. Founded in 1970 and headquartered in Horn Lake, MS, Upchurch has grown through both organic expansion and strategic acquisitions , establishing a strong reputation for quality, reliability, and service excellence. We offer end-to-end solutions-from design and installation to ongoing maintenance and emergency support- helping clients maximize building performance, energy efficiency, and equipment lifespan . Position Summary The BIM/Field Engineer bridges modeling and field execution . You'll translate coordinated models and shop drawings into accurate layout and installation in the field, resolve clashes/RFIs with project teams, and keep as-builts and documentation current so work stays safe, on schedule, and to spec . Key Responsibilities Model & Document Control: Update and manage coordinated models (Revit/Navisworks), shop drawings, submittals, and as-builts; maintain version control in BIM 360/Autodesk Construction Cloud. Field Layout: Generate points and run total station/robotic layout (Trimble/Leica) for sleeves, embeds, hangers, racks, and equipment; verify elevations, slopes, and tolerances. Clash Coordination: Lead/participate in coordination meetings; track issues, create RFIs, and drive timely resolutions with GC, design team, and trades. Installation Support: Produce spool sheets, installation details, and pull sheets; ensure material readiness, accurate takeoffs, and field-ready information. QA/QC & Commissioning Support: Perform in-field checks against plans/specs; assist with testing, start-up, and turnover packages; keep redlines current. VDC-to-Field Workflow: Convert model data into practical work packages and look-ahead plans; align with superintendent/foreman on daily priorities. Data Capture: Perform laser scans/point clouds (where applicable); reconcile scans to model for clash avoidance and progress verification. Reporting & Controls: Track quantities, earned vs. spent hours (basic productivity metrics), and update weekly progress photos/logs. Safety & Compliance: Follow site safety protocols (JHAs, PPE) and enforce model/field changes through approved processes. Qualifications Education/Experience: BS in Construction Management, Engineering (ME/EE/CE), Architecture, or equivalent and 2-5 years in BIM/VDC or field engineering (MEP or GC). Strong craft/field exposure may substitute for degree. Software: Proficiency in Revit and Navisworks ; working knowledge of BIM 360/ACC, Bluebeam, Procore/PlanGrid, AutoCAD; point layout tools (Trimble/Leica) preferred. Technical Skills: Read/interpret plans, sections, details, and specs; generate layout points; understand tolerances, slopes, and MEP system basics (supports, sleeves, penetrations). Coordination: RFI writing, issue tracking, and cross-trade communication; comfortable presenting in coordination meetings. Field Aptitude: Comfortable on active jobsites, verifying dimensions, and supporting crews; able to lift/handle equipment and work at heights as needed. Certifications (Nice-to-Have): OSHA 10/30, FAA Part 107 (drone), Laser scanning experience, PE/EIT or CMIT a plus. Soft Skills: Organized, detail-driven, proactive problem solver with solid written/verbal communication and a safety-first mindset. Benefits: Competitive salary based on experience. Health, dental, and vision insurance. Paid time off and holiday pay. Opportunities for professional development and certification assistance. Equal Employment Opportunity: Upchurch Companies provides equal employment opportunities to all employees and applicants. We prohibit discrimination and harassment of any type based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
12/20/2025
Full time
Company Overview Upchurch is a rapidly growing , full-service building engineering company providing mechanical, plumbing, HVAC, and electrical services across the southeastern United States. Founded in 1970 and headquartered in Horn Lake, MS, Upchurch has grown through both organic expansion and strategic acquisitions , establishing a strong reputation for quality, reliability, and service excellence. We offer end-to-end solutions-from design and installation to ongoing maintenance and emergency support- helping clients maximize building performance, energy efficiency, and equipment lifespan . Position Summary The BIM/Field Engineer bridges modeling and field execution . You'll translate coordinated models and shop drawings into accurate layout and installation in the field, resolve clashes/RFIs with project teams, and keep as-builts and documentation current so work stays safe, on schedule, and to spec . Key Responsibilities Model & Document Control: Update and manage coordinated models (Revit/Navisworks), shop drawings, submittals, and as-builts; maintain version control in BIM 360/Autodesk Construction Cloud. Field Layout: Generate points and run total station/robotic layout (Trimble/Leica) for sleeves, embeds, hangers, racks, and equipment; verify elevations, slopes, and tolerances. Clash Coordination: Lead/participate in coordination meetings; track issues, create RFIs, and drive timely resolutions with GC, design team, and trades. Installation Support: Produce spool sheets, installation details, and pull sheets; ensure material readiness, accurate takeoffs, and field-ready information. QA/QC & Commissioning Support: Perform in-field checks against plans/specs; assist with testing, start-up, and turnover packages; keep redlines current. VDC-to-Field Workflow: Convert model data into practical work packages and look-ahead plans; align with superintendent/foreman on daily priorities. Data Capture: Perform laser scans/point clouds (where applicable); reconcile scans to model for clash avoidance and progress verification. Reporting & Controls: Track quantities, earned vs. spent hours (basic productivity metrics), and update weekly progress photos/logs. Safety & Compliance: Follow site safety protocols (JHAs, PPE) and enforce model/field changes through approved processes. Qualifications Education/Experience: BS in Construction Management, Engineering (ME/EE/CE), Architecture, or equivalent and 2-5 years in BIM/VDC or field engineering (MEP or GC). Strong craft/field exposure may substitute for degree. Software: Proficiency in Revit and Navisworks ; working knowledge of BIM 360/ACC, Bluebeam, Procore/PlanGrid, AutoCAD; point layout tools (Trimble/Leica) preferred. Technical Skills: Read/interpret plans, sections, details, and specs; generate layout points; understand tolerances, slopes, and MEP system basics (supports, sleeves, penetrations). Coordination: RFI writing, issue tracking, and cross-trade communication; comfortable presenting in coordination meetings. Field Aptitude: Comfortable on active jobsites, verifying dimensions, and supporting crews; able to lift/handle equipment and work at heights as needed. Certifications (Nice-to-Have): OSHA 10/30, FAA Part 107 (drone), Laser scanning experience, PE/EIT or CMIT a plus. Soft Skills: Organized, detail-driven, proactive problem solver with solid written/verbal communication and a safety-first mindset. Benefits: Competitive salary based on experience. Health, dental, and vision insurance. Paid time off and holiday pay. Opportunities for professional development and certification assistance. Equal Employment Opportunity: Upchurch Companies provides equal employment opportunities to all employees and applicants. We prohibit discrimination and harassment of any type based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Holland Pump Company
Feasterville Trevose, Pennsylvania
Mechanic Introduction Join the most experienced and dedicated pump team with a passion for helping our customers Finish Faster that has earned Holland Pump and its employees the reputation for providing the very best customer service and support in the industry. We require a talented diesel and pump mechanic who is looking to develop a long-term career with a stable company and wants to be challenged by array of technical challenges daily. You must have excellent communication and problem-solving skills to successfully interact with clients and internal teams. This role requires a high level of technical aptitude and experience. Job Responsibilities • Inspect and diagnose mechanical and electrical problems with rental equipment. • Repair and/or replace defective parts, components or systems. • troubleshoot and repair Perkins, John Deere, Mitsubishi, Duetz, Cummins, Yanmar, Kubota diesel engines • Test parts and systems to ensure proper performance. • Perform regular maintenance work, such as oil changes, lubrication, and filter replacements. • Adjust, align, and calibrate systems to ensure proper functioning. • Clean, lubricate, and perform other maintenance work. • Troubleshoot and repair engines and pumps. • Provide customer service and explain repair needs and processes. Job Requirements • Possess a valid driver's license and clean driving record • High school diploma or GED equivalent • Possess formal mechanic training from a trade school or other accredited institution • Proven experience troubleshooting and repairing a variety diesel engine • Ability to read and interpret technical manuals, schematics, and diagrams • Excellent problem-solving and critical thinking skills • Familiarity with all safety protocols and procedures • Ability to work independently and in a team environment • Ability to lift and carry heavy objects (70 LBS) • Good communication and interpersonal skills Benefits Include: Holland Pump offers a competitive salary and benefits package to include Medical/Dental Insurance, 401(k) with Match, Paid PTO/Holidays, Life Insurance, Short-Term/ Long-Term Disability Insurance and Uniforms. Our average employee has 10 years of service! Holland Pump is an Equal Opportunity Employer, Veteran's employer, and Drug Free Workplace Job Type: Full-time Compensation details: 32-35 Hourly Wage PI36048e51308a-1175
12/20/2025
Full time
Mechanic Introduction Join the most experienced and dedicated pump team with a passion for helping our customers Finish Faster that has earned Holland Pump and its employees the reputation for providing the very best customer service and support in the industry. We require a talented diesel and pump mechanic who is looking to develop a long-term career with a stable company and wants to be challenged by array of technical challenges daily. You must have excellent communication and problem-solving skills to successfully interact with clients and internal teams. This role requires a high level of technical aptitude and experience. Job Responsibilities • Inspect and diagnose mechanical and electrical problems with rental equipment. • Repair and/or replace defective parts, components or systems. • troubleshoot and repair Perkins, John Deere, Mitsubishi, Duetz, Cummins, Yanmar, Kubota diesel engines • Test parts and systems to ensure proper performance. • Perform regular maintenance work, such as oil changes, lubrication, and filter replacements. • Adjust, align, and calibrate systems to ensure proper functioning. • Clean, lubricate, and perform other maintenance work. • Troubleshoot and repair engines and pumps. • Provide customer service and explain repair needs and processes. Job Requirements • Possess a valid driver's license and clean driving record • High school diploma or GED equivalent • Possess formal mechanic training from a trade school or other accredited institution • Proven experience troubleshooting and repairing a variety diesel engine • Ability to read and interpret technical manuals, schematics, and diagrams • Excellent problem-solving and critical thinking skills • Familiarity with all safety protocols and procedures • Ability to work independently and in a team environment • Ability to lift and carry heavy objects (70 LBS) • Good communication and interpersonal skills Benefits Include: Holland Pump offers a competitive salary and benefits package to include Medical/Dental Insurance, 401(k) with Match, Paid PTO/Holidays, Life Insurance, Short-Term/ Long-Term Disability Insurance and Uniforms. Our average employee has 10 years of service! Holland Pump is an Equal Opportunity Employer, Veteran's employer, and Drug Free Workplace Job Type: Full-time Compensation details: 32-35 Hourly Wage PI36048e51308a-1175
Mechanical HVAC & Plumbing Engineer Pay: $73.69 Contract o Hire US Citizenship or Green Card Status Must be within 50 miles of a BV office EXCLUDING Virginia REQUIRED SKILLS: PE license required Minimum of 8 years related work experience. A HVAC and plumbing engineer interested in working on a diverse collection of building configurations. Under general supervision, capable of performing all aspects of conventional design engineering, analysis, and studies on new and existing structures. Key Responsibilities: The Mechanical Buildings Design Group provides HVAC and plumbing solutions for COMPANY'S Global projects. The Mechanical Engineer level 5 position is responsible for the engineering and design of the HVAC and plumbing systems in various types of facilities. The HVAC Team is engaged in the following: Design and Construction Activities o Project Delivery Methods - Traditional Design-Bid-Build and Alternative Conceptual-Bid- Build. o Facility Types Water Treatment, Power Generation buildings, and Substations. o Systems HVAC and Plumbing. o Type of Areas Waste water treatment buildings, Administrative, Warehouse, Maintenance, Workshop, Laboratory, Chemical Storage & Handling, Electrical Distribution Center, Low & Medium Voltage Switchgear, and Pump Areas. Studies o Energy Audit/Efficiency - Engineering studies, system performance reviews, and energy compliance calculations o Code Review/Application - Facility review for code compliance. o Sustainable Design/LEED - Application of sustainable strategies Self-Motivated, Problem Solving, Written Communications, Driven for Results, Quality Focused, Strong Listening Skills. Intermediate knowledge of engineering design principles and the following applicable design guides and standards related to HVAC, and plumbing system design. Including a basic knowledge of the following : International Codes Council (ICC) Suite of Codes ASHRAE Handbooks / Standards ASPE design handbooks SMACNA Standards NFPA standards Computer generated HVAC Heatloads, energy modeling and HVAC equipment sizing Technical Submittal reviewing process Bid reviewing process Microsoft Office Suite Bluebeam Revu Revit 3D Modeling. Experience with large-scale water-cooled chillers is preferred. Education: Requires a bachelor's degree in engineering from either a recognized accredited program in their home country or the country in which the professional is practicing. All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, an
12/20/2025
Mechanical HVAC & Plumbing Engineer Pay: $73.69 Contract o Hire US Citizenship or Green Card Status Must be within 50 miles of a BV office EXCLUDING Virginia REQUIRED SKILLS: PE license required Minimum of 8 years related work experience. A HVAC and plumbing engineer interested in working on a diverse collection of building configurations. Under general supervision, capable of performing all aspects of conventional design engineering, analysis, and studies on new and existing structures. Key Responsibilities: The Mechanical Buildings Design Group provides HVAC and plumbing solutions for COMPANY'S Global projects. The Mechanical Engineer level 5 position is responsible for the engineering and design of the HVAC and plumbing systems in various types of facilities. The HVAC Team is engaged in the following: Design and Construction Activities o Project Delivery Methods - Traditional Design-Bid-Build and Alternative Conceptual-Bid- Build. o Facility Types Water Treatment, Power Generation buildings, and Substations. o Systems HVAC and Plumbing. o Type of Areas Waste water treatment buildings, Administrative, Warehouse, Maintenance, Workshop, Laboratory, Chemical Storage & Handling, Electrical Distribution Center, Low & Medium Voltage Switchgear, and Pump Areas. Studies o Energy Audit/Efficiency - Engineering studies, system performance reviews, and energy compliance calculations o Code Review/Application - Facility review for code compliance. o Sustainable Design/LEED - Application of sustainable strategies Self-Motivated, Problem Solving, Written Communications, Driven for Results, Quality Focused, Strong Listening Skills. Intermediate knowledge of engineering design principles and the following applicable design guides and standards related to HVAC, and plumbing system design. Including a basic knowledge of the following : International Codes Council (ICC) Suite of Codes ASHRAE Handbooks / Standards ASPE design handbooks SMACNA Standards NFPA standards Computer generated HVAC Heatloads, energy modeling and HVAC equipment sizing Technical Submittal reviewing process Bid reviewing process Microsoft Office Suite Bluebeam Revu Revit 3D Modeling. Experience with large-scale water-cooled chillers is preferred. Education: Requires a bachelor's degree in engineering from either a recognized accredited program in their home country or the country in which the professional is practicing. All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, an
Amentum Space Exploration Division
Huntsville, Alabama
Grow With Us Your growth matters to usthats why we offer a variety of ways for you to develop your career. With professional and leadership development opportunities like Team Lead Academy, education reimbursement, mentoring, and company sponsored networking events, you can take control of your own career path on your own terms with a company that believes in you. A Place Where You Belong At the Amentum Space Exploration Division, people are at the heart of our business. We reflect a diversity of cultures, backgrounds, and experiences. We expect our people, clients, and partners to treat one another with dignity and respect. This means promoting inclusion, celebrating diversity, and appreciating the differences we all bring to our workplace. Support Your Well-Being Our comprehensive benefits package includes wellness programs, 11 paid holidays, parental leave, paid time off, employee perks and much more. With these benefits, plus the option for flexible schedules and possible remote a few days a week (depending on customer requirements) well support you as you pursue a balanced, fulfilling lifeat work and at home. Position Description: The Valves, Actuators, and Ducts division of the Propulsion Engineering department is searching for a Mechanical Technician to support the Component Development Area (CDA). The CDA is a world-class, small fabrication shop and testing laboratory supporting development and testing of space flight components and systems. The selected candidate must have practical experience and demonstrate knowledge in a wide range of technical and engineering methods that support tests at the CDA. Candidate will fabricate tubing, fixtures, pneumatic panels, hydraulic assemblies, and various mechanical systems; candidate will operate and maintain complex mechanical systems utilized in testing of space flight components. Additional responsibilities may include, but are not limited to: Work directly with engineering personnel and/or senior technicians on the design, fabrication, installation, and operation of components and systems Usage and safe operation of mills, tube flaring equipment, saws, shear presses, grinders, and pneumatics Welding using various methodologies to assemble frames, test fixtures, and support assemblies for component testing Utilize detailed test procedures for safe operation of hydraulic, pneumatic, cryogenic, and high-pressure gas systems Interpret drawings, plans, and specifications for buildup and testing of flight type hardware and test components Utilize various tools and methods to perform work and maintenance on a variety of mechanical, fluid, and electrical components Fabrication, operation, and maintenance of hydraulic, cryogenic, pneumatic, and high-pressure gas systems Operate forklift, overhead crane, and man-lift equipment in the performance of work assignments as required Wear and utilize appropriate Personal Protective Equipment (PPE) and clothing during performance of work duties, to include safety glasses/goggles, hard hats, gloves, masks, respirators, coveralls, harnesses, etc. Notify Supervisor and Management of any hazards or unsafe conditions in the workplace and advise on potential corrective actions General shop housekeeping including cleanup and organization of parts Qualifications: Typically, the educational requirement is a High School diploma or General Equivalency Diploma (GED) or equivalent and 2 years relevant previous experience that proves mechanical aptitude and ability to work effectively without direct supervision. Required: Ability to communicate effectively with design engineers, test engineers, and other technicians in problem resolution, work coordination, and operation of mechanical systems Ability to read and follow mechanical blueprints and schematics for pneumatic and hydraulic systems and follow work area rules and safety protocols Ability to follow written and verbal instructions including established procedures to safely assist in construction of systems to perform structural and fluid testing Proficient operational experience in standard and complex mechanical equipment and systems Perform training assignments including on-the-job training designed to develop professional working knowledge and abilities Ability to work in a team environment Safety-conscious mindset Excellent organizational and customer relationship skills Working knowledge of Microsoft Office applications (i.e., Word, Excel, Outlook, etc.) Star ID will be required to obtain access to MSFC. Proof of U.S. Citizenship is required. We are an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language. We are a background screening, drug-free workplace. ASED offers a partnership in which you can grow personally and professionally within a framework of strong leadership, competitive compensation, and rewarding career paths. Come join our team on the Engineering Services and Science Capability Augmentation (ESSCA) contract whose work is destined to have a long-range effect on future generations! For more information on why Huntsville is known as one of the smartest cities in the nation, check out these websites: To review career opportunities and to submit your resume for Jacobs Space Exploration Group in Huntsville, AL, visit /. Select Career Opportunities to reach JSEG jobs o Search & choose Job by title o Upload your resume to apply online o Sign-in / Register your profile / Set up Job Alerts
12/20/2025
Grow With Us Your growth matters to usthats why we offer a variety of ways for you to develop your career. With professional and leadership development opportunities like Team Lead Academy, education reimbursement, mentoring, and company sponsored networking events, you can take control of your own career path on your own terms with a company that believes in you. A Place Where You Belong At the Amentum Space Exploration Division, people are at the heart of our business. We reflect a diversity of cultures, backgrounds, and experiences. We expect our people, clients, and partners to treat one another with dignity and respect. This means promoting inclusion, celebrating diversity, and appreciating the differences we all bring to our workplace. Support Your Well-Being Our comprehensive benefits package includes wellness programs, 11 paid holidays, parental leave, paid time off, employee perks and much more. With these benefits, plus the option for flexible schedules and possible remote a few days a week (depending on customer requirements) well support you as you pursue a balanced, fulfilling lifeat work and at home. Position Description: The Valves, Actuators, and Ducts division of the Propulsion Engineering department is searching for a Mechanical Technician to support the Component Development Area (CDA). The CDA is a world-class, small fabrication shop and testing laboratory supporting development and testing of space flight components and systems. The selected candidate must have practical experience and demonstrate knowledge in a wide range of technical and engineering methods that support tests at the CDA. Candidate will fabricate tubing, fixtures, pneumatic panels, hydraulic assemblies, and various mechanical systems; candidate will operate and maintain complex mechanical systems utilized in testing of space flight components. Additional responsibilities may include, but are not limited to: Work directly with engineering personnel and/or senior technicians on the design, fabrication, installation, and operation of components and systems Usage and safe operation of mills, tube flaring equipment, saws, shear presses, grinders, and pneumatics Welding using various methodologies to assemble frames, test fixtures, and support assemblies for component testing Utilize detailed test procedures for safe operation of hydraulic, pneumatic, cryogenic, and high-pressure gas systems Interpret drawings, plans, and specifications for buildup and testing of flight type hardware and test components Utilize various tools and methods to perform work and maintenance on a variety of mechanical, fluid, and electrical components Fabrication, operation, and maintenance of hydraulic, cryogenic, pneumatic, and high-pressure gas systems Operate forklift, overhead crane, and man-lift equipment in the performance of work assignments as required Wear and utilize appropriate Personal Protective Equipment (PPE) and clothing during performance of work duties, to include safety glasses/goggles, hard hats, gloves, masks, respirators, coveralls, harnesses, etc. Notify Supervisor and Management of any hazards or unsafe conditions in the workplace and advise on potential corrective actions General shop housekeeping including cleanup and organization of parts Qualifications: Typically, the educational requirement is a High School diploma or General Equivalency Diploma (GED) or equivalent and 2 years relevant previous experience that proves mechanical aptitude and ability to work effectively without direct supervision. Required: Ability to communicate effectively with design engineers, test engineers, and other technicians in problem resolution, work coordination, and operation of mechanical systems Ability to read and follow mechanical blueprints and schematics for pneumatic and hydraulic systems and follow work area rules and safety protocols Ability to follow written and verbal instructions including established procedures to safely assist in construction of systems to perform structural and fluid testing Proficient operational experience in standard and complex mechanical equipment and systems Perform training assignments including on-the-job training designed to develop professional working knowledge and abilities Ability to work in a team environment Safety-conscious mindset Excellent organizational and customer relationship skills Working knowledge of Microsoft Office applications (i.e., Word, Excel, Outlook, etc.) Star ID will be required to obtain access to MSFC. Proof of U.S. Citizenship is required. We are an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language. We are a background screening, drug-free workplace. ASED offers a partnership in which you can grow personally and professionally within a framework of strong leadership, competitive compensation, and rewarding career paths. Come join our team on the Engineering Services and Science Capability Augmentation (ESSCA) contract whose work is destined to have a long-range effect on future generations! For more information on why Huntsville is known as one of the smartest cities in the nation, check out these websites: To review career opportunities and to submit your resume for Jacobs Space Exploration Group in Huntsville, AL, visit /. Select Career Opportunities to reach JSEG jobs o Search & choose Job by title o Upload your resume to apply online o Sign-in / Register your profile / Set up Job Alerts
Overview : At TDS Telecom, connecting people is at the heart of everything we do. We are forward thinkers who leverage cutting-edge fiber internet technology to strengthen communities. We are dedicated to excellence, which drives us to succeed together, creating a better world through meaningful connections. Ready to make an impact? Join Our Team as an Outside Plant Construction Technician III in Meridian, ID! Ready to roll up your sleeves and bring cutting-edge fiber technology to life? As our Outside Plant Construction Technician III, you'll be at the heart of building and maintaining our state-of-the-art PON/fiber network. From installing buried and aerial fiber facilities to mastering construction equipment like trenchers, backhoes, end loaders, and plows, you'll make a real impact every day. You'll also install, test, troubleshoot, and repair fiber facilities to keep our customers connected. If you love working with your hands, being outdoors, and making a difference in your community, this is the role for you! Please note : This position may be filled as an Outside Plant Construction Technician II (ID # 9 ) or III (ID # 0 ), based on the candidate's skills and qualifications. Separate job postings outline the minimum requirements for each role. Please review both postings and apply to any level for which you are qualified and interested. This position is eligible for a $1,000 sign-on bonus! (Payout terms apply) Schedule: This is a full-time, 40-hour-per-week role with a flexible schedule. Please note that the schedule may vary depending on the specific market. Why Join Us? As a member of our Construction and Service Enablement team at TDS, you'll play a critical role in building and maintaining cutting-edge fiber optic networks that connect communities nationwide. With over 50 years of experience, TDS is a leader in fiber internet innovation, delivering up to 10 Gigabit speeds to homes and businesses. Join our team and be part of a collaborative environment where your skills in construction, safety, and technology will directly impact the future of connectivity in urban, suburban, and rural areas. This position may be eligible for relocation assistance. For further information, please contact the Talent Acquisition team. Responsibilities : Team Leadership Assistance: At the direction of the Sr Outside Plant Construction Tech, assist with: Communicating job duties and responsibilities to internal construction crews. Focusing on crew efficiencies, ensuring assigned tasks are completed. Training, monitoring, and coaching team members to safely perform assigned tasks with related construction equipment. Performing quality control inspections of construction crew work. Ensuring safety protocols are enforced. Working with foreperson to ensure projects remain on schedule and within budget. General Construction Labor Operation of trenchers, backhoes, end loaders, plows, and other excavating equipment used to construct and maintain outside plant cable facilities. Operation of Horizontal Directional Drills. Locate cable and fiber and other utilities as required by construction activity. Performs landscape restoration after project completion. Construction Site Organization Engage municipalities, utility companies, suppliers, contractors, and property owners to coordinate project tasks and avoid disputes. Receive maps and staking sheets and ensure construction project is built. Review, update, and assist with the recording of GIS, maps, addresses, and as-builds. Ensure locates are performed on time and prior to team and equipment arriving at the worksite. Set pedestals, vaults, and handholes along with marking/labeling fiber optic and/or copper facilities. Coordinate with Sr Outside Plant Construction Tech to ensure availability of materials and equipment. Perform the placement of new aerial and buried fiber according to maps, staking sheets, and locate markings. Construction Equipment Maintenance Service, clean, maintain, and repair equipment. Check DOT logs and review condition of trucks and trailers on job site to ensure all vehicles meet DOT standards. Report any issues to Sr Outside Plant Construction Tech. Complete all related paperwork in a timely manner. Assist Field Services technicians, as needed. The functions listed above are intended to describe the general nature and level of work being performed by associates assigned to this job. They are not intended to be an exhaustive list of all responsibilities; other duties may be assigned. Qualifications : Required Qualifications 2+ years of construction equipment operation utilizing various underground and aerial construction equipment such as directional drills, trencher/plow/rocksaw, backhoe, or bucket trucks -OR- current military service, or prior military service with honorable discharge. Must follow the TDS attendance guidelines in order to meet TDS's business needs including but not limited to our obligations to our customers and to our customers' needs. Must have and maintain a valid driver's license and remain eligible for DOT requirements. Other Qualifications Must have the ability to obtain a Class A CDL. A current CDL is preferred at hire, but TDS will train and certify eligible associates through its in-house CDL certification program after hire. Physical requirements may vary based on company needs: Ability to climb poles, ladders, towers, and other structures as needed. Ability to kneel, dig, lift, and pull. Upon hire, must successfully pass all components of the Safety Training course curriculum. Upon hire, must successfully complete customer-specific requirements, which may include a background check administered by the customer. Prefer 3+ months' experience with utility location. Prefer 2+ years' experience in the construction of fiber optic cable outside plant networks -OR- 2+ years installation of any underground or overhead utilities will be considered. Understanding of telecommunication products and services. Horizontal directional drilling experience preferred. Proven organizational skills and ability to multi-task. May require occasional travel. Must be willing to work overtime as needed. May be required to work various/swing shifts as business needs dictate. Must be able to operate vehicles with manual transmissions. Do you meet the Required Qualifications but are unsure if your experience aligns with the Other Qualifications? We encourage you to apply! Research shows that many candidates hesitate to apply unless they meet 100% of the qualifications, even when they possess the skills and experience needed to succeed in the role. Experience and skills come in many forms, and they may not always match exactly what's listed on paper, but they can still lead to success. If you meet the Required Qualifications and believe you have the potential to thrive in this role, we encourage you to apply today! Physical Demands and Work Environment While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand; walk; and stoop, kneel, crouch or crawl. The employee must also be able to climb poles, ladders, towers or other structures. The employee is occasionally required to sit, reach with hands and arms, climb or balance, and taste or smell. The employee must regularly lift and/or move up to 50 pounds and occasionally lift and/or move more than 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. While performing the duties of this job, the employee is regularly exposed to outside weather conditions and may have to work in attics and crawl spaces, or high-risk areas such as high voltage electrical, trenches, and manholes. The employee is frequently exposed to moving mechanical parts and heavy equipment; high, precarious places; fumes or airborne particles; and vibration. The employee is occasionally exposed to wet and/or humid conditions, toxic or caustic chemicals, extreme cold, and extreme heat. The noise level in the work environment is at times loud. Benefits We believe in taking care of our team, which is why we offer comprehensive benefits to support your health, financial well-being, and overall happiness. Join us and experience a work environment where your well-being is a top priority! Associates scheduled to work 20 or more hours per week have access to: Medical Coverage Dental Coverage Vision Coverage Life Insurance 401(k) Plan Generous Vacation & Paid Sick Leave Seven Paid National Holidays & One Floating Holiday Paid Parental Leave (6 weeks after 12 months of employment) Adoption & Surrogacy Assistance Employee Assistance & Wellness Programs Associates working 30 or more hours per week additionally have access to: Short-Term & Long-Term Disability TDS Service Discounts Education Assistance Paid Volunteer Time . click apply for full job details
12/20/2025
Full time
Overview : At TDS Telecom, connecting people is at the heart of everything we do. We are forward thinkers who leverage cutting-edge fiber internet technology to strengthen communities. We are dedicated to excellence, which drives us to succeed together, creating a better world through meaningful connections. Ready to make an impact? Join Our Team as an Outside Plant Construction Technician III in Meridian, ID! Ready to roll up your sleeves and bring cutting-edge fiber technology to life? As our Outside Plant Construction Technician III, you'll be at the heart of building and maintaining our state-of-the-art PON/fiber network. From installing buried and aerial fiber facilities to mastering construction equipment like trenchers, backhoes, end loaders, and plows, you'll make a real impact every day. You'll also install, test, troubleshoot, and repair fiber facilities to keep our customers connected. If you love working with your hands, being outdoors, and making a difference in your community, this is the role for you! Please note : This position may be filled as an Outside Plant Construction Technician II (ID # 9 ) or III (ID # 0 ), based on the candidate's skills and qualifications. Separate job postings outline the minimum requirements for each role. Please review both postings and apply to any level for which you are qualified and interested. This position is eligible for a $1,000 sign-on bonus! (Payout terms apply) Schedule: This is a full-time, 40-hour-per-week role with a flexible schedule. Please note that the schedule may vary depending on the specific market. Why Join Us? As a member of our Construction and Service Enablement team at TDS, you'll play a critical role in building and maintaining cutting-edge fiber optic networks that connect communities nationwide. With over 50 years of experience, TDS is a leader in fiber internet innovation, delivering up to 10 Gigabit speeds to homes and businesses. Join our team and be part of a collaborative environment where your skills in construction, safety, and technology will directly impact the future of connectivity in urban, suburban, and rural areas. This position may be eligible for relocation assistance. For further information, please contact the Talent Acquisition team. Responsibilities : Team Leadership Assistance: At the direction of the Sr Outside Plant Construction Tech, assist with: Communicating job duties and responsibilities to internal construction crews. Focusing on crew efficiencies, ensuring assigned tasks are completed. Training, monitoring, and coaching team members to safely perform assigned tasks with related construction equipment. Performing quality control inspections of construction crew work. Ensuring safety protocols are enforced. Working with foreperson to ensure projects remain on schedule and within budget. General Construction Labor Operation of trenchers, backhoes, end loaders, plows, and other excavating equipment used to construct and maintain outside plant cable facilities. Operation of Horizontal Directional Drills. Locate cable and fiber and other utilities as required by construction activity. Performs landscape restoration after project completion. Construction Site Organization Engage municipalities, utility companies, suppliers, contractors, and property owners to coordinate project tasks and avoid disputes. Receive maps and staking sheets and ensure construction project is built. Review, update, and assist with the recording of GIS, maps, addresses, and as-builds. Ensure locates are performed on time and prior to team and equipment arriving at the worksite. Set pedestals, vaults, and handholes along with marking/labeling fiber optic and/or copper facilities. Coordinate with Sr Outside Plant Construction Tech to ensure availability of materials and equipment. Perform the placement of new aerial and buried fiber according to maps, staking sheets, and locate markings. Construction Equipment Maintenance Service, clean, maintain, and repair equipment. Check DOT logs and review condition of trucks and trailers on job site to ensure all vehicles meet DOT standards. Report any issues to Sr Outside Plant Construction Tech. Complete all related paperwork in a timely manner. Assist Field Services technicians, as needed. The functions listed above are intended to describe the general nature and level of work being performed by associates assigned to this job. They are not intended to be an exhaustive list of all responsibilities; other duties may be assigned. Qualifications : Required Qualifications 2+ years of construction equipment operation utilizing various underground and aerial construction equipment such as directional drills, trencher/plow/rocksaw, backhoe, or bucket trucks -OR- current military service, or prior military service with honorable discharge. Must follow the TDS attendance guidelines in order to meet TDS's business needs including but not limited to our obligations to our customers and to our customers' needs. Must have and maintain a valid driver's license and remain eligible for DOT requirements. Other Qualifications Must have the ability to obtain a Class A CDL. A current CDL is preferred at hire, but TDS will train and certify eligible associates through its in-house CDL certification program after hire. Physical requirements may vary based on company needs: Ability to climb poles, ladders, towers, and other structures as needed. Ability to kneel, dig, lift, and pull. Upon hire, must successfully pass all components of the Safety Training course curriculum. Upon hire, must successfully complete customer-specific requirements, which may include a background check administered by the customer. Prefer 3+ months' experience with utility location. Prefer 2+ years' experience in the construction of fiber optic cable outside plant networks -OR- 2+ years installation of any underground or overhead utilities will be considered. Understanding of telecommunication products and services. Horizontal directional drilling experience preferred. Proven organizational skills and ability to multi-task. May require occasional travel. Must be willing to work overtime as needed. May be required to work various/swing shifts as business needs dictate. Must be able to operate vehicles with manual transmissions. Do you meet the Required Qualifications but are unsure if your experience aligns with the Other Qualifications? We encourage you to apply! Research shows that many candidates hesitate to apply unless they meet 100% of the qualifications, even when they possess the skills and experience needed to succeed in the role. Experience and skills come in many forms, and they may not always match exactly what's listed on paper, but they can still lead to success. If you meet the Required Qualifications and believe you have the potential to thrive in this role, we encourage you to apply today! Physical Demands and Work Environment While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand; walk; and stoop, kneel, crouch or crawl. The employee must also be able to climb poles, ladders, towers or other structures. The employee is occasionally required to sit, reach with hands and arms, climb or balance, and taste or smell. The employee must regularly lift and/or move up to 50 pounds and occasionally lift and/or move more than 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. While performing the duties of this job, the employee is regularly exposed to outside weather conditions and may have to work in attics and crawl spaces, or high-risk areas such as high voltage electrical, trenches, and manholes. The employee is frequently exposed to moving mechanical parts and heavy equipment; high, precarious places; fumes or airborne particles; and vibration. The employee is occasionally exposed to wet and/or humid conditions, toxic or caustic chemicals, extreme cold, and extreme heat. The noise level in the work environment is at times loud. Benefits We believe in taking care of our team, which is why we offer comprehensive benefits to support your health, financial well-being, and overall happiness. Join us and experience a work environment where your well-being is a top priority! Associates scheduled to work 20 or more hours per week have access to: Medical Coverage Dental Coverage Vision Coverage Life Insurance 401(k) Plan Generous Vacation & Paid Sick Leave Seven Paid National Holidays & One Floating Holiday Paid Parental Leave (6 weeks after 12 months of employment) Adoption & Surrogacy Assistance Employee Assistance & Wellness Programs Associates working 30 or more hours per week additionally have access to: Short-Term & Long-Term Disability TDS Service Discounts Education Assistance Paid Volunteer Time . click apply for full job details
Industrial Maintenance Technician Locations: Indianapolis , IN Pay: $ 25 - 28 Schedule: Monday-Friday, 6am-5pm Employment Type: Temp to Hire We are Searching for an Industrial Maintenance Technician experienced with installs, troubleshooting, repairing, and maintaining production and facility equipment. In this role you will be responsible for carrying out these duties in line with the company safety standards ensuring the efficient operations of production machinery and facility systems. HOURS: Monday-Friday, 6am-5pm RESPONSIBILITIES: Perform mechanical skills: This includes mechanical, electrical, pneumatic, and hydraulic troubleshooting and repair of facility and powered equipment. You'll need to be proficient in diagnosing issues, performing repairs, and ensuring all systems are functioning correctly. Diagnose problems, replace or repair parts, test, and adjust: This involves identifying the root cause of equipment malfunctions, replacing or repairing faulty components, testing the equipment to ensure it operates correctly, and making necessary adjustments to optimize performance. Perform regular preventive maintenance on equipment and plant facilities: This includes scheduling and conducting routine inspections and maintenance tasks to prevent equipment failures and ensure the longevity and efficiency of machinery and facilities. Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties: You'll need to be skilled in using various tools and equipment, such as wrenches, screwdrivers, electric meters, and forklifts, to perform maintenance and repair tasks safely and effectively. Comply with safety regulations and maintain clean and orderly work areas: This involves adhering to all safety protocols to prevent accidents and injuries, as well as keeping the work environment clean and organized to ensure a safe and efficient workspace. REQUIREMENTS: High school diploma or equivalent. Completion of a craft apprenticeship, or equivalent education and production maintenance experience, required. 4+ years of industrial maintenance experience with working knowledge of hydraulics, pneumatics, mechanicals, frinders , conveyors, shredders, and industrial skills . Able to read blueprints and technical drawings and follow directions. Good communication skills written or oral form. If you are a motivated and detail-oriented purchasing professional looking for a great opportunity in a dynamic environment, we encourage you to apply! About Us At NCW, we do our best to provide the brightest talent to the best companies across the country. Founded in 2000 our company's purpose was to redefine the way people think about contract staffing. People come first in our business. Our services are refined with in-depth expertise in our industry verticals, construction, manufacturing, warehousing & distribution, and engineering. We care about finding solutions that benefit everyone involved: our clients, our candidates, and our workforce. NCW is an Equal Opportunity Employer. Diversity and inclusion are important components of our culture and hiring practices. NCW is an employer and business partner dedicated to elevating the quality of life of our employees, clients, and communities.
12/20/2025
Full time
Industrial Maintenance Technician Locations: Indianapolis , IN Pay: $ 25 - 28 Schedule: Monday-Friday, 6am-5pm Employment Type: Temp to Hire We are Searching for an Industrial Maintenance Technician experienced with installs, troubleshooting, repairing, and maintaining production and facility equipment. In this role you will be responsible for carrying out these duties in line with the company safety standards ensuring the efficient operations of production machinery and facility systems. HOURS: Monday-Friday, 6am-5pm RESPONSIBILITIES: Perform mechanical skills: This includes mechanical, electrical, pneumatic, and hydraulic troubleshooting and repair of facility and powered equipment. You'll need to be proficient in diagnosing issues, performing repairs, and ensuring all systems are functioning correctly. Diagnose problems, replace or repair parts, test, and adjust: This involves identifying the root cause of equipment malfunctions, replacing or repairing faulty components, testing the equipment to ensure it operates correctly, and making necessary adjustments to optimize performance. Perform regular preventive maintenance on equipment and plant facilities: This includes scheduling and conducting routine inspections and maintenance tasks to prevent equipment failures and ensure the longevity and efficiency of machinery and facilities. Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties: You'll need to be skilled in using various tools and equipment, such as wrenches, screwdrivers, electric meters, and forklifts, to perform maintenance and repair tasks safely and effectively. Comply with safety regulations and maintain clean and orderly work areas: This involves adhering to all safety protocols to prevent accidents and injuries, as well as keeping the work environment clean and organized to ensure a safe and efficient workspace. REQUIREMENTS: High school diploma or equivalent. Completion of a craft apprenticeship, or equivalent education and production maintenance experience, required. 4+ years of industrial maintenance experience with working knowledge of hydraulics, pneumatics, mechanicals, frinders , conveyors, shredders, and industrial skills . Able to read blueprints and technical drawings and follow directions. Good communication skills written or oral form. If you are a motivated and detail-oriented purchasing professional looking for a great opportunity in a dynamic environment, we encourage you to apply! About Us At NCW, we do our best to provide the brightest talent to the best companies across the country. Founded in 2000 our company's purpose was to redefine the way people think about contract staffing. People come first in our business. Our services are refined with in-depth expertise in our industry verticals, construction, manufacturing, warehousing & distribution, and engineering. We care about finding solutions that benefit everyone involved: our clients, our candidates, and our workforce. NCW is an Equal Opportunity Employer. Diversity and inclusion are important components of our culture and hiring practices. NCW is an employer and business partner dedicated to elevating the quality of life of our employees, clients, and communities.
Industrial Maintenance Technician Locations: Indianapolis , IN Pay: $ 25 - 28 Schedule: Monday-Friday, 6am-5pm Employment Type: Temp to Hire We are Searching for an Industrial Maintenance Technician experienced with installs, troubleshooting, repairing, and maintaining production and facility equipment. In this role you will be responsible for carrying out these duties in line with the company safety standards ensuring the efficient operations of production machinery and facility systems. HOURS: Monday-Friday, 6am-5pm RESPONSIBILITIES: Perform mechanical skills: This includes mechanical, electrical, pneumatic, and hydraulic troubleshooting and repair of facility and powered equipment. You'll need to be proficient in diagnosing issues, performing repairs, and ensuring all systems are functioning correctly. Diagnose problems, replace or repair parts, test, and adjust: This involves identifying the root cause of equipment malfunctions, replacing or repairing faulty components, testing the equipment to ensure it operates correctly, and making necessary adjustments to optimize performance. Perform regular preventive maintenance on equipment and plant facilities: This includes scheduling and conducting routine inspections and maintenance tasks to prevent equipment failures and ensure the longevity and efficiency of machinery and facilities. Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties: You'll need to be skilled in using various tools and equipment, such as wrenches, screwdrivers, electric meters, and forklifts, to perform maintenance and repair tasks safely and effectively. Comply with safety regulations and maintain clean and orderly work areas: This involves adhering to all safety protocols to prevent accidents and injuries, as well as keeping the work environment clean and organized to ensure a safe and efficient workspace. REQUIREMENTS: High school diploma or equivalent. Completion of a craft apprenticeship, or equivalent education and production maintenance experience, required. 4+ years of industrial maintenance experience with working knowledge of hydraulics, pneumatics, mechanicals, frinders , conveyors, shredders, and industrial skills . Able to read blueprints and technical drawings and follow directions. Good communication skills written or oral form. If you are a motivated and detail-oriented purchasing professional looking for a great opportunity in a dynamic environment, we encourage you to apply! About Us At NCW, we do our best to provide the brightest talent to the best companies across the country. Founded in 2000 our company's purpose was to redefine the way people think about contract staffing. People come first in our business. Our services are refined with in-depth expertise in our industry verticals, construction, manufacturing, warehousing & distribution, and engineering. We care about finding solutions that benefit everyone involved: our clients, our candidates, and our workforce. NCW is an Equal Opportunity Employer. Diversity and inclusion are important components of our culture and hiring practices. NCW is an employer and business partner dedicated to elevating the quality of life of our employees, clients, and communities.
12/20/2025
Full time
Industrial Maintenance Technician Locations: Indianapolis , IN Pay: $ 25 - 28 Schedule: Monday-Friday, 6am-5pm Employment Type: Temp to Hire We are Searching for an Industrial Maintenance Technician experienced with installs, troubleshooting, repairing, and maintaining production and facility equipment. In this role you will be responsible for carrying out these duties in line with the company safety standards ensuring the efficient operations of production machinery and facility systems. HOURS: Monday-Friday, 6am-5pm RESPONSIBILITIES: Perform mechanical skills: This includes mechanical, electrical, pneumatic, and hydraulic troubleshooting and repair of facility and powered equipment. You'll need to be proficient in diagnosing issues, performing repairs, and ensuring all systems are functioning correctly. Diagnose problems, replace or repair parts, test, and adjust: This involves identifying the root cause of equipment malfunctions, replacing or repairing faulty components, testing the equipment to ensure it operates correctly, and making necessary adjustments to optimize performance. Perform regular preventive maintenance on equipment and plant facilities: This includes scheduling and conducting routine inspections and maintenance tasks to prevent equipment failures and ensure the longevity and efficiency of machinery and facilities. Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties: You'll need to be skilled in using various tools and equipment, such as wrenches, screwdrivers, electric meters, and forklifts, to perform maintenance and repair tasks safely and effectively. Comply with safety regulations and maintain clean and orderly work areas: This involves adhering to all safety protocols to prevent accidents and injuries, as well as keeping the work environment clean and organized to ensure a safe and efficient workspace. REQUIREMENTS: High school diploma or equivalent. Completion of a craft apprenticeship, or equivalent education and production maintenance experience, required. 4+ years of industrial maintenance experience with working knowledge of hydraulics, pneumatics, mechanicals, frinders , conveyors, shredders, and industrial skills . Able to read blueprints and technical drawings and follow directions. Good communication skills written or oral form. If you are a motivated and detail-oriented purchasing professional looking for a great opportunity in a dynamic environment, we encourage you to apply! About Us At NCW, we do our best to provide the brightest talent to the best companies across the country. Founded in 2000 our company's purpose was to redefine the way people think about contract staffing. People come first in our business. Our services are refined with in-depth expertise in our industry verticals, construction, manufacturing, warehousing & distribution, and engineering. We care about finding solutions that benefit everyone involved: our clients, our candidates, and our workforce. NCW is an Equal Opportunity Employer. Diversity and inclusion are important components of our culture and hiring practices. NCW is an employer and business partner dedicated to elevating the quality of life of our employees, clients, and communities.
Greenlight Professional Services (GPS)
Marysville, Ohio
Qualifications: Must be a US citizen. This position requires driving, education must be verified. Successfully completed Electrical Apprenticeship Program or graduate of a certified technical school and achieved Journeyman status. 5 years related experience and/or training; or equivalent combination of education and experience. 5 to 7 years related experience in a MANUFACTURING FACILITY - no residential Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or associates of the organization. Trained on NFPA 70E, Aerial Lift / Boom lift Certified. Training in motor and motor controls, variable frequency drives, and PLC / BMS controls. Ability to read complex wiring diagrams, identify electrical components, and extensive knowledge in troubleshooting of control circuits. Must be well versed in the use of voltmeters, amp meters, ohm meters, meggers and amp-probes. Uses guidelines from the National Electrical Code, local codes, safety regulations and EMCOR standard practices. Wears PPE and ARC Flash equipment while performing live troubleshooting evolutions. Experience with industrial HVAC systems and switch gear. Responsibilities: Ability to read and understand system blueprints, specifications, and performance data to determine configuration and purpose of system components such as compressors, motors, pumps, fans, switches, controls, ducts, or pipes. Installs power supply wiring and conduit for newly installed machines and building equipment. Connects power supply wires to machines and building equipment, connects cables and wires between machines and equipment. Diagnoses malfunctioning apparatus such as transformers, motors, motor starters, MCC panels, MCC circuits, variable frequency drives and lighting fixtures and replaces damaged or broken wires, cables, and fuses. Dismantles malfunctioning systems and tests components. Replaces faulty electrical components of machine such as relays, switches, sensors, motors, and positions sensing devices. Plans layout of wiring and installs wiring, conduit, and electrical apparatus in buildings. Responsible for accurate and timely paperwork related to essential duties and responsibilities. Performs preventative maintenance tasking on electrical and mechanical equipment. Second shift 3:00 PM to 11:30 PM (30 minute lunch) Overtime required
12/20/2025
Qualifications: Must be a US citizen. This position requires driving, education must be verified. Successfully completed Electrical Apprenticeship Program or graduate of a certified technical school and achieved Journeyman status. 5 years related experience and/or training; or equivalent combination of education and experience. 5 to 7 years related experience in a MANUFACTURING FACILITY - no residential Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or associates of the organization. Trained on NFPA 70E, Aerial Lift / Boom lift Certified. Training in motor and motor controls, variable frequency drives, and PLC / BMS controls. Ability to read complex wiring diagrams, identify electrical components, and extensive knowledge in troubleshooting of control circuits. Must be well versed in the use of voltmeters, amp meters, ohm meters, meggers and amp-probes. Uses guidelines from the National Electrical Code, local codes, safety regulations and EMCOR standard practices. Wears PPE and ARC Flash equipment while performing live troubleshooting evolutions. Experience with industrial HVAC systems and switch gear. Responsibilities: Ability to read and understand system blueprints, specifications, and performance data to determine configuration and purpose of system components such as compressors, motors, pumps, fans, switches, controls, ducts, or pipes. Installs power supply wiring and conduit for newly installed machines and building equipment. Connects power supply wires to machines and building equipment, connects cables and wires between machines and equipment. Diagnoses malfunctioning apparatus such as transformers, motors, motor starters, MCC panels, MCC circuits, variable frequency drives and lighting fixtures and replaces damaged or broken wires, cables, and fuses. Dismantles malfunctioning systems and tests components. Replaces faulty electrical components of machine such as relays, switches, sensors, motors, and positions sensing devices. Plans layout of wiring and installs wiring, conduit, and electrical apparatus in buildings. Responsible for accurate and timely paperwork related to essential duties and responsibilities. Performs preventative maintenance tasking on electrical and mechanical equipment. Second shift 3:00 PM to 11:30 PM (30 minute lunch) Overtime required
Career Transitions, LLC
Blythewood, South Carolina
Engineering Technician Full-Time Columbia, SC A hands-on and detail-oriented Engineering Technician is needed to join their team a growing team. The Engineering Technician will support engineering and manufacturing teams in the design, testing, and implementation of new and existing products and processes. This role plays a key part in ensuring product quality, process efficiency, and technical excellence on the production floor. Engineering Technician Responsibilities: Product & Process Support Partner with engineers on the design, building, testing, and validation of automotive components, assemblies, and systems Lead prototype builds and conducts functional, performance, and durability testing Collect, analyze, and document test data; provide actionable insights for product and process optimization Play a key role in New Product Introduction (NPI), including PFMEA, control plans, process setup, and validation Manufacturing & Continuous Improvement Drive manufacturing process improvements using Lean Manufacturing, Kaizen, and 5S methodologies to boost efficiency, safety, and quality Rapidly troubleshoot equipment and process issues, perform root cause analysis (8D, 5-Why), and implement permanent corrective actions Collaborate with production, maintenance, and quality teams to minimize downtime and maximize throughput Support Six Sigma and continuous improvement projects Technical Documentation & Quality Assurance Create and maintain detailed work instructions, test reports, technical specifications, and engineering drawings Ensure compliance with IATF 16949, ISO 9001, and customer-specific quality requirements Manage Engineering Change Requests (ECRs) and Engineering Change Notices (ECNs) Equipment, Tooling & Test Lab Operate, calibrate, and maintain advanced laboratory and production test equipment (data acquisition systems, environmental chambers, dynamometers, etc.) Design and fabricate custom fixtures, gauges, and tooling using SolidWorks or AutoCAD Support automation and robotics integration initiatives Engineering Technician Qualifications & Requirements: Associates degree in Engineering Technology, Mechanical Engineering Technology, Electrical Engineering Technology, or related field (preferred) High school diploma/GED combined with 25+ years of hands-on technical experience will be considered 25 years as an Engineering Technician, Lab Technician, or Manufacturing Technician in automotive or Tier 1/2 supplier environment strongly preferred Proficient reading blueprints, GD&T, schematics, and mechanical/electrical drawings Hands-on experience with oscilloscopes, multimeters, data loggers, CMM, and other precision measurement tools SolidWorks, AutoCAD, or similar 3D CAD experience required Strong knowledge of Lean Manufacturing, 5S, Root Cause Analysis, and Continuous Improvement tools Excellent problem-solving, troubleshooting, and communication skills Ability to thrive in a fast-paced, team-oriented manufacturing environment Send resume to Mary Jane Evans Career Transitions: Find Your Dream Job or Hire the Best Talent Career Transitions, a Morale Group Company, is a leading recruiting agency that specializes in helping employers find their next criti
12/20/2025
Engineering Technician Full-Time Columbia, SC A hands-on and detail-oriented Engineering Technician is needed to join their team a growing team. The Engineering Technician will support engineering and manufacturing teams in the design, testing, and implementation of new and existing products and processes. This role plays a key part in ensuring product quality, process efficiency, and technical excellence on the production floor. Engineering Technician Responsibilities: Product & Process Support Partner with engineers on the design, building, testing, and validation of automotive components, assemblies, and systems Lead prototype builds and conducts functional, performance, and durability testing Collect, analyze, and document test data; provide actionable insights for product and process optimization Play a key role in New Product Introduction (NPI), including PFMEA, control plans, process setup, and validation Manufacturing & Continuous Improvement Drive manufacturing process improvements using Lean Manufacturing, Kaizen, and 5S methodologies to boost efficiency, safety, and quality Rapidly troubleshoot equipment and process issues, perform root cause analysis (8D, 5-Why), and implement permanent corrective actions Collaborate with production, maintenance, and quality teams to minimize downtime and maximize throughput Support Six Sigma and continuous improvement projects Technical Documentation & Quality Assurance Create and maintain detailed work instructions, test reports, technical specifications, and engineering drawings Ensure compliance with IATF 16949, ISO 9001, and customer-specific quality requirements Manage Engineering Change Requests (ECRs) and Engineering Change Notices (ECNs) Equipment, Tooling & Test Lab Operate, calibrate, and maintain advanced laboratory and production test equipment (data acquisition systems, environmental chambers, dynamometers, etc.) Design and fabricate custom fixtures, gauges, and tooling using SolidWorks or AutoCAD Support automation and robotics integration initiatives Engineering Technician Qualifications & Requirements: Associates degree in Engineering Technology, Mechanical Engineering Technology, Electrical Engineering Technology, or related field (preferred) High school diploma/GED combined with 25+ years of hands-on technical experience will be considered 25 years as an Engineering Technician, Lab Technician, or Manufacturing Technician in automotive or Tier 1/2 supplier environment strongly preferred Proficient reading blueprints, GD&T, schematics, and mechanical/electrical drawings Hands-on experience with oscilloscopes, multimeters, data loggers, CMM, and other precision measurement tools SolidWorks, AutoCAD, or similar 3D CAD experience required Strong knowledge of Lean Manufacturing, 5S, Root Cause Analysis, and Continuous Improvement tools Excellent problem-solving, troubleshooting, and communication skills Ability to thrive in a fast-paced, team-oriented manufacturing environment Send resume to Mary Jane Evans Career Transitions: Find Your Dream Job or Hire the Best Talent Career Transitions, a Morale Group Company, is a leading recruiting agency that specializes in helping employers find their next criti
PRODUCTION ENGINEERING MAINTENANCE TECHNICIAN II - 3 RD SHIFT VISA SPONSORSHIP: NO ABOUT US: Our US client is a full-service, tier one supplier to automotive, specializing in the design and production of lighting equipment, accessories, and electronic components. Their Ohio facility houses lighting and mold design, construction, production engineering, and dedicated associates in our Quality, Assembly, Sales, and Customer Service departments. HOW YOU WILL OUTSHINE : Demonstrating solid organization skills Being attentive to every detail Exercising critical thinking Solving problems Working well independently and with a team WHAT YOU WILL BE DOING: Supporting manufacturing by participating in PDCA countermeasure activity, working on task board items, ensuring maintenance area cleanliness meets expectations, and completing all assigned PMs. Identifying and repairing problems and implementing countermeasures based on requests from senior technicians and management and documenting in the work order tracking system. Assisting senior technicians & engineers with their team projects and participating in daily maintenance/repair duties to ensure machine reliability. HOW YOU WILL BE REWARDED: Medical, Dental, Vision and Life Insurance 401K Retirement Savings with Company Match Tuition Reimbursement and more! HOW YOU WILL QUALIFY: 2 Years OJT in maintenance or engineering fields (minimum) 2 Year or 4 Year degree in a technical field (in lieu of OJT experience) Basic or entry level Industrial Maintenance knowledge. Knowledge of AC/DC electronic power controls and safety circuits and integrated circuit schematic and tracing. Demonstrated Knowledge of Electrical, Mechanical, Robotics. Pneumatics, PLC and Robot Systems. Ability to identify and repair technical problems relating to equipment operation using visual, mechanical & electrical tools (Drills. Minor Fabrication, Multimeters, Power Supplies, Robot teach pendants. etc.) Ability to interact with line associates to understand problems and communicate the required resources needed to complete the task at hand. Hand/robotic soldering experience. Lean Manufacturing Training.
12/20/2025
PRODUCTION ENGINEERING MAINTENANCE TECHNICIAN II - 3 RD SHIFT VISA SPONSORSHIP: NO ABOUT US: Our US client is a full-service, tier one supplier to automotive, specializing in the design and production of lighting equipment, accessories, and electronic components. Their Ohio facility houses lighting and mold design, construction, production engineering, and dedicated associates in our Quality, Assembly, Sales, and Customer Service departments. HOW YOU WILL OUTSHINE : Demonstrating solid organization skills Being attentive to every detail Exercising critical thinking Solving problems Working well independently and with a team WHAT YOU WILL BE DOING: Supporting manufacturing by participating in PDCA countermeasure activity, working on task board items, ensuring maintenance area cleanliness meets expectations, and completing all assigned PMs. Identifying and repairing problems and implementing countermeasures based on requests from senior technicians and management and documenting in the work order tracking system. Assisting senior technicians & engineers with their team projects and participating in daily maintenance/repair duties to ensure machine reliability. HOW YOU WILL BE REWARDED: Medical, Dental, Vision and Life Insurance 401K Retirement Savings with Company Match Tuition Reimbursement and more! HOW YOU WILL QUALIFY: 2 Years OJT in maintenance or engineering fields (minimum) 2 Year or 4 Year degree in a technical field (in lieu of OJT experience) Basic or entry level Industrial Maintenance knowledge. Knowledge of AC/DC electronic power controls and safety circuits and integrated circuit schematic and tracing. Demonstrated Knowledge of Electrical, Mechanical, Robotics. Pneumatics, PLC and Robot Systems. Ability to identify and repair technical problems relating to equipment operation using visual, mechanical & electrical tools (Drills. Minor Fabrication, Multimeters, Power Supplies, Robot teach pendants. etc.) Ability to interact with line associates to understand problems and communicate the required resources needed to complete the task at hand. Hand/robotic soldering experience. Lean Manufacturing Training.
Aircraft Maintenance Technician V A&P in GAC Brunswick Unique Skills: Gulfstream experience required. Education and Experience Requirements High School Diploma or GED required. 8 years aviation maintenance experience (avionics, electrical, and/or mechanical) to include 4 years of relevant Gulfstream aircraft experience. A&P (FAA Airframe and Powerplant) license required. Valid Driver's License required. Position Purpose :Perform various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Demonstrate expertise in aircraft maintenance and perform troubleshooting and repair duties requiring a high degree of accuracy and skill. Job Description Principle Duties and Responsibilities:Essential Functions: Perform required. maintenance and necessary servicing of all aircraft mechanical systems . Repair, maintain, install, and troubleshoot mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems . Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements . Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner . Ensure that all work accomplished meets quality standards and specifications . Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely . Follow standard operating procedures and JSAs when operating ground support equipment . Operate and oversee use of special support equipment used in removal and installations of major components . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean . Properly use and maintain company-provided tools and equipment . Act on behalf of Lead, as needed . Coordinate movement of aircraft, as required. . Maintain advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 228898 Category: Service Center Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 12/28/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information ( Site Utilities ( Contacts ( Sitemap ( Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company ( Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft
12/20/2025
Full time
Aircraft Maintenance Technician V A&P in GAC Brunswick Unique Skills: Gulfstream experience required. Education and Experience Requirements High School Diploma or GED required. 8 years aviation maintenance experience (avionics, electrical, and/or mechanical) to include 4 years of relevant Gulfstream aircraft experience. A&P (FAA Airframe and Powerplant) license required. Valid Driver's License required. Position Purpose :Perform various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Demonstrate expertise in aircraft maintenance and perform troubleshooting and repair duties requiring a high degree of accuracy and skill. Job Description Principle Duties and Responsibilities:Essential Functions: Perform required. maintenance and necessary servicing of all aircraft mechanical systems . Repair, maintain, install, and troubleshoot mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems . Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements . Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner . Ensure that all work accomplished meets quality standards and specifications . Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely . Follow standard operating procedures and JSAs when operating ground support equipment . Operate and oversee use of special support equipment used in removal and installations of major components . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean . Properly use and maintain company-provided tools and equipment . Act on behalf of Lead, as needed . Coordinate movement of aircraft, as required. . Maintain advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 228898 Category: Service Center Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 12/28/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information ( Site Utilities ( Contacts ( Sitemap ( Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company ( Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft
Lutheran Social Services of WI & Upper MI
Milwaukee, Wisconsin
Building Maintenance Technician Racine, WI / Lake Geneva, WI Full-Time 7 AM - 5 PM, Monday through Thursday Rotating On-Call $24-$26/hour Comprehensive Benefits Immediate Opening Are you ready to use your hands-on skills to make a real difference in people's lives? Lutheran Social Services of Wisconsin & Upper Michigan (LSS) is seeking a dedicated Building Maintenance Technician to join our Housing team. This role supports our HUD apartment buildings, office locations, and program sites throughout the southeast Wisconsin serving buildings in Racine and Lake Geneva. Key Responsibilities: Perform general maintenance and repairs: plumbing, electrical, carpentry, HVAC, and more Conduct preventative maintenance on boilers, water heaters, and mechanical systems Maintain property appearance, landscaping, and snow removal Respond to emergency maintenance calls (rotating on-call schedule) Ensure compliance with HUD, WHEDA, REAC, and local codes Monitor vendor work and maintain accurate documentation Assist with unit turnovers, equipment setup, and facility inspections Qualifications: High school diploma or GED preferred 2+ years of experience in building and grounds maintenance Knowledge of building systems, tools, and safety procedures Ability to read blueprints and perform heavy manual labor Valid driver's license and reliable transportation (MVR check required) Benefits: Public Service Loan Forgiveness (PSLF) eligibility Medical, Dental, and Vision Insurance Flexible Spending Accounts (Health & Dependent Care) Mileage reimbursement Paid Time Off + 10 Paid Holidays 403(b) Retirement Plan with contribution option Annual raises prioritized Calm Wellness App - Premium Access Early Earned Wage Access via UKG Wallet Employee Assistance Program Service Awards & Recognition ️ Work Environment: Indoor/outdoor settings with exposure to weather and household allergens Occasional lifting/moving up to 100 lbs Travel to multiple LSS sites as needed Lutheran Social Services is proud to be an Equal Opportunity Employer (EOE). If you're a motivated maintenance professional who values service and community, we'd love to hear from you. Apply now and help us build stronger communities-one repair at a time.
12/19/2025
Full time
Building Maintenance Technician Racine, WI / Lake Geneva, WI Full-Time 7 AM - 5 PM, Monday through Thursday Rotating On-Call $24-$26/hour Comprehensive Benefits Immediate Opening Are you ready to use your hands-on skills to make a real difference in people's lives? Lutheran Social Services of Wisconsin & Upper Michigan (LSS) is seeking a dedicated Building Maintenance Technician to join our Housing team. This role supports our HUD apartment buildings, office locations, and program sites throughout the southeast Wisconsin serving buildings in Racine and Lake Geneva. Key Responsibilities: Perform general maintenance and repairs: plumbing, electrical, carpentry, HVAC, and more Conduct preventative maintenance on boilers, water heaters, and mechanical systems Maintain property appearance, landscaping, and snow removal Respond to emergency maintenance calls (rotating on-call schedule) Ensure compliance with HUD, WHEDA, REAC, and local codes Monitor vendor work and maintain accurate documentation Assist with unit turnovers, equipment setup, and facility inspections Qualifications: High school diploma or GED preferred 2+ years of experience in building and grounds maintenance Knowledge of building systems, tools, and safety procedures Ability to read blueprints and perform heavy manual labor Valid driver's license and reliable transportation (MVR check required) Benefits: Public Service Loan Forgiveness (PSLF) eligibility Medical, Dental, and Vision Insurance Flexible Spending Accounts (Health & Dependent Care) Mileage reimbursement Paid Time Off + 10 Paid Holidays 403(b) Retirement Plan with contribution option Annual raises prioritized Calm Wellness App - Premium Access Early Earned Wage Access via UKG Wallet Employee Assistance Program Service Awards & Recognition ️ Work Environment: Indoor/outdoor settings with exposure to weather and household allergens Occasional lifting/moving up to 100 lbs Travel to multiple LSS sites as needed Lutheran Social Services is proud to be an Equal Opportunity Employer (EOE). If you're a motivated maintenance professional who values service and community, we'd love to hear from you. Apply now and help us build stronger communities-one repair at a time.
Lutheran Social Services of WI & Upper MI
Milwaukee, Wisconsin
Building Maintenance Technician Racine, WI / Lake Geneva, WI Full-Time 7 AM - 5 PM, Monday through Thursday Rotating On-Call $24-$26/hour Comprehensive Benefits Immediate Opening Are you ready to use your hands-on skills to make a real difference in people's lives? Lutheran Social Services of Wisconsin & Upper Michigan (LSS) is seeking a dedicated Building Maintenance Technician to join our Housing team. This role supports our HUD apartment buildings, office locations, and program sites throughout the southeast Wisconsin serving buildings in Racine and Lake Geneva. Key Responsibilities: Perform general maintenance and repairs: plumbing, electrical, carpentry, HVAC, and more Conduct preventative maintenance on boilers, water heaters, and mechanical systems Maintain property appearance, landscaping, and snow removal Respond to emergency maintenance calls (rotating on-call schedule) Ensure compliance with HUD, WHEDA, REAC, and local codes Monitor vendor work and maintain accurate documentation Assist with unit turnovers, equipment setup, and facility inspections Qualifications: High school diploma or GED preferred 2+ years of experience in building and grounds maintenance Knowledge of building systems, tools, and safety procedures Ability to read blueprints and perform heavy manual labor Valid driver's license and reliable transportation (MVR check required) Benefits: Public Service Loan Forgiveness (PSLF) eligibility Medical, Dental, and Vision Insurance Flexible Spending Accounts (Health & Dependent Care) Mileage reimbursement Paid Time Off + 10 Paid Holidays 403(b) Retirement Plan with contribution option Annual raises prioritized Calm Wellness App - Premium Access Early Earned Wage Access via UKG Wallet Employee Assistance Program Service Awards & Recognition ️ Work Environment: Indoor/outdoor settings with exposure to weather and household allergens Occasional lifting/moving up to 100 lbs Travel to multiple LSS sites as needed Lutheran Social Services is proud to be an Equal Opportunity Employer (EOE). If you're a motivated maintenance professional who values service and community, we'd love to hear from you. Apply now and help us build stronger communities-one repair at a time.
12/19/2025
Full time
Building Maintenance Technician Racine, WI / Lake Geneva, WI Full-Time 7 AM - 5 PM, Monday through Thursday Rotating On-Call $24-$26/hour Comprehensive Benefits Immediate Opening Are you ready to use your hands-on skills to make a real difference in people's lives? Lutheran Social Services of Wisconsin & Upper Michigan (LSS) is seeking a dedicated Building Maintenance Technician to join our Housing team. This role supports our HUD apartment buildings, office locations, and program sites throughout the southeast Wisconsin serving buildings in Racine and Lake Geneva. Key Responsibilities: Perform general maintenance and repairs: plumbing, electrical, carpentry, HVAC, and more Conduct preventative maintenance on boilers, water heaters, and mechanical systems Maintain property appearance, landscaping, and snow removal Respond to emergency maintenance calls (rotating on-call schedule) Ensure compliance with HUD, WHEDA, REAC, and local codes Monitor vendor work and maintain accurate documentation Assist with unit turnovers, equipment setup, and facility inspections Qualifications: High school diploma or GED preferred 2+ years of experience in building and grounds maintenance Knowledge of building systems, tools, and safety procedures Ability to read blueprints and perform heavy manual labor Valid driver's license and reliable transportation (MVR check required) Benefits: Public Service Loan Forgiveness (PSLF) eligibility Medical, Dental, and Vision Insurance Flexible Spending Accounts (Health & Dependent Care) Mileage reimbursement Paid Time Off + 10 Paid Holidays 403(b) Retirement Plan with contribution option Annual raises prioritized Calm Wellness App - Premium Access Early Earned Wage Access via UKG Wallet Employee Assistance Program Service Awards & Recognition ️ Work Environment: Indoor/outdoor settings with exposure to weather and household allergens Occasional lifting/moving up to 100 lbs Travel to multiple LSS sites as needed Lutheran Social Services is proud to be an Equal Opportunity Employer (EOE). If you're a motivated maintenance professional who values service and community, we'd love to hear from you. Apply now and help us build stronger communities-one repair at a time.
Lutheran Social Services of WI & Upper MI
Milwaukee, Wisconsin
Building Maintenance Technician Racine, WI / Lake Geneva, WI Full-Time 7 AM - 5 PM, Monday through Thursday Rotating On-Call $24-$26/hour Comprehensive Benefits Immediate Opening Are you ready to use your hands-on skills to make a real difference in people's lives? Lutheran Social Services of Wisconsin & Upper Michigan (LSS) is seeking a dedicated Building Maintenance Technician to join our Housing team. This role supports our HUD apartment buildings, office locations, and program sites throughout the southeast Wisconsin serving buildings in Racine and Lake Geneva. Key Responsibilities: Perform general maintenance and repairs: plumbing, electrical, carpentry, HVAC, and more Conduct preventative maintenance on boilers, water heaters, and mechanical systems Maintain property appearance, landscaping, and snow removal Respond to emergency maintenance calls (rotating on-call schedule) Ensure compliance with HUD, WHEDA, REAC, and local codes Monitor vendor work and maintain accurate documentation Assist with unit turnovers, equipment setup, and facility inspections Qualifications: High school diploma or GED preferred 2+ years of experience in building and grounds maintenance Knowledge of building systems, tools, and safety procedures Ability to read blueprints and perform heavy manual labor Valid driver's license and reliable transportation (MVR check required) Benefits: Public Service Loan Forgiveness (PSLF) eligibility Medical, Dental, and Vision Insurance Flexible Spending Accounts (Health & Dependent Care) Mileage reimbursement Paid Time Off + 10 Paid Holidays 403(b) Retirement Plan with contribution option Annual raises prioritized Calm Wellness App - Premium Access Early Earned Wage Access via UKG Wallet Employee Assistance Program Service Awards & Recognition ️ Work Environment: Indoor/outdoor settings with exposure to weather and household allergens Occasional lifting/moving up to 100 lbs Travel to multiple LSS sites as needed Lutheran Social Services is proud to be an Equal Opportunity Employer (EOE). If you're a motivated maintenance professional who values service and community, we'd love to hear from you. Apply now and help us build stronger communities-one repair at a time.
12/19/2025
Full time
Building Maintenance Technician Racine, WI / Lake Geneva, WI Full-Time 7 AM - 5 PM, Monday through Thursday Rotating On-Call $24-$26/hour Comprehensive Benefits Immediate Opening Are you ready to use your hands-on skills to make a real difference in people's lives? Lutheran Social Services of Wisconsin & Upper Michigan (LSS) is seeking a dedicated Building Maintenance Technician to join our Housing team. This role supports our HUD apartment buildings, office locations, and program sites throughout the southeast Wisconsin serving buildings in Racine and Lake Geneva. Key Responsibilities: Perform general maintenance and repairs: plumbing, electrical, carpentry, HVAC, and more Conduct preventative maintenance on boilers, water heaters, and mechanical systems Maintain property appearance, landscaping, and snow removal Respond to emergency maintenance calls (rotating on-call schedule) Ensure compliance with HUD, WHEDA, REAC, and local codes Monitor vendor work and maintain accurate documentation Assist with unit turnovers, equipment setup, and facility inspections Qualifications: High school diploma or GED preferred 2+ years of experience in building and grounds maintenance Knowledge of building systems, tools, and safety procedures Ability to read blueprints and perform heavy manual labor Valid driver's license and reliable transportation (MVR check required) Benefits: Public Service Loan Forgiveness (PSLF) eligibility Medical, Dental, and Vision Insurance Flexible Spending Accounts (Health & Dependent Care) Mileage reimbursement Paid Time Off + 10 Paid Holidays 403(b) Retirement Plan with contribution option Annual raises prioritized Calm Wellness App - Premium Access Early Earned Wage Access via UKG Wallet Employee Assistance Program Service Awards & Recognition ️ Work Environment: Indoor/outdoor settings with exposure to weather and household allergens Occasional lifting/moving up to 100 lbs Travel to multiple LSS sites as needed Lutheran Social Services is proud to be an Equal Opportunity Employer (EOE). If you're a motivated maintenance professional who values service and community, we'd love to hear from you. Apply now and help us build stronger communities-one repair at a time.
Lutheran Social Services of WI & Upper MI
Milwaukee, Wisconsin
Building Maintenance Technician Racine, WI / Lake Geneva, WI Full-Time 7 AM - 5 PM, Monday through Thursday Rotating On-Call $24-$26/hour Comprehensive Benefits Immediate Opening Are you ready to use your hands-on skills to make a real difference in people's lives? Lutheran Social Services of Wisconsin & Upper Michigan (LSS) is seeking a dedicated Building Maintenance Technician to join our Housing team. This role supports our HUD apartment buildings, office locations, and program sites throughout the southeast Wisconsin serving buildings in Racine and Lake Geneva. Key Responsibilities: Perform general maintenance and repairs: plumbing, electrical, carpentry, HVAC, and more Conduct preventative maintenance on boilers, water heaters, and mechanical systems Maintain property appearance, landscaping, and snow removal Respond to emergency maintenance calls (rotating on-call schedule) Ensure compliance with HUD, WHEDA, REAC, and local codes Monitor vendor work and maintain accurate documentation Assist with unit turnovers, equipment setup, and facility inspections Qualifications: High school diploma or GED preferred 2+ years of experience in building and grounds maintenance Knowledge of building systems, tools, and safety procedures Ability to read blueprints and perform heavy manual labor Valid driver's license and reliable transportation (MVR check required) Benefits: Public Service Loan Forgiveness (PSLF) eligibility Medical, Dental, and Vision Insurance Flexible Spending Accounts (Health & Dependent Care) Mileage reimbursement Paid Time Off + 10 Paid Holidays 403(b) Retirement Plan with contribution option Annual raises prioritized Calm Wellness App - Premium Access Early Earned Wage Access via UKG Wallet Employee Assistance Program Service Awards & Recognition ️ Work Environment: Indoor/outdoor settings with exposure to weather and household allergens Occasional lifting/moving up to 100 lbs Travel to multiple LSS sites as needed Lutheran Social Services is proud to be an Equal Opportunity Employer (EOE). If you're a motivated maintenance professional who values service and community, we'd love to hear from you. Apply now and help us build stronger communities-one repair at a time.
12/19/2025
Full time
Building Maintenance Technician Racine, WI / Lake Geneva, WI Full-Time 7 AM - 5 PM, Monday through Thursday Rotating On-Call $24-$26/hour Comprehensive Benefits Immediate Opening Are you ready to use your hands-on skills to make a real difference in people's lives? Lutheran Social Services of Wisconsin & Upper Michigan (LSS) is seeking a dedicated Building Maintenance Technician to join our Housing team. This role supports our HUD apartment buildings, office locations, and program sites throughout the southeast Wisconsin serving buildings in Racine and Lake Geneva. Key Responsibilities: Perform general maintenance and repairs: plumbing, electrical, carpentry, HVAC, and more Conduct preventative maintenance on boilers, water heaters, and mechanical systems Maintain property appearance, landscaping, and snow removal Respond to emergency maintenance calls (rotating on-call schedule) Ensure compliance with HUD, WHEDA, REAC, and local codes Monitor vendor work and maintain accurate documentation Assist with unit turnovers, equipment setup, and facility inspections Qualifications: High school diploma or GED preferred 2+ years of experience in building and grounds maintenance Knowledge of building systems, tools, and safety procedures Ability to read blueprints and perform heavy manual labor Valid driver's license and reliable transportation (MVR check required) Benefits: Public Service Loan Forgiveness (PSLF) eligibility Medical, Dental, and Vision Insurance Flexible Spending Accounts (Health & Dependent Care) Mileage reimbursement Paid Time Off + 10 Paid Holidays 403(b) Retirement Plan with contribution option Annual raises prioritized Calm Wellness App - Premium Access Early Earned Wage Access via UKG Wallet Employee Assistance Program Service Awards & Recognition ️ Work Environment: Indoor/outdoor settings with exposure to weather and household allergens Occasional lifting/moving up to 100 lbs Travel to multiple LSS sites as needed Lutheran Social Services is proud to be an Equal Opportunity Employer (EOE). If you're a motivated maintenance professional who values service and community, we'd love to hear from you. Apply now and help us build stronger communities-one repair at a time.
