Housing Authority of Kansas City
Waldron, Missouri
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
09/06/2025
Full time
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
Join Our Facilities Maintenance Team at Pomeroy Living! Pomeroy Living operates state-of-the-art senior living communities Northville, Rochester Hills, Lake Orion and Sterling Heights, MI. We are seeking a skilled and experienced full-time Maintenance Technician to float in-between our multiple communities to assist with day-to-day building maintenance and room turns. Responsibilities: Perform preventative and corrective maintenance on building systems, including plumbing, electrical, HVAC, and mechanical equipment. Conduct repairs and general maintenance on building structures, grounds, and resident apartments. Assist with resident room turnovers, including painting, drywall repair, and minor renovations. Move and assist in the transportation of furniture and equipment. Maintain a safe and well-maintained community environment. Qualifications: Working knowledge of building systems and related code requirements. Experience with a variety of hand and power tools. Ability to lift up to 50 pounds. Excellent problem-solving and troubleshooting skills. Strong work ethic and a commitment to providing excellent service. Benefits: Paid Time Off - start accruing day one of orientation Paid Holidays Access up to 50% of your earned pay DAILY! Flexible scheduling Company-paid Life insurance for FT staff Priority Health Medical, Delta Dental, and Vision Insurance 401(k) retirement plan Career advancement opportunities Join our team and put your maintenance skills to use in creating a welcoming and comfortable living environment for our residents. Compensation details: 20-20 PI5d0fa2098b00-0885
09/06/2025
Full time
Join Our Facilities Maintenance Team at Pomeroy Living! Pomeroy Living operates state-of-the-art senior living communities Northville, Rochester Hills, Lake Orion and Sterling Heights, MI. We are seeking a skilled and experienced full-time Maintenance Technician to float in-between our multiple communities to assist with day-to-day building maintenance and room turns. Responsibilities: Perform preventative and corrective maintenance on building systems, including plumbing, electrical, HVAC, and mechanical equipment. Conduct repairs and general maintenance on building structures, grounds, and resident apartments. Assist with resident room turnovers, including painting, drywall repair, and minor renovations. Move and assist in the transportation of furniture and equipment. Maintain a safe and well-maintained community environment. Qualifications: Working knowledge of building systems and related code requirements. Experience with a variety of hand and power tools. Ability to lift up to 50 pounds. Excellent problem-solving and troubleshooting skills. Strong work ethic and a commitment to providing excellent service. Benefits: Paid Time Off - start accruing day one of orientation Paid Holidays Access up to 50% of your earned pay DAILY! Flexible scheduling Company-paid Life insurance for FT staff Priority Health Medical, Delta Dental, and Vision Insurance 401(k) retirement plan Career advancement opportunities Join our team and put your maintenance skills to use in creating a welcoming and comfortable living environment for our residents. Compensation details: 20-20 PI5d0fa2098b00-0885
Housing Authority of Kansas City
Liberty, Missouri
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
09/06/2025
Full time
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
Housing Authority of Kansas City
Lees Summit, Missouri
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
09/06/2025
Full time
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
Superior Dairy is looking to expand our team with an experienced Maintenance Repair Technician in our Canton, OH facility. As a Maintenance Technician you will be responsible for the care and maintenance of all property and milk production assets, ensuring they remain in safe, sanitary, and efficient condition. We are especially seeking technicians with strong electrical troubleshooting skills to support our automated production systems and ensure uptime of critical electrical infrastructure. Quality milk and dairy products start on the farm and continue at Superior Dairy. At MMPA, our dairy farm families work with pride and care every day to produce wholesome, nutritious dairy products. Our commitment to quality continues onto the next step, as our member milk is bottled or processed into dairy products. MMPA bottles our milk in Canton, Ohio at MMPAs wholly owned subsidiary, Superior Dairy. Originally established in 1922, Superior Dairy is loyal to their Great Lakes roots while distributing their products to 44 states. Why youll love working here: Competitive salary Health and wellness benefits with medical coverage through Blue Cross Blue Shield, including mental health benefits Disability insurance Paid time off Retirement including 401k with employer contributions Personal and professional growth opportunities Employee appreciation events and recognition awards Employee wellness initiatives Employees feedback and suggestion forums Key Responsibilities - but not be limited to: Ensure operation of machinery and mechanical equipment by completing maintenance requirements (both planned and unplanned) on production, packaging, processing equipment, and utility systems Troubleshoot and repair industrial electrical systems, including motors, control panels, sensors, PLCs, and wiring Read, analyze and interpret technical procedures, electrical schematics, service manuals and work orders to perform required maintenance and service Use a variety of hand and power tools, electric meters and material handling equipment in performing duties Perform a variety of manual tasks in varying temperatures for extended periods of time, which may include lifting light to heavy materials, climbing, standing, squatting, bending, and working at heights when applicable Abide by standard work procedures and job safety standards Additional duties and/or projects may be assigned Minimum Qualifications: HS Diploma/GED Must be at least 18 years of age Must be legally authorized to work in the US without company sponsorship now or in the future Must be able to successfully complete all post-offer, pre-employment contingencies Ability to work any and/or rotating shifts, weekends, holidays, or overtime if applicable Preferred Qualifications: Three or more years of multi-craft maintenance experience in a manufacturing environment Experience troubleshooting 480VAC, 240VAC, 120VAC, and 24VDC systems Experience troubleshooting Hydraulic and pneumatic systems Experience adhering to industry-specific safety standards Apply Today, if youre ready to join our team, We look forward to hearing from you! We are a drug-free facility , and maintaining a safe, healthy, and productive work environment is a top priority. As part of our commitment to your well-being, all applicants will undergo a drug screening as part of the hiring process. Superior Dairy is an equal-opportunity employer and values diversity in our workforce. This job description is not designed to contain a comprehensive list of responsibilities that are required of the role. Responsibilities may change at any time with or without notice. Superior Dairy provides the opportunity for meaningful work that makes a difference in the dairy industry and in our communities. The diverse talents and perspectives of our employees help us to meet the needs of our member farms and the customers we serve. Please Note: We are not accepting unsolicited resumes or inquiries from third-party recruiters at this time. Thank you for your understanding. PI8e63dc1ac1-
09/06/2025
Full time
Superior Dairy is looking to expand our team with an experienced Maintenance Repair Technician in our Canton, OH facility. As a Maintenance Technician you will be responsible for the care and maintenance of all property and milk production assets, ensuring they remain in safe, sanitary, and efficient condition. We are especially seeking technicians with strong electrical troubleshooting skills to support our automated production systems and ensure uptime of critical electrical infrastructure. Quality milk and dairy products start on the farm and continue at Superior Dairy. At MMPA, our dairy farm families work with pride and care every day to produce wholesome, nutritious dairy products. Our commitment to quality continues onto the next step, as our member milk is bottled or processed into dairy products. MMPA bottles our milk in Canton, Ohio at MMPAs wholly owned subsidiary, Superior Dairy. Originally established in 1922, Superior Dairy is loyal to their Great Lakes roots while distributing their products to 44 states. Why youll love working here: Competitive salary Health and wellness benefits with medical coverage through Blue Cross Blue Shield, including mental health benefits Disability insurance Paid time off Retirement including 401k with employer contributions Personal and professional growth opportunities Employee appreciation events and recognition awards Employee wellness initiatives Employees feedback and suggestion forums Key Responsibilities - but not be limited to: Ensure operation of machinery and mechanical equipment by completing maintenance requirements (both planned and unplanned) on production, packaging, processing equipment, and utility systems Troubleshoot and repair industrial electrical systems, including motors, control panels, sensors, PLCs, and wiring Read, analyze and interpret technical procedures, electrical schematics, service manuals and work orders to perform required maintenance and service Use a variety of hand and power tools, electric meters and material handling equipment in performing duties Perform a variety of manual tasks in varying temperatures for extended periods of time, which may include lifting light to heavy materials, climbing, standing, squatting, bending, and working at heights when applicable Abide by standard work procedures and job safety standards Additional duties and/or projects may be assigned Minimum Qualifications: HS Diploma/GED Must be at least 18 years of age Must be legally authorized to work in the US without company sponsorship now or in the future Must be able to successfully complete all post-offer, pre-employment contingencies Ability to work any and/or rotating shifts, weekends, holidays, or overtime if applicable Preferred Qualifications: Three or more years of multi-craft maintenance experience in a manufacturing environment Experience troubleshooting 480VAC, 240VAC, 120VAC, and 24VDC systems Experience troubleshooting Hydraulic and pneumatic systems Experience adhering to industry-specific safety standards Apply Today, if youre ready to join our team, We look forward to hearing from you! We are a drug-free facility , and maintaining a safe, healthy, and productive work environment is a top priority. As part of our commitment to your well-being, all applicants will undergo a drug screening as part of the hiring process. Superior Dairy is an equal-opportunity employer and values diversity in our workforce. This job description is not designed to contain a comprehensive list of responsibilities that are required of the role. Responsibilities may change at any time with or without notice. Superior Dairy provides the opportunity for meaningful work that makes a difference in the dairy industry and in our communities. The diverse talents and perspectives of our employees help us to meet the needs of our member farms and the customers we serve. Please Note: We are not accepting unsolicited resumes or inquiries from third-party recruiters at this time. Thank you for your understanding. PI8e63dc1ac1-
Housing Authority of Kansas City
Independence, Missouri
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
09/06/2025
Full time
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
Housing Authority of Kansas City
Liberty, Missouri
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
09/06/2025
Full time
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
Housing Authority of Kansas City
Independence, Missouri
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
09/06/2025
Full time
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
Housing Authority of Kansas City
Kansas City, Missouri
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
09/06/2025
Full time
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
Housing Authority of Kansas City
Kansas City, Missouri
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
09/06/2025
Full time
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
Description: Position Summary This position is responsible for the most efficient, highest quality customer experiences to Wind River Environmental' s drain customers. You will complete all drain cleaning, jetting and cable work related to commercial and residential service calls. Essential Duties and Responsibilities Provide effective communication between customers and Wind River Environmental. Provide camera service for mainline stoppage. Educate and assist customers on the importance of drain repair and replacement. Explain reasons for blockage and illustrate how you will resolve the issue. Work alongside customer service and dispatch to ensure overall success of the business. Protect drain cleaning and camera equipment and keep a well inventoried truck. Participate actively in all training exercises, team meetings, and safety discussions. Completion and submission of quote and service paperwork to management. Respond to trouble/emergency calls in a timely manner. Follow all Wind River Environmental service protocols. Must be able to work overtime including weekends and holidays if needed Must be able to work on-call rotations as needed Must comply with all FMCSA and DOT regulations if applicable Must practice safe work methods to remain accident and injury free.?Must have the ability to recognize hazards inherent in routine and non-routine tasks and make adjustments to avoid loss, injury or accident.? Required to wear Personal Protective Equipment (PPE) appropriate to your job. Other duties as assigned by management Work Environment You are regularly exposed outside weather conditions, non-hazardous fumes and noise Must be comfortable working independently Interaction with customers Knowledge, Skills, and Abilities Ability to read and interpret documents including Company policies and procedures, safety rules, operating and maintenance instructions, maps and road signs. Ability to speak, cooperate and communicate effectively with customers, co-workers and management. Ability to work independently and manage pressure to meet deadlines. Basic computer literacy including email and internet skills. Ability to perform basic math functions. Requirements: Required Qualifications Must have a valid driver's license with an acceptable driving record At least 21 years of age At least 2 years of professional commercial driving experience (post-school) Ability to successfully pass DOT drug screen, medical certification, physical exam and road exams Must be able to operate in a drug-free workplace Must have a valid driver's license with an acceptable driving record High-School Diploma Company Offered Benefits Competitive starting hourly rates + opportunity to earn overtime! Ask about our Step Program Opportunity to earn a quarterly safety bonus! Company Paid Smith Systems Defensive Training Company Paid Med-Card Renewals Room for Growth! Medical, dental and vision insurance Employer paid life insurance Employee discount for services offered in your area! Matching 401K 6 paid holidays, 2 paid floating holidays and generous paid time off plan Company Paid Uniforms Annual Safety Boot Stipend Wind River Environmental services and maintains a broad array of non-hazardous liquid waste systems, including grease traps, septic tanks and related waste systems. Headquartered in Marlborough, MA we offer a full suite of services to business, residential and municipal customers throughout the East Coast. Wind River Environmental is an Equal Opportunity Employer. Wind River Environment LLC is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers. Wind River Environmental participates in E-Verify. Additional information is available in English (PDF) and Spanish (PDF). Compensation details: 24-26 Hourly Wage PIdbd5-0723
09/06/2025
Full time
Description: Position Summary This position is responsible for the most efficient, highest quality customer experiences to Wind River Environmental' s drain customers. You will complete all drain cleaning, jetting and cable work related to commercial and residential service calls. Essential Duties and Responsibilities Provide effective communication between customers and Wind River Environmental. Provide camera service for mainline stoppage. Educate and assist customers on the importance of drain repair and replacement. Explain reasons for blockage and illustrate how you will resolve the issue. Work alongside customer service and dispatch to ensure overall success of the business. Protect drain cleaning and camera equipment and keep a well inventoried truck. Participate actively in all training exercises, team meetings, and safety discussions. Completion and submission of quote and service paperwork to management. Respond to trouble/emergency calls in a timely manner. Follow all Wind River Environmental service protocols. Must be able to work overtime including weekends and holidays if needed Must be able to work on-call rotations as needed Must comply with all FMCSA and DOT regulations if applicable Must practice safe work methods to remain accident and injury free.?Must have the ability to recognize hazards inherent in routine and non-routine tasks and make adjustments to avoid loss, injury or accident.? Required to wear Personal Protective Equipment (PPE) appropriate to your job. Other duties as assigned by management Work Environment You are regularly exposed outside weather conditions, non-hazardous fumes and noise Must be comfortable working independently Interaction with customers Knowledge, Skills, and Abilities Ability to read and interpret documents including Company policies and procedures, safety rules, operating and maintenance instructions, maps and road signs. Ability to speak, cooperate and communicate effectively with customers, co-workers and management. Ability to work independently and manage pressure to meet deadlines. Basic computer literacy including email and internet skills. Ability to perform basic math functions. Requirements: Required Qualifications Must have a valid driver's license with an acceptable driving record At least 21 years of age At least 2 years of professional commercial driving experience (post-school) Ability to successfully pass DOT drug screen, medical certification, physical exam and road exams Must be able to operate in a drug-free workplace Must have a valid driver's license with an acceptable driving record High-School Diploma Company Offered Benefits Competitive starting hourly rates + opportunity to earn overtime! Ask about our Step Program Opportunity to earn a quarterly safety bonus! Company Paid Smith Systems Defensive Training Company Paid Med-Card Renewals Room for Growth! Medical, dental and vision insurance Employer paid life insurance Employee discount for services offered in your area! Matching 401K 6 paid holidays, 2 paid floating holidays and generous paid time off plan Company Paid Uniforms Annual Safety Boot Stipend Wind River Environmental services and maintains a broad array of non-hazardous liquid waste systems, including grease traps, septic tanks and related waste systems. Headquartered in Marlborough, MA we offer a full suite of services to business, residential and municipal customers throughout the East Coast. Wind River Environmental is an Equal Opportunity Employer. Wind River Environment LLC is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers. Wind River Environmental participates in E-Verify. Additional information is available in English (PDF) and Spanish (PDF). Compensation details: 24-26 Hourly Wage PIdbd5-0723
Housing Authority of Kansas City
Lees Summit, Missouri
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
09/06/2025
Full time
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
Housing Authority of Kansas City
Waldron, Missouri
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
09/06/2025
Full time
Description: The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at ) EXAMPLES OF ESSENTIAL FUNCTIONS Essential Duties and Responsibilities The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned. 1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades. 2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol. 3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation. 4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile. 5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs. 6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards. 7. Makes repairs and adjustments to various appliances and equipment ( e.g ., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary. 8. Performs general interior and exterior repairs including structural components ( e.g ., stairways, floor joists, and rafters), roof repairs ( e.g ., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair ( e.g ., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys. 9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles. 10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts. 11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers' specifications. EDUCATION AND EXPERIENCE High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years' experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred. OTHER REQUIREMENT 1. Must possess a valid driver's license. 2. Must be able to lift 50-75 lbs. Requirements: Compensation details: 20.42-20.42 Hourly Wage PIab501aee1-
Automotive Service Technician Location: Fairfax, VA, 22030 Job Description: We are seeking a skilled Automotive Service Technician to join our team in Fairfax, VA. The ideal candidate will have a strong background in automotive repair and maintenance, with a focus on Ford vehicles. Responsibilities include diagnosing and repairing mechanical issues, performing routine maintenance tasks, and ensuring all work is completed to manufacturer standards. The successful candidate will have excellent problem-solving skills, attention to detail, and a commitment to providing top-notch customer service. Key Responsibilities: Diagnose and repair mechanical issues on Ford vehicles Perform routine maintenance tasks, such as oil changes and tire rotations Ensure all work is completed to manufacturer standards Communicate effectively with customers regarding vehicle issues and recommended repairs Maintain a clean and organized work environment Qualifications: High school diploma or equivalent Completion of an automotive technology program or equivalent work experience Ford certification preferred Strong mechanical aptitude and problem-solving skills Excellent attention to detail Ability to work independently and as part of a team PIf8dcefb788e5-0000
09/05/2025
Full time
Automotive Service Technician Location: Fairfax, VA, 22030 Job Description: We are seeking a skilled Automotive Service Technician to join our team in Fairfax, VA. The ideal candidate will have a strong background in automotive repair and maintenance, with a focus on Ford vehicles. Responsibilities include diagnosing and repairing mechanical issues, performing routine maintenance tasks, and ensuring all work is completed to manufacturer standards. The successful candidate will have excellent problem-solving skills, attention to detail, and a commitment to providing top-notch customer service. Key Responsibilities: Diagnose and repair mechanical issues on Ford vehicles Perform routine maintenance tasks, such as oil changes and tire rotations Ensure all work is completed to manufacturer standards Communicate effectively with customers regarding vehicle issues and recommended repairs Maintain a clean and organized work environment Qualifications: High school diploma or equivalent Completion of an automotive technology program or equivalent work experience Ford certification preferred Strong mechanical aptitude and problem-solving skills Excellent attention to detail Ability to work independently and as part of a team PIf8dcefb788e5-0000
Hiring Salary: $44,000 $3,000 Service Bonus The Facilities Maintenance Technician is responsible for general repairs and maintenance of all HRT facilities. Performs both skilled and unskilled work on HRT facility assets. Essential Job Functions: (Duties listed are not intended to be all inclusive nor to limit duties that might reasonably be assigned) With minor supervision, this position will work independently or as part of a crew/team to perform the following tasks: Performs skilled and unskilled tasks with little or no assistance or supervision. Performs troubleshooting and repairs on all facilities electrical, HVAC, plumbing, and mechanical systems. Performs tasks and maintains assets in compliance with safety practices and procedures, and relevant Federal, State, and Local regulatory requirements and codes. Works with a variety of machines and equipment, such as hand and power tools, drill presses, and saws, in conducting maintenance and repair tasks. Ensures the equipment and tools are maintained and stored and in a clean, secure, and appropriate working condition. Ensures that buildings are maintained in a safe, clean, and orderly condition, and in accordance with health and fire regulations. Assists in setting up for various meetings and special events. Assists with inspection of properties, equipment, and chemical storage to ensure environmental compliance. Makes minor repairs to interior and exterior of buildings such as walls, floors, lights, roofs, garages, landscaping, sidewalks, fences, and pavement markings. Performs minor renovation tasks such as door installation, framing (metal and wood), drywall installation/finishing and painting. Installs/relocates/removes equipment, office furniture, and the like, as directed. Participates in appropriate formal and On-The-Job (OJT) training. Assists with storm preparations and clean-up, including snow removal, downed trees, trash, etc. Manage records created and received in compliance with the Hampton Roads Transit Records Management Policy and Procedures. Responsible for maintaining a general awareness of HRT's EMS. Responsible for handling all related job responsibilities in accordance with HRT's Environmental Policy, relevant EMS Standard Operating Procedures, and Emergency Management Plan. Required Knowledge, Abilities and Skills essential to Job Functions: General knowledge of electrical, HVAC, plumbing, carpentry, and/or painting. With minor supervision, this position will work independently to make repairs and perform routine preventative maintenance on facilities and equipment. Position uses logic and reasoning to prioritize and troubleshoot problems and identify solutions. Position adjusts actions to incorporate latest information as appropriate and communicates with other internal and external customers to convey information effectively. Position will work outside regular business hours as required and is expected to operate in accordance with HRT's Company policies, including but not limited to Safety and Environmental Policies. Required Software Knowledge and Skills essential to Job Functions: Proficiency in using computer systems and the listed software applications associated with performance of assigned work is essential. Basic problem-solving skills associated with software applications used is expected. Software usage relevant to job duties will be evaluated. Software applications: Ability to use computers is required, including Microsoft Outlook, Excel, Word, HRT's Enterprise Asset Management (EAM) software for maintenance, and HRT's Enterprise Resource Planning (ERP) software for finance. Safety Responsibility: Perform all job duties and responsibilities in a safe manner to protect oneself, fellow employees, and the public from injury or harm. Promote safety awareness and follow safety procedures and policies. Take an active part in reporting unsafe conditions and any hazards within the workplace to their Supervisor, Manager and/or the Safety Department. Training and/or Education: High school diploma or GED certificate required with basic mechanical skills and an understanding of tools and their use. Certificate in trade school or equivalent work experience related to facilities maintenance recommended. Must demonstrate satisfactory communication skills (both verbal and written) and be able to perform basic math. Required Experience: Minimum 3 years of Facilities Maintenance Mechanic (or equivalent) related work. Licenses or Certificates: Possess a valid Driver's License. Acquire a Virginia Driver's License within 60 days after the date of hire (in instances when an out of state license is not the applicant's current state of residence). Plumbing, Electrical, HVAC, and/or Mechanical certification(s) preferred Special Requirements: This position is classified as essential personnel. FLSA Status: Non-Exempt Physical Demands: Must be able to lift and carry 50 lbs. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Requires frequent bending, kneeling, climbing (ladders), and walking. Must be able to drive and operate a vehicle.Unusual Demands: Individual will be on call. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work involves meeting multiple demands on a timely basis. Duties may require some seasonal overtime. INDSJ Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Phone: Email: Equal Opportunity Employer, including disabled and veterans.
09/05/2025
Full time
Hiring Salary: $44,000 $3,000 Service Bonus The Facilities Maintenance Technician is responsible for general repairs and maintenance of all HRT facilities. Performs both skilled and unskilled work on HRT facility assets. Essential Job Functions: (Duties listed are not intended to be all inclusive nor to limit duties that might reasonably be assigned) With minor supervision, this position will work independently or as part of a crew/team to perform the following tasks: Performs skilled and unskilled tasks with little or no assistance or supervision. Performs troubleshooting and repairs on all facilities electrical, HVAC, plumbing, and mechanical systems. Performs tasks and maintains assets in compliance with safety practices and procedures, and relevant Federal, State, and Local regulatory requirements and codes. Works with a variety of machines and equipment, such as hand and power tools, drill presses, and saws, in conducting maintenance and repair tasks. Ensures the equipment and tools are maintained and stored and in a clean, secure, and appropriate working condition. Ensures that buildings are maintained in a safe, clean, and orderly condition, and in accordance with health and fire regulations. Assists in setting up for various meetings and special events. Assists with inspection of properties, equipment, and chemical storage to ensure environmental compliance. Makes minor repairs to interior and exterior of buildings such as walls, floors, lights, roofs, garages, landscaping, sidewalks, fences, and pavement markings. Performs minor renovation tasks such as door installation, framing (metal and wood), drywall installation/finishing and painting. Installs/relocates/removes equipment, office furniture, and the like, as directed. Participates in appropriate formal and On-The-Job (OJT) training. Assists with storm preparations and clean-up, including snow removal, downed trees, trash, etc. Manage records created and received in compliance with the Hampton Roads Transit Records Management Policy and Procedures. Responsible for maintaining a general awareness of HRT's EMS. Responsible for handling all related job responsibilities in accordance with HRT's Environmental Policy, relevant EMS Standard Operating Procedures, and Emergency Management Plan. Required Knowledge, Abilities and Skills essential to Job Functions: General knowledge of electrical, HVAC, plumbing, carpentry, and/or painting. With minor supervision, this position will work independently to make repairs and perform routine preventative maintenance on facilities and equipment. Position uses logic and reasoning to prioritize and troubleshoot problems and identify solutions. Position adjusts actions to incorporate latest information as appropriate and communicates with other internal and external customers to convey information effectively. Position will work outside regular business hours as required and is expected to operate in accordance with HRT's Company policies, including but not limited to Safety and Environmental Policies. Required Software Knowledge and Skills essential to Job Functions: Proficiency in using computer systems and the listed software applications associated with performance of assigned work is essential. Basic problem-solving skills associated with software applications used is expected. Software usage relevant to job duties will be evaluated. Software applications: Ability to use computers is required, including Microsoft Outlook, Excel, Word, HRT's Enterprise Asset Management (EAM) software for maintenance, and HRT's Enterprise Resource Planning (ERP) software for finance. Safety Responsibility: Perform all job duties and responsibilities in a safe manner to protect oneself, fellow employees, and the public from injury or harm. Promote safety awareness and follow safety procedures and policies. Take an active part in reporting unsafe conditions and any hazards within the workplace to their Supervisor, Manager and/or the Safety Department. Training and/or Education: High school diploma or GED certificate required with basic mechanical skills and an understanding of tools and their use. Certificate in trade school or equivalent work experience related to facilities maintenance recommended. Must demonstrate satisfactory communication skills (both verbal and written) and be able to perform basic math. Required Experience: Minimum 3 years of Facilities Maintenance Mechanic (or equivalent) related work. Licenses or Certificates: Possess a valid Driver's License. Acquire a Virginia Driver's License within 60 days after the date of hire (in instances when an out of state license is not the applicant's current state of residence). Plumbing, Electrical, HVAC, and/or Mechanical certification(s) preferred Special Requirements: This position is classified as essential personnel. FLSA Status: Non-Exempt Physical Demands: Must be able to lift and carry 50 lbs. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Requires frequent bending, kneeling, climbing (ladders), and walking. Must be able to drive and operate a vehicle.Unusual Demands: Individual will be on call. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work involves meeting multiple demands on a timely basis. Duties may require some seasonal overtime. INDSJ Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Phone: Email: Equal Opportunity Employer, including disabled and veterans.
2551 Valmont Dr Brenham Texas Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce. Are you ready to move the world forward? Apply now. A Brief Summary of This Position: Under the direction of the Production Supervisor or Lead Person, the Stacker Crane Operator will be responsible for operating the stacker crane to support storeroom, shipping, and manufacturing. Responsible for checking stacker crane, rails, wheels, condition of cables and reporting any unsafe conditions to appropriate personnel. Transports product and raw materials from inventory locations to manufacturing work areas. Shift: 2nd (Evenings) Monday-Friday 1pm-9pm Starting Hourly Pay Rate: $19.65 + $1.00 for shift differential Opportunity for step pay increases at 90 days, 1 year & 2 years Essential Functions: Operate stacker crane to support storeroom, shipping and manufacturing Use tape measure and micrometer to measure dimensions of raw material Frequently operates straddle trucks and forklifts to move product to its proper location Be responsible for inventory accuracy while performing staging, loading/unloading, and delivery of product and materials from inventory location, manufacturing WIP order and shipping requirements. Perform cycle counts as required Use inventory picklists to remove product from inventory to manufacturing WIP orders and shipping orders Loads product and materials on trailers from inventory locations and stage loaded trailers in trailer staging area Transport bolsters materials to staging areas and to/from inventory locations Help perform preventive maintenance on equipment Reports any unsafe issues to the department lead person, supervisor or maintenance technician Maintain good housekeeping by keeping work area free of debris and trash Ensure all scrap tubes from the tube mill and small pole manufacturing departments are disposed of properly. Use stacker magnetic crane to unload materials from trailers and rail cars and receive into inventory Use proper transaction to move material in and out of inventory Maintain appropriate professional competencies, certifications, licenses, etc., necessary to perform job Other duties as assigned Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities): Read tape measure & micrometer Ability to read and write English Ability to read & write, perform basic math: add, subtract, decimals and fraction Become a certified forklift operator Become proficient in operating a straddle truck Complete overhead crane training program Highly Qualified Candidates Will Also Possess These Qualifications: 1 year prior experience operating a Stacker Overhead Crane High School Diploma or GED 1 year prior experience working in a manufacturing environment 1 year prior working experience operating heavy equipment The ability to accurately and honestly check one's own work for quality assurance Must be a person of passion and integrity who has the drive to excel and deliver exceptional results Working Environment and Physical Efforts: Incumbent will also be exposed to production facilities where specific PPE will be required such as hand, hearing, foot, eye, and head protection.There will also be exposure to outside elements for extended periods of time.Being outside will also expose them to material handling equipment such as forklifts, straddle trucks, and shag trucks. Physical effort is moderate to heavy. A high degree of physical effort is used due to continuous heavy lifting. Employee is lifting 35 to 50 lbs. approximately 80-90% of the time. Standing, bending, or walking is required 85% of the time. Loading ESS products can cause the employee to climb and lift in unusual positions. Securing platforms, containers and flatbeds means that the employee must be able to climb up to 8' off the ground. Pushing and pulling to place carts in close quarters takes extra physical effort. Although some items weigh more, a maximum lift of 50 lbs. is all that is required. Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short-term and long-term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law.Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email .
09/05/2025
Full time
2551 Valmont Dr Brenham Texas Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce. Are you ready to move the world forward? Apply now. A Brief Summary of This Position: Under the direction of the Production Supervisor or Lead Person, the Stacker Crane Operator will be responsible for operating the stacker crane to support storeroom, shipping, and manufacturing. Responsible for checking stacker crane, rails, wheels, condition of cables and reporting any unsafe conditions to appropriate personnel. Transports product and raw materials from inventory locations to manufacturing work areas. Shift: 2nd (Evenings) Monday-Friday 1pm-9pm Starting Hourly Pay Rate: $19.65 + $1.00 for shift differential Opportunity for step pay increases at 90 days, 1 year & 2 years Essential Functions: Operate stacker crane to support storeroom, shipping and manufacturing Use tape measure and micrometer to measure dimensions of raw material Frequently operates straddle trucks and forklifts to move product to its proper location Be responsible for inventory accuracy while performing staging, loading/unloading, and delivery of product and materials from inventory location, manufacturing WIP order and shipping requirements. Perform cycle counts as required Use inventory picklists to remove product from inventory to manufacturing WIP orders and shipping orders Loads product and materials on trailers from inventory locations and stage loaded trailers in trailer staging area Transport bolsters materials to staging areas and to/from inventory locations Help perform preventive maintenance on equipment Reports any unsafe issues to the department lead person, supervisor or maintenance technician Maintain good housekeeping by keeping work area free of debris and trash Ensure all scrap tubes from the tube mill and small pole manufacturing departments are disposed of properly. Use stacker magnetic crane to unload materials from trailers and rail cars and receive into inventory Use proper transaction to move material in and out of inventory Maintain appropriate professional competencies, certifications, licenses, etc., necessary to perform job Other duties as assigned Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities): Read tape measure & micrometer Ability to read and write English Ability to read & write, perform basic math: add, subtract, decimals and fraction Become a certified forklift operator Become proficient in operating a straddle truck Complete overhead crane training program Highly Qualified Candidates Will Also Possess These Qualifications: 1 year prior experience operating a Stacker Overhead Crane High School Diploma or GED 1 year prior experience working in a manufacturing environment 1 year prior working experience operating heavy equipment The ability to accurately and honestly check one's own work for quality assurance Must be a person of passion and integrity who has the drive to excel and deliver exceptional results Working Environment and Physical Efforts: Incumbent will also be exposed to production facilities where specific PPE will be required such as hand, hearing, foot, eye, and head protection.There will also be exposure to outside elements for extended periods of time.Being outside will also expose them to material handling equipment such as forklifts, straddle trucks, and shag trucks. Physical effort is moderate to heavy. A high degree of physical effort is used due to continuous heavy lifting. Employee is lifting 35 to 50 lbs. approximately 80-90% of the time. Standing, bending, or walking is required 85% of the time. Loading ESS products can cause the employee to climb and lift in unusual positions. Securing platforms, containers and flatbeds means that the employee must be able to climb up to 8' off the ground. Pushing and pulling to place carts in close quarters takes extra physical effort. Although some items weigh more, a maximum lift of 50 lbs. is all that is required. Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short-term and long-term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law.Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email .
The pay range per hour is $34.10 - $39.95 Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at . Engineering & Facilities Maintenance Technician 2 (MT2) About job: Benefits eligible within two weeks of employment Currently hiring for below shifts: B3 Key: Tuesday through Friday from 9:00pm - 7:00am About us: Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. Learn more about Target here . A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible-a critical differentiator and one of the most essential Logistics functions. You'll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it's through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you'll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest. As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will: Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS) Adjust scanners, cameras, field buses, scales and printer applicators Reset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys) Clean, lubricate, and calibrate equipment Use appropriate job plans, procedures, and manuals Maintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc. Assist with basic electronics/ Programmable Logic Controls troubleshooting Conduct maintenance and basic troubleshooting of all types of industrial robots Utilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used) Develop and maintain positive working relationships across all levels of the organization Follow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazards Operate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies F&B Only: Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. Job duties may change at any time due to business needs. About you: Physical Demands (must be able to perform with or without reasonable accommodation): Regular bending, lifting, stretching and reaching both below the waist and above the head Lift and move totes up to 49 pounds each Walking within and around the site with great frequency Ability to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heights Full manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation) Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfaces Ability to stand/walk for up to 10-12 hours Qualifications: High school diploma or equivalent required Possess or ability to obtain a valid driver's license PC competency and ability to use mobile apps on handheld devices Familiar with wiring diagrams, symbols and electrical measuring F&B Only: Comfortable working in a temperature-controlled environment Experience in the following areas: Work order management Preventive/predictive maintenance procedures Basic blueprint and schematic reading Electrical and electronic principles Basic metal fabrication and welding Industrial Controls and Electronics Ability to troubleshoot basic Input/Output functions Programmable Logic Control (PLC) programs Desired: Degree from a vocational school or college with a focus in the Mechanical or Electrical field 2+ years apprenticeship or equivalent experience in the Mechanical or Electrical field Experience with automated conveyor systems and controls Experience with Material Handling Equipment (MHE) safety standards Experience with robotic operation/ maintenance Benefits Eligibility Please paste this url into your preferred browser to learn about benefits eligibility for this role: Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: Americans with Disabilities Act (ADA) In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to .
09/05/2025
Full time
The pay range per hour is $34.10 - $39.95 Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at . Engineering & Facilities Maintenance Technician 2 (MT2) About job: Benefits eligible within two weeks of employment Currently hiring for below shifts: B3 Key: Tuesday through Friday from 9:00pm - 7:00am About us: Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. Learn more about Target here . A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible-a critical differentiator and one of the most essential Logistics functions. You'll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it's through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you'll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest. As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will: Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS) Adjust scanners, cameras, field buses, scales and printer applicators Reset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys) Clean, lubricate, and calibrate equipment Use appropriate job plans, procedures, and manuals Maintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc. Assist with basic electronics/ Programmable Logic Controls troubleshooting Conduct maintenance and basic troubleshooting of all types of industrial robots Utilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used) Develop and maintain positive working relationships across all levels of the organization Follow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazards Operate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies F&B Only: Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. Job duties may change at any time due to business needs. About you: Physical Demands (must be able to perform with or without reasonable accommodation): Regular bending, lifting, stretching and reaching both below the waist and above the head Lift and move totes up to 49 pounds each Walking within and around the site with great frequency Ability to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heights Full manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation) Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfaces Ability to stand/walk for up to 10-12 hours Qualifications: High school diploma or equivalent required Possess or ability to obtain a valid driver's license PC competency and ability to use mobile apps on handheld devices Familiar with wiring diagrams, symbols and electrical measuring F&B Only: Comfortable working in a temperature-controlled environment Experience in the following areas: Work order management Preventive/predictive maintenance procedures Basic blueprint and schematic reading Electrical and electronic principles Basic metal fabrication and welding Industrial Controls and Electronics Ability to troubleshoot basic Input/Output functions Programmable Logic Control (PLC) programs Desired: Degree from a vocational school or college with a focus in the Mechanical or Electrical field 2+ years apprenticeship or equivalent experience in the Mechanical or Electrical field Experience with automated conveyor systems and controls Experience with Material Handling Equipment (MHE) safety standards Experience with robotic operation/ maintenance Benefits Eligibility Please paste this url into your preferred browser to learn about benefits eligibility for this role: Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: Americans with Disabilities Act (ADA) In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to .
Anderson Dahlen Description: Gray's Specialty Equipment segment offers a comprehensive range of expert services, including design, manufacturing, integration, installation, and maintenance of some of the most advanced systems in the food, industrial, pharmaceutical, and vacuum science markets. From components to fully integrated equipment, we provide purpose-built solutions that integrate seamlessly into larger facility design-build, expansion, and retrofit projects. The Specialty Equipment segment includes Anderson Dahlen, located in Ramsey, MN and Waconia, MN, and AD Process Equipment, located in Naperville, IL. Anderson Dahlen specializes in stainless steel and specialty alloy fabrication and is ISO 9001:2015 certified, as well as ASME, AWS, and PED compliant. AD Process Equipment features a dedicated control panel fabrication shop, in-house engineering capabilities, and manufacturing space to support customized process system solutions. The wage range for this role takes into account a wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; as well as other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. It is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $24 to $34 hourly. PRIMARY OBJECTIVE OF THE POSITION: Act as the primary quality contact who drives excellence across all functions as well as performing standard inspections, tests, and other tasks to determine whether manufactured products meet customer specifications and quality expectations. MAJOR AREAS OF ACCOUNTABILITY: Develops, maintains, and portrays a high degree of professionalism and technical competence both within and outside the organization, encouraging excellence through example. Perform dimensional, receiving, in process and final inspections as required. Assist in the development of control/ inspection plans to ensure product compliance. Support Lean/continuous improvement principles and initiatives. Identify the root cause of technical issues and recommend fixes. Inspect product materials and electrical systems for defects and durability. Manage and update calibration tool lists and facilitate outside calibration activities Follow all company safety protocols Executes measurement programs on metrology equipment Prepares necessary documentation and ensures paperwork compliance on all inspected items, including scanning and filing documents to appropriate locations Accept or reject parts/product based on customer specifications and inspection results Other duties as assigned Requirements: QUALIFICATIONS FOR ENTRY: Associates degree or equivalent combination of certificates and experience Ability to lead and facilitate improvement teams in problem solving. Experience in inspection methods, to include set-ups, blueprint reading and GD&T. A good understanding of machining, welding, and metal fabrication Excellent organizational and prioritization skills Very strong interpersonal skills Excellent written and verbal communication skills Experience with Lean Mfg. and DMAIC problem solving skills. Ability to read, analyze, and interpret specifications, prints, and technical documents. Experience with 1D, 2D, and 3D metrology methods and devices Additional certification in Quality Assurance is a plus PHYSICAL REQUIREMENTS: The company fosters a manufacturing-type environment. The physical demands described below are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Lift/Carry- 0-10 lbs.- Occasionally 11-50 lbs.- Never 51-100 lbs.- Never Push/Pull- 0-25 lbs.- Occasionally 26-75 lbs.- Never 76-100 lbs.- Never Bend- 0-33% during an 8-hour shift Twist/Turn- 0-33% during an 8-hour shift Kneel/Squat- Not at all Sit- 67-100% during an 8-hour shift. Stand/Walk- 0-33% during an 8-hour shift Overhead Reaching- 0-33% during an 8-hour shift Ladder/Stair- 0-33% during an 8-hour shift EEO DISCLAIMER: Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Compensation details: 24-34 Hourly Wage PIc3bcfcc1-
09/05/2025
Full time
Anderson Dahlen Description: Gray's Specialty Equipment segment offers a comprehensive range of expert services, including design, manufacturing, integration, installation, and maintenance of some of the most advanced systems in the food, industrial, pharmaceutical, and vacuum science markets. From components to fully integrated equipment, we provide purpose-built solutions that integrate seamlessly into larger facility design-build, expansion, and retrofit projects. The Specialty Equipment segment includes Anderson Dahlen, located in Ramsey, MN and Waconia, MN, and AD Process Equipment, located in Naperville, IL. Anderson Dahlen specializes in stainless steel and specialty alloy fabrication and is ISO 9001:2015 certified, as well as ASME, AWS, and PED compliant. AD Process Equipment features a dedicated control panel fabrication shop, in-house engineering capabilities, and manufacturing space to support customized process system solutions. The wage range for this role takes into account a wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; as well as other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. It is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $24 to $34 hourly. PRIMARY OBJECTIVE OF THE POSITION: Act as the primary quality contact who drives excellence across all functions as well as performing standard inspections, tests, and other tasks to determine whether manufactured products meet customer specifications and quality expectations. MAJOR AREAS OF ACCOUNTABILITY: Develops, maintains, and portrays a high degree of professionalism and technical competence both within and outside the organization, encouraging excellence through example. Perform dimensional, receiving, in process and final inspections as required. Assist in the development of control/ inspection plans to ensure product compliance. Support Lean/continuous improvement principles and initiatives. Identify the root cause of technical issues and recommend fixes. Inspect product materials and electrical systems for defects and durability. Manage and update calibration tool lists and facilitate outside calibration activities Follow all company safety protocols Executes measurement programs on metrology equipment Prepares necessary documentation and ensures paperwork compliance on all inspected items, including scanning and filing documents to appropriate locations Accept or reject parts/product based on customer specifications and inspection results Other duties as assigned Requirements: QUALIFICATIONS FOR ENTRY: Associates degree or equivalent combination of certificates and experience Ability to lead and facilitate improvement teams in problem solving. Experience in inspection methods, to include set-ups, blueprint reading and GD&T. A good understanding of machining, welding, and metal fabrication Excellent organizational and prioritization skills Very strong interpersonal skills Excellent written and verbal communication skills Experience with Lean Mfg. and DMAIC problem solving skills. Ability to read, analyze, and interpret specifications, prints, and technical documents. Experience with 1D, 2D, and 3D metrology methods and devices Additional certification in Quality Assurance is a plus PHYSICAL REQUIREMENTS: The company fosters a manufacturing-type environment. The physical demands described below are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Lift/Carry- 0-10 lbs.- Occasionally 11-50 lbs.- Never 51-100 lbs.- Never Push/Pull- 0-25 lbs.- Occasionally 26-75 lbs.- Never 76-100 lbs.- Never Bend- 0-33% during an 8-hour shift Twist/Turn- 0-33% during an 8-hour shift Kneel/Squat- Not at all Sit- 67-100% during an 8-hour shift. Stand/Walk- 0-33% during an 8-hour shift Overhead Reaching- 0-33% during an 8-hour shift Ladder/Stair- 0-33% during an 8-hour shift EEO DISCLAIMER: Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Compensation details: 24-34 Hourly Wage PIc3bcfcc1-
We are seeking a motivated and experienced Fire alarm technician to join our team in our Georgia office. In this role, you will provide technical field support and service to our customers. You will be responsible for troubleshooting and resolving customer issues, conducting on site installations and repairs, as well as on-going training for customer personnel. As your employer, we offer an advancement plan, plus we will subsidize 82.5% of the cost of your medical benefits. Other benefits are available for purchase by the employee, i.e. vision, dental, life, etc New hires receive 15 days of PTO to start beginning January 1, prorated the first year based on hire date. PTO increases with years in service. Employees are paid for 10 company holidays. If you are ambitious and a self motivated professional with a strong background in fire alarm safety products, we would love to have you as part of our team. The Fire Alarm Technician is responsible for the following: Coordinate with contractors in the process of installation of fire alarm systems sold by our company Perform system commissioning on fire alarm systems including loading software programs and implementing modifications as necessary Conduct testing and inspect fire alarm systems under maintenance agreements Troubleshoot and repair network hardware and software issues Identify code and non-conformance issues Makes recommendations regarding both systems installations and service contract facilities Generate detailed daily reports, using company software, on activities completed, deferred and those requiring further action or material Support emergency on-call assignments Support 2nd & 3rd shift work The qualified candidate for a Fire Alarm Technician should possess the following requirements: A minimum of 3 years experience in the installation and maintenance of Fire Safety Products Knowledge of Fire alarm system programming Certification of Florida Fire alarm system agent (FASA) Knowledge of Siemens Fire Alarm Equipment Support 2nd & 3rd shift work National Institute for Certification in Engineering Technology (NICET) Certification Requirements Level I Associates degree in Electronics or related field or equivalent experience in the installation and maintenance of low voltage electronic systems Fluent in English Must be legally authorized to live within the United States Must be legally authorized to work within the United States Must be a legal citizen of the United States Excellent customer service skills Strong verbal and written communications skills The ability to read architectural and engineering drawings and prints Skilled in the PC applications in a client/server environment Ability to work independently and in team environment Ability to lift seventy-five (75) pounds unassisted Ability to work on a lift up to 40 feet Knowledge of safety regulations and procedures Must have valid state drivers license and good driving record Compensation details: 24-40 Hourly Wage PI60920b1-
09/05/2025
Full time
We are seeking a motivated and experienced Fire alarm technician to join our team in our Georgia office. In this role, you will provide technical field support and service to our customers. You will be responsible for troubleshooting and resolving customer issues, conducting on site installations and repairs, as well as on-going training for customer personnel. As your employer, we offer an advancement plan, plus we will subsidize 82.5% of the cost of your medical benefits. Other benefits are available for purchase by the employee, i.e. vision, dental, life, etc New hires receive 15 days of PTO to start beginning January 1, prorated the first year based on hire date. PTO increases with years in service. Employees are paid for 10 company holidays. If you are ambitious and a self motivated professional with a strong background in fire alarm safety products, we would love to have you as part of our team. The Fire Alarm Technician is responsible for the following: Coordinate with contractors in the process of installation of fire alarm systems sold by our company Perform system commissioning on fire alarm systems including loading software programs and implementing modifications as necessary Conduct testing and inspect fire alarm systems under maintenance agreements Troubleshoot and repair network hardware and software issues Identify code and non-conformance issues Makes recommendations regarding both systems installations and service contract facilities Generate detailed daily reports, using company software, on activities completed, deferred and those requiring further action or material Support emergency on-call assignments Support 2nd & 3rd shift work The qualified candidate for a Fire Alarm Technician should possess the following requirements: A minimum of 3 years experience in the installation and maintenance of Fire Safety Products Knowledge of Fire alarm system programming Certification of Florida Fire alarm system agent (FASA) Knowledge of Siemens Fire Alarm Equipment Support 2nd & 3rd shift work National Institute for Certification in Engineering Technology (NICET) Certification Requirements Level I Associates degree in Electronics or related field or equivalent experience in the installation and maintenance of low voltage electronic systems Fluent in English Must be legally authorized to live within the United States Must be legally authorized to work within the United States Must be a legal citizen of the United States Excellent customer service skills Strong verbal and written communications skills The ability to read architectural and engineering drawings and prints Skilled in the PC applications in a client/server environment Ability to work independently and in team environment Ability to lift seventy-five (75) pounds unassisted Ability to work on a lift up to 40 feet Knowledge of safety regulations and procedures Must have valid state drivers license and good driving record Compensation details: 24-40 Hourly Wage PI60920b1-
ACS Air Conditioning Specialist Inc
Knoxville, Tennessee
Plumbing Service Technician Job Description About the Role: As a Plumbing Service Technician at Chancey & Reynolds in Knoxville, TN, you will play a critical role in ensuring the efficient installation, maintenance, and repair of plumbing systems for residential clients. This position requires a deep understanding of plumbing codes, system diagnostics, and the ability to troubleshoot issues to deliver high-quality service. You will be responsible for performing routine inspections, identifying potential problems, and implementing effective solutions to maintain system integrity and customer satisfaction. Collaboration with other technicians and customer service teams will be essential to coordinate work schedules and provide timely updates to clients. Ultimately, your expertise will contribute to the companys reputation for reliability and excellence in plumbing services, supporting the overall success of Chancey! Minimum Qualifications: High school diploma or equivalent. Valid plumbing license or certification as required by state or local regulations. Minimum of 3-5 years of experience in plumbing service and repair. Strong knowledge of plumbing systems, tools, and safety procedures. Ability to read and interpret blueprints, technical drawings, and plumbing codes. Preferred Qualifications: Experience working with HVAC-related plumbing systems. Additional certifications in specialized plumbing areas such as backflow prevention or gas piping. Proficiency with Service Titan or similar software. Strong customer service skills and experience working in a client-facing role. Ability to mentor junior technicians and provide on-the-job training. Responsibilities: Diagnose and repair plumbing issues including leaks, clogs, and faulty fixtures in residential and commercial properties. Install new plumbing systems and components according to blueprints, specifications, and local codes. Compensation details: 24-29 Hourly Wage PI67d21d6f29f7-1536
09/05/2025
Full time
Plumbing Service Technician Job Description About the Role: As a Plumbing Service Technician at Chancey & Reynolds in Knoxville, TN, you will play a critical role in ensuring the efficient installation, maintenance, and repair of plumbing systems for residential clients. This position requires a deep understanding of plumbing codes, system diagnostics, and the ability to troubleshoot issues to deliver high-quality service. You will be responsible for performing routine inspections, identifying potential problems, and implementing effective solutions to maintain system integrity and customer satisfaction. Collaboration with other technicians and customer service teams will be essential to coordinate work schedules and provide timely updates to clients. Ultimately, your expertise will contribute to the companys reputation for reliability and excellence in plumbing services, supporting the overall success of Chancey! Minimum Qualifications: High school diploma or equivalent. Valid plumbing license or certification as required by state or local regulations. Minimum of 3-5 years of experience in plumbing service and repair. Strong knowledge of plumbing systems, tools, and safety procedures. Ability to read and interpret blueprints, technical drawings, and plumbing codes. Preferred Qualifications: Experience working with HVAC-related plumbing systems. Additional certifications in specialized plumbing areas such as backflow prevention or gas piping. Proficiency with Service Titan or similar software. Strong customer service skills and experience working in a client-facing role. Ability to mentor junior technicians and provide on-the-job training. Responsibilities: Diagnose and repair plumbing issues including leaks, clogs, and faulty fixtures in residential and commercial properties. Install new plumbing systems and components according to blueprints, specifications, and local codes. Compensation details: 24-29 Hourly Wage PI67d21d6f29f7-1536