Career opportunity to join expanding chemical leader as Lead Engineer for maintenance, reliability for fixed and rotating equipment for the plant site. Provides asset maintenance, reliability, outage guidance and overall asset care. Responsibilities: Improve/develop a reliability strategy based on the business needs including identification of the critical spare equipment/ parts and determination of their inventory parameters, enhancement of the PM program, and development of an asset care plan. Manage all areas of mechanical equipment related maintenance not being covered by the MI program. Coordinate plant changes, both equipment and process, which improve plant OEE, yields, equipment, reliability, process quality, and preventive maintenance. Analyze maintenance costs and/or repair frequencies and use existing analyses of OEE losses to identify bad actors and develop measures to improve or replace the assets. Lead and manage cross-functional teams with Reliability Centered Maintenance, Root Cause Analysis and Six Sigma Teams, Investigations, and Equipment Improvements. Prepare monthly reports summarizing the status of major maintenance and reliability activities and their on-going capital projects. Execute maintenance work orders assuring work order quality metrics are met as well as assuring operators are entering work orders in JDE for all non-optimal issues in the plant. Set the weekly/daily maintenance scheduling priorities. Lead and coordinate RCA investigations for all bad actors and significant reliability incidents. Assign RCA leaders and resources. Qualifications : BS Engineering degree with 5+ years experience as Reliability/ Maintenance Engineer working in a PSM regulated chemical plant. Solid technical knowledge of predictive and preventive maintenance, mechanical integrity, and asset care/ OEE. Extensive experience with RCM, RCA, Six Sigma, CMMS programs. Ability to work now and in the future without sponsorship.
12/05/2025
Career opportunity to join expanding chemical leader as Lead Engineer for maintenance, reliability for fixed and rotating equipment for the plant site. Provides asset maintenance, reliability, outage guidance and overall asset care. Responsibilities: Improve/develop a reliability strategy based on the business needs including identification of the critical spare equipment/ parts and determination of their inventory parameters, enhancement of the PM program, and development of an asset care plan. Manage all areas of mechanical equipment related maintenance not being covered by the MI program. Coordinate plant changes, both equipment and process, which improve plant OEE, yields, equipment, reliability, process quality, and preventive maintenance. Analyze maintenance costs and/or repair frequencies and use existing analyses of OEE losses to identify bad actors and develop measures to improve or replace the assets. Lead and manage cross-functional teams with Reliability Centered Maintenance, Root Cause Analysis and Six Sigma Teams, Investigations, and Equipment Improvements. Prepare monthly reports summarizing the status of major maintenance and reliability activities and their on-going capital projects. Execute maintenance work orders assuring work order quality metrics are met as well as assuring operators are entering work orders in JDE for all non-optimal issues in the plant. Set the weekly/daily maintenance scheduling priorities. Lead and coordinate RCA investigations for all bad actors and significant reliability incidents. Assign RCA leaders and resources. Qualifications : BS Engineering degree with 5+ years experience as Reliability/ Maintenance Engineer working in a PSM regulated chemical plant. Solid technical knowledge of predictive and preventive maintenance, mechanical integrity, and asset care/ OEE. Extensive experience with RCM, RCA, Six Sigma, CMMS programs. Ability to work now and in the future without sponsorship.
Job Title: Security Solutions Lead Specialist Engineer Location: Bentonville, Arkansas Experience: 12+ Years Employment Type: Contract Interview Type: In-Person or Webcam Job Description We are seeking an experienced Security Solutions Lead Specialist Engineer to design, architect, and implement enterprise-level security solutions across large-scale environments. This role requires hands-on technical expertise, leadership abilities, and strong experience in evaluating, deploying, and optimizing security platforms and frameworks. The ideal candidate will have proven experience working in complex security ecosystems and collaborating with cross-functional engineering, architecture, and operations teams. Key Responsibilities Lead the strategy, architecture, and deployment of enterprise security solutions across cloud, on-premises, and hybrid environments. Assess existing security infrastructure and recommend improvements, risk mitigation strategies, and security best practices. Provide end-to-end technical expertise for cybersecurity platforms, such as SIEM, SOAR, IAM, PAM, security gateways, endpoint security, and network security tools. Oversee implementation, integration, and configuration of security tools and automation frameworks. Conduct security gap assessments, vulnerability reviews, threat analysis, and security posture evaluations. Partner with engineering and operations teams to ensure security solutions align with compliance, regulatory, and organizational standards. Lead security incident response planning and support remediation activities. Develop and maintain security documentation, technical architecture diagrams, and operational procedures. Mentor junior engineers and serve as a technical point of escalation in complex environments. Support audits, risk assessments, penetration testing activities, and third-party evaluations. Participate in roadmap planning, technology evaluations, proof-of-concept initiatives, and performance assessments. Required Qualifications 12+ years of hands-on experience in cybersecurity engineering or enterprise security architecture roles. Strong expertise in major security solutions such as SIEM (Splunk, QRadar, Sentinel), SOAR, EDR/XDR, CASB, IAM, PAM (CyberArk, BeyondTrust), firewalls, VPNs, and network security platforms. Deep understanding of security frameworks such as NIST, ISO 27001, CIS, MITRE ATT&CK, and Zero Trust Architecture. Proven experience designing and implementing enterprise-wide security programs or projects. Strong background in cloud security (AWS, Azure, or GCP) including cloud identity, resource protection, and workload security. Hands-on experience with incident response, threat detection, and vulnerability management. Ability to lead cross-functional engineering teams and manage large-scale implementations. Excellent communication and documentation skills. Preferred Skills Relevant certifications such as CISSP, CISM, CCSP, CEH, OSCP, or SANS certifications. Experience with automation and scripting (Python, PowerShell, Shell, or similar Experience in integrating security tools with DevOps pipelines and CI/CD platforms. Experience in retail or large enterprise environments supporting high-scale technology operations. Knowledge of container security, Kubernetes, microservices, and API security.
12/04/2025
Job Title: Security Solutions Lead Specialist Engineer Location: Bentonville, Arkansas Experience: 12+ Years Employment Type: Contract Interview Type: In-Person or Webcam Job Description We are seeking an experienced Security Solutions Lead Specialist Engineer to design, architect, and implement enterprise-level security solutions across large-scale environments. This role requires hands-on technical expertise, leadership abilities, and strong experience in evaluating, deploying, and optimizing security platforms and frameworks. The ideal candidate will have proven experience working in complex security ecosystems and collaborating with cross-functional engineering, architecture, and operations teams. Key Responsibilities Lead the strategy, architecture, and deployment of enterprise security solutions across cloud, on-premises, and hybrid environments. Assess existing security infrastructure and recommend improvements, risk mitigation strategies, and security best practices. Provide end-to-end technical expertise for cybersecurity platforms, such as SIEM, SOAR, IAM, PAM, security gateways, endpoint security, and network security tools. Oversee implementation, integration, and configuration of security tools and automation frameworks. Conduct security gap assessments, vulnerability reviews, threat analysis, and security posture evaluations. Partner with engineering and operations teams to ensure security solutions align with compliance, regulatory, and organizational standards. Lead security incident response planning and support remediation activities. Develop and maintain security documentation, technical architecture diagrams, and operational procedures. Mentor junior engineers and serve as a technical point of escalation in complex environments. Support audits, risk assessments, penetration testing activities, and third-party evaluations. Participate in roadmap planning, technology evaluations, proof-of-concept initiatives, and performance assessments. Required Qualifications 12+ years of hands-on experience in cybersecurity engineering or enterprise security architecture roles. Strong expertise in major security solutions such as SIEM (Splunk, QRadar, Sentinel), SOAR, EDR/XDR, CASB, IAM, PAM (CyberArk, BeyondTrust), firewalls, VPNs, and network security platforms. Deep understanding of security frameworks such as NIST, ISO 27001, CIS, MITRE ATT&CK, and Zero Trust Architecture. Proven experience designing and implementing enterprise-wide security programs or projects. Strong background in cloud security (AWS, Azure, or GCP) including cloud identity, resource protection, and workload security. Hands-on experience with incident response, threat detection, and vulnerability management. Ability to lead cross-functional engineering teams and manage large-scale implementations. Excellent communication and documentation skills. Preferred Skills Relevant certifications such as CISSP, CISM, CCSP, CEH, OSCP, or SANS certifications. Experience with automation and scripting (Python, PowerShell, Shell, or similar Experience in integrating security tools with DevOps pipelines and CI/CD platforms. Experience in retail or large enterprise environments supporting high-scale technology operations. Knowledge of container security, Kubernetes, microservices, and API security.
Job Title: UI/UX Design Lead Specialist Engineer Location: Bentonville, Arkansas Experience Required: 12+ Years Employment Type: Contract Interview Type: In-Person or Webcam Job Description We are seeking an experienced UI/UX Design Lead Specialist Engineer to join our team in Bentonville, Arkansas. The ideal candidate will play a critical role in leading the product design vision, strategy, and execution for complex digital solutions. This role requires deep expertise in user-centered design methodologies, strong collaboration with cross-functional teams, mentorship capabilities, and hands-on experience designing enterprise-level applications. The candidate should have proven experience delivering scalable and intuitive design solutions that enhance user experience across web and mobile platforms. Key Responsibilities Lead end-to-end product design initiatives including research, ideation, wireframing, prototyping, usability testing, and final design delivery. Collaborate closely with Product Managers, Engineering teams, Business Stakeholders, and other designers to define user experience strategies and product direction. Create high-quality design artifacts including user flows, journey maps, interactive prototypes, and UI specifications. Conduct user research, competitive analysis, and usability studies to identify user needs and validate design decisions. Oversee design consistency and compliance with established design systems and accessibility standards. Lead design reviews and provide constructive feedback to design team members. Translate complex business requirements into simple, user-friendly, and visually compelling interfaces. Ensure smooth handoff to development teams and support implementation throughout the development lifecycle. Mentor junior designers and contribute to the growth and maturity of the design practice. Apply expertise in modern design tools and emerging design trends to continuously optimize user experience. Required Qualifications Bachelor's or Master's degree in Design, Human-Computer Interaction (HCI), Computer Science, or a related field. 12+ years of professional experience as a UI/UX Designer, Product Designer, or similar role. Strong portfolio demonstrating research-based, end-to-end product design work for enterprise-level platforms. Expert proficiency with design and prototyping tools such as Figma, Sketch, A e XD, InVision, and similar tools. Hands-on experience designing responsive web and mobile solutions. Deep understanding of UX principles, design systems, information architecture, wireframing, and prototyping methodologies. Ability to work in an agile development environment and manage multiple priorities simultaneously. Strong communication, stakeholder management, and presentation skills. Understanding of accessibility (WCAG standards) and usability practices. Preferred Skills Experience working in retail, e-commerce, or large enterprise environments. Prior experience designing for high-scale customer or employee-facing applications. Familiarity with front-end development technologies such as HTML, CSS, JavaScript, or React. Experience managing or leading cross-functional design teams. Knowledge of user analytics tools such as Google Analytics, Hotjar, Mixpanel, or similar platforms. Certification in UX or related design domains (Nielsen Norman Group, HFI, etc.
12/04/2025
Job Title: UI/UX Design Lead Specialist Engineer Location: Bentonville, Arkansas Experience Required: 12+ Years Employment Type: Contract Interview Type: In-Person or Webcam Job Description We are seeking an experienced UI/UX Design Lead Specialist Engineer to join our team in Bentonville, Arkansas. The ideal candidate will play a critical role in leading the product design vision, strategy, and execution for complex digital solutions. This role requires deep expertise in user-centered design methodologies, strong collaboration with cross-functional teams, mentorship capabilities, and hands-on experience designing enterprise-level applications. The candidate should have proven experience delivering scalable and intuitive design solutions that enhance user experience across web and mobile platforms. Key Responsibilities Lead end-to-end product design initiatives including research, ideation, wireframing, prototyping, usability testing, and final design delivery. Collaborate closely with Product Managers, Engineering teams, Business Stakeholders, and other designers to define user experience strategies and product direction. Create high-quality design artifacts including user flows, journey maps, interactive prototypes, and UI specifications. Conduct user research, competitive analysis, and usability studies to identify user needs and validate design decisions. Oversee design consistency and compliance with established design systems and accessibility standards. Lead design reviews and provide constructive feedback to design team members. Translate complex business requirements into simple, user-friendly, and visually compelling interfaces. Ensure smooth handoff to development teams and support implementation throughout the development lifecycle. Mentor junior designers and contribute to the growth and maturity of the design practice. Apply expertise in modern design tools and emerging design trends to continuously optimize user experience. Required Qualifications Bachelor's or Master's degree in Design, Human-Computer Interaction (HCI), Computer Science, or a related field. 12+ years of professional experience as a UI/UX Designer, Product Designer, or similar role. Strong portfolio demonstrating research-based, end-to-end product design work for enterprise-level platforms. Expert proficiency with design and prototyping tools such as Figma, Sketch, A e XD, InVision, and similar tools. Hands-on experience designing responsive web and mobile solutions. Deep understanding of UX principles, design systems, information architecture, wireframing, and prototyping methodologies. Ability to work in an agile development environment and manage multiple priorities simultaneously. Strong communication, stakeholder management, and presentation skills. Understanding of accessibility (WCAG standards) and usability practices. Preferred Skills Experience working in retail, e-commerce, or large enterprise environments. Prior experience designing for high-scale customer or employee-facing applications. Familiarity with front-end development technologies such as HTML, CSS, JavaScript, or React. Experience managing or leading cross-functional design teams. Knowledge of user analytics tools such as Google Analytics, Hotjar, Mixpanel, or similar platforms. Certification in UX or related design domains (Nielsen Norman Group, HFI, etc.
Job Title: Automation Architect Lead Specialist Engineer Location: Little Rock, Arkansas Experience: 12+ Years Employment Type: Contract Interview Type: In-Person or Webcam Job Description The Automation Architect Lead Specialist Engineer will be responsible for designing end-to-end automation strategies and leading the implementation of intelligent automation solutions across enterprise environments. This role involves architecture definition, solution design, tool selection, governance standards, and hands-on technical leadership. The ideal candidate will have extensive experience in automation frameworks, DevOps practices, CI/CD pipelines, cloud environments, and enterprise integrations. Key Responsibilities Lead the architecture, design, and development of enterprise automation solutions. Define automation strategies, frameworks, standards, governance, and best practices. Analyze business processes and identify automation opportunities using RPA, AI/ML, and workflow orchestration tools. Drive the implementation of automation pipelines within DevOps and CI/CD environments. Evaluate automation products, platforms, and technologies, and implement scalable and secure architectures. Collaborate closely with product owners, engineering teams, QA, operations, and business stakeholders. Provide technical leadership, mentoring, and architectural guidance to development and automation engineering teams. Integrate automation solutions with cloud platforms, application systems, and enterprise tools. Conduct technical assessments, solution reviews, and performance optimization. Ensure automation solutions meet compliance, reliability, and security standards. Manage automation lifecycle, monitoring, analytics, and continuous improvement initiatives. Required Qualifications Bachelor's or Master's degree in Computer Science, Engineering, or related field. 12+ years of experience in software engineering or automation engineering roles. Proven experience architecting enterprise automation solutions. Strong hands-on experience with automation technologies such as UiPath, Automation Anywhere, Blue Prism, Selenium, Python scripting, or similar tools. Experience with CI/CD tools such as Jenkins, GitLab CI, Azure DevOps, Bamboo, or similar. Deep understanding of DevOps concepts, Infrastructure as Code, and cloud automation (AWS, Azure, or GCP Experience with container platforms and orchestration such as Docker and Kubernetes. Strong knowledge of workflow automation, APIs, integrations, and microservices. Excellent problem-solving skills and ability to lead complex technical initiatives. Preferred Skills Experience with AI/ML-based automation and intelligent decision engines. Familiarity with ServiceNow, Appian, or other workflow orchestration platforms. Experience implementing security and compliance automation models. Exposure to agile methodologies, enterprise architecture frameworks, and automation centers of excellence. Certifications in automation tools, DevOps, or cloud platforms.
12/03/2025
Job Title: Automation Architect Lead Specialist Engineer Location: Little Rock, Arkansas Experience: 12+ Years Employment Type: Contract Interview Type: In-Person or Webcam Job Description The Automation Architect Lead Specialist Engineer will be responsible for designing end-to-end automation strategies and leading the implementation of intelligent automation solutions across enterprise environments. This role involves architecture definition, solution design, tool selection, governance standards, and hands-on technical leadership. The ideal candidate will have extensive experience in automation frameworks, DevOps practices, CI/CD pipelines, cloud environments, and enterprise integrations. Key Responsibilities Lead the architecture, design, and development of enterprise automation solutions. Define automation strategies, frameworks, standards, governance, and best practices. Analyze business processes and identify automation opportunities using RPA, AI/ML, and workflow orchestration tools. Drive the implementation of automation pipelines within DevOps and CI/CD environments. Evaluate automation products, platforms, and technologies, and implement scalable and secure architectures. Collaborate closely with product owners, engineering teams, QA, operations, and business stakeholders. Provide technical leadership, mentoring, and architectural guidance to development and automation engineering teams. Integrate automation solutions with cloud platforms, application systems, and enterprise tools. Conduct technical assessments, solution reviews, and performance optimization. Ensure automation solutions meet compliance, reliability, and security standards. Manage automation lifecycle, monitoring, analytics, and continuous improvement initiatives. Required Qualifications Bachelor's or Master's degree in Computer Science, Engineering, or related field. 12+ years of experience in software engineering or automation engineering roles. Proven experience architecting enterprise automation solutions. Strong hands-on experience with automation technologies such as UiPath, Automation Anywhere, Blue Prism, Selenium, Python scripting, or similar tools. Experience with CI/CD tools such as Jenkins, GitLab CI, Azure DevOps, Bamboo, or similar. Deep understanding of DevOps concepts, Infrastructure as Code, and cloud automation (AWS, Azure, or GCP Experience with container platforms and orchestration such as Docker and Kubernetes. Strong knowledge of workflow automation, APIs, integrations, and microservices. Excellent problem-solving skills and ability to lead complex technical initiatives. Preferred Skills Experience with AI/ML-based automation and intelligent decision engines. Familiarity with ServiceNow, Appian, or other workflow orchestration platforms. Experience implementing security and compliance automation models. Exposure to agile methodologies, enterprise architecture frameworks, and automation centers of excellence. Certifications in automation tools, DevOps, or cloud platforms.
Plastics Engineer Molded Products - Sherwood, AR Plastics Engineer Process Engineer Manufacturing Engineer Plastic Molding Injection Mold Blow Extrusion Tooling Designer Moldmaking Lean Applications Thermoplastics Thermoset _ . Seeking individual with process and tooling troubleshooting experience in a plastic molding environment to join a company producing parts with tight tolerances, undercuts, thin walls, and government regulated quality requirements. Support the Product Development group through: Using mold-filling simulation software to evaluate and optimize new mold designs and evaluate issues with existing tooling. Calculating gate locations, clamp pressure requirements, injection speed, fill time, flow restrictions, shot size, injection pressure, pressure distribution, venting issues, temperatures, weld lines, etc. Analyzing packing, warpage, and cooling to predict and prevent distortions and sinks. Working with the product design team for manufacturability issues. Evaluating and advising machinists on mold and tooling fabrication. Requires experience with multi-cavity tooling, mold filling software, experience with plastics processing, knowledge of toolmaking, etc. Requires degree in engineering, mathematics, sciences, or related field. Total earning potential to $160,000 from start with competitive salary and excellent bonus. Generous paid time off offerings from start, 401(k) contribution with $1 for $1 match, company paid pension plan, fully company paid medical, dental, vision, prescription drug, disability, AD&D and life insurance for employee and dependents. For complete details contact Christopher Moreno at: ext 264 Or submit resume online at: Or email to: Please reference when responding. Diedre Moire Corporation Education Requirements: Bachelor DegreeMinimum Experience Requirements: 2-5 yearsJob City Location: SherwoodJob State Location: ARJob Country Location: USASalary Range: $90,000 to $160,000 Diedre Moire Corporation, Inc. WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Plastics Engineer Process Engineer Manufacturing Engineer Plastic Molding Injection Mold Blow Extrusion Tooling Designer Moldmaking Lean Applications Thermoplastics Thermoset DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call
12/03/2025
Full time
Plastics Engineer Molded Products - Sherwood, AR Plastics Engineer Process Engineer Manufacturing Engineer Plastic Molding Injection Mold Blow Extrusion Tooling Designer Moldmaking Lean Applications Thermoplastics Thermoset _ . Seeking individual with process and tooling troubleshooting experience in a plastic molding environment to join a company producing parts with tight tolerances, undercuts, thin walls, and government regulated quality requirements. Support the Product Development group through: Using mold-filling simulation software to evaluate and optimize new mold designs and evaluate issues with existing tooling. Calculating gate locations, clamp pressure requirements, injection speed, fill time, flow restrictions, shot size, injection pressure, pressure distribution, venting issues, temperatures, weld lines, etc. Analyzing packing, warpage, and cooling to predict and prevent distortions and sinks. Working with the product design team for manufacturability issues. Evaluating and advising machinists on mold and tooling fabrication. Requires experience with multi-cavity tooling, mold filling software, experience with plastics processing, knowledge of toolmaking, etc. Requires degree in engineering, mathematics, sciences, or related field. Total earning potential to $160,000 from start with competitive salary and excellent bonus. Generous paid time off offerings from start, 401(k) contribution with $1 for $1 match, company paid pension plan, fully company paid medical, dental, vision, prescription drug, disability, AD&D and life insurance for employee and dependents. For complete details contact Christopher Moreno at: ext 264 Or submit resume online at: Or email to: Please reference when responding. Diedre Moire Corporation Education Requirements: Bachelor DegreeMinimum Experience Requirements: 2-5 yearsJob City Location: SherwoodJob State Location: ARJob Country Location: USASalary Range: $90,000 to $160,000 Diedre Moire Corporation, Inc. WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Plastics Engineer Process Engineer Manufacturing Engineer Plastic Molding Injection Mold Blow Extrusion Tooling Designer Moldmaking Lean Applications Thermoplastics Thermoset DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call
Job Title: Data Analytics Lead Specialist Engineer Location: Little Rock, Arkansas Experience Required: 12+ years Employment Type: Contract Interview Type: In-Person or Webcam Job Description The Data Analytics Lead Specialist Engineer will be responsible for driving advanced analytics initiatives and delivering data-driven insights that support business decision-making. This role involves leading complex data engineering and analytics projects, collaborating with cross-functional teams, and ensuring that analytical solutions are scalable, reliable, and aligned with organizational goals. The ideal candidate should have extensive experience in data architecture, analytics modeling, data quality practices, and leadership of analytics teams. Key Responsibilities Lead the strategy, design, and implementation of analytics solutions across enterprise environments. Collect, analyze, and interpret large structured and unstructured datasets to extract meaningful insights. Develop and optimize data pipelines, ETL processes, and analytical models. Guide data visualization efforts and deliver analytical dashboards and reporting solutions for stakeholders. Work closely with business units, product teams, and IT teams to understand analytical needs and translate requirements into technical solutions. Lead, mentor, and provide technical direction to analytics and data engineering teams. Establish best practices for data governance, data quality, security, and metadata management. Conduct advanced analytics, predictive modeling, forecasting, and statistical analysis to support business planning. Evaluate new technologies and analytics tools for continuous improvement. Troubleshoot and resolve analytics platform performance issues and data inconsistencies. Required Qualifications Bachelor's or Master's degree in Computer Science, Data Science, Information Technology, Statistics, Engineering, or a related field. 12+ years of experience in data analytics, data engineering, or business intelligence. Strong expertise in SQL, Python, R, or other analytics languages. Hands-on experience with data warehousing technologies and cloud platforms such as AWS, Azure, or Google Cloud. Proficiency in ETL tools and frameworks such as Informatica, Talend, or Apache Spark. Demonstrated experience with BI and reporting tools such as Power BI, Tableau, Qlik, or Looker. Strong background in statistical modeling, machine learning, and predictive analytics. Proven ability to lead enterprise analytics initiatives and manage cross-functional teams. Strong analytical thinking, problem-solving, and communication skills. Preferred Skills Experience working in Agile or DevOps environments. Knowledge of big data technologies such as Hadoop, Kafka, Hive, or Snowflake. Experience in implementing data governance, MDM, and metadata management solutions. Familiarity with AI and automation capabilities such as NLP, generative AI, or advanced ML frameworks. Experience in an enterprise-level or large-scale corporate environment. Strong presentation skills for technical and non-technical audiences.
12/03/2025
Job Title: Data Analytics Lead Specialist Engineer Location: Little Rock, Arkansas Experience Required: 12+ years Employment Type: Contract Interview Type: In-Person or Webcam Job Description The Data Analytics Lead Specialist Engineer will be responsible for driving advanced analytics initiatives and delivering data-driven insights that support business decision-making. This role involves leading complex data engineering and analytics projects, collaborating with cross-functional teams, and ensuring that analytical solutions are scalable, reliable, and aligned with organizational goals. The ideal candidate should have extensive experience in data architecture, analytics modeling, data quality practices, and leadership of analytics teams. Key Responsibilities Lead the strategy, design, and implementation of analytics solutions across enterprise environments. Collect, analyze, and interpret large structured and unstructured datasets to extract meaningful insights. Develop and optimize data pipelines, ETL processes, and analytical models. Guide data visualization efforts and deliver analytical dashboards and reporting solutions for stakeholders. Work closely with business units, product teams, and IT teams to understand analytical needs and translate requirements into technical solutions. Lead, mentor, and provide technical direction to analytics and data engineering teams. Establish best practices for data governance, data quality, security, and metadata management. Conduct advanced analytics, predictive modeling, forecasting, and statistical analysis to support business planning. Evaluate new technologies and analytics tools for continuous improvement. Troubleshoot and resolve analytics platform performance issues and data inconsistencies. Required Qualifications Bachelor's or Master's degree in Computer Science, Data Science, Information Technology, Statistics, Engineering, or a related field. 12+ years of experience in data analytics, data engineering, or business intelligence. Strong expertise in SQL, Python, R, or other analytics languages. Hands-on experience with data warehousing technologies and cloud platforms such as AWS, Azure, or Google Cloud. Proficiency in ETL tools and frameworks such as Informatica, Talend, or Apache Spark. Demonstrated experience with BI and reporting tools such as Power BI, Tableau, Qlik, or Looker. Strong background in statistical modeling, machine learning, and predictive analytics. Proven ability to lead enterprise analytics initiatives and manage cross-functional teams. Strong analytical thinking, problem-solving, and communication skills. Preferred Skills Experience working in Agile or DevOps environments. Knowledge of big data technologies such as Hadoop, Kafka, Hive, or Snowflake. Experience in implementing data governance, MDM, and metadata management solutions. Familiarity with AI and automation capabilities such as NLP, generative AI, or advanced ML frameworks. Experience in an enterprise-level or large-scale corporate environment. Strong presentation skills for technical and non-technical audiences.
Plastic Molding Tooling-Process Engineer - Bella Vista, AR Plastics Engineer Process Engineer Manufacturing Engineer Plastic Molding Injection Mold Blow Extrusion Tooling Designer Moldmaking Lean Applications Thermoplastics Thermoset _ . Seeking experienced Project Engineer to head and support improvement of processes and the launch of new plastic molded components. Shall: Support product design team especially on manufacturability and tooling issues. Develop and improve molding techniques and train employees accordingly. Determine cost effective mold designs and resolve mold design issues collaborating with customers and suppliers. Implement Quality Management System protocols for new products. Plan for short and long-term needs of manufacturing and participate in sourcing, purchase and commissioning of necessary equipment for optimization of factory. Qualifications: BS in Engineering or similar technical degree. 3+ years track record leading development of plastic and rubber parts and solving manufacturing problems. Experience in Validation of system. Potential total compensation package to $160,000 with peformance bonus, company paid family doctor, hospitalization, prescription, dental and vision as well as life and disability insurance. Employee assistance programs including tuition reimbursement and more. For complete details contact Christopher Moreno at: ext 264 Or submit resume online at: Or email to: Please reference when responding. Diedre Moire Corporation Education Requirements: Bachelor DegreeMinimum Experience Requirements: 2-5 yearsJob City Location: Bella VistaJob State Location: ARJob Country Location: USASalary Range: $90,000 to $160,000 Diedre Moire Corporation, Inc. WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Plastics Engineer Process Engineer Manufacturing Engineer Plastic Molding Injection Mold Blow Extrusion Tooling Designer Moldmaking Lean Applications Thermoplastics Thermoset DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call
12/02/2025
Full time
Plastic Molding Tooling-Process Engineer - Bella Vista, AR Plastics Engineer Process Engineer Manufacturing Engineer Plastic Molding Injection Mold Blow Extrusion Tooling Designer Moldmaking Lean Applications Thermoplastics Thermoset _ . Seeking experienced Project Engineer to head and support improvement of processes and the launch of new plastic molded components. Shall: Support product design team especially on manufacturability and tooling issues. Develop and improve molding techniques and train employees accordingly. Determine cost effective mold designs and resolve mold design issues collaborating with customers and suppliers. Implement Quality Management System protocols for new products. Plan for short and long-term needs of manufacturing and participate in sourcing, purchase and commissioning of necessary equipment for optimization of factory. Qualifications: BS in Engineering or similar technical degree. 3+ years track record leading development of plastic and rubber parts and solving manufacturing problems. Experience in Validation of system. Potential total compensation package to $160,000 with peformance bonus, company paid family doctor, hospitalization, prescription, dental and vision as well as life and disability insurance. Employee assistance programs including tuition reimbursement and more. For complete details contact Christopher Moreno at: ext 264 Or submit resume online at: Or email to: Please reference when responding. Diedre Moire Corporation Education Requirements: Bachelor DegreeMinimum Experience Requirements: 2-5 yearsJob City Location: Bella VistaJob State Location: ARJob Country Location: USASalary Range: $90,000 to $160,000 Diedre Moire Corporation, Inc. WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Plastics Engineer Process Engineer Manufacturing Engineer Plastic Molding Injection Mold Blow Extrusion Tooling Designer Moldmaking Lean Applications Thermoplastics Thermoset DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call
Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Work independently on routine tasks and accept directions on given assignments. Read and interpret equipment manuals and work orders to perform required maintenance and machine servicing. Utilize a solid working knowledge of general safety practices, along with the ability to recognize safety concerns and successfully take the initiative to modify/fix appropriately without direction. Understand basic Hydraulic and Electrical systems along with safety practices. Attention to detail in following standardized preventative maintenance plans on a daily, weekly, monthly, semi-annual, and annual schedule. Able to competently prioritize and address maintenance issues as they arise, and to clearly and accurately complete required documentation for each assignment. Prepare and set-up machinery for scheduled production runs. Provide emergency/unscheduled repairs of production equipment while production is in process and perform routinely scheduled maintenance repairs of production equipment during machine service. Resolve auxiliary equipment issues. Provide appropriate support (as necessary) to Material Handling / Receiving crews. Other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Valid driver's license and a safe driving record are required. Knowledgeable in maintenance equipment. Minimum of 6 months' work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment test to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's "Best Companies to Sell For" list and recognized on Forbes magazine's "Platinum 400 - Best Big Companies" list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws
12/01/2025
Full time
Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Work independently on routine tasks and accept directions on given assignments. Read and interpret equipment manuals and work orders to perform required maintenance and machine servicing. Utilize a solid working knowledge of general safety practices, along with the ability to recognize safety concerns and successfully take the initiative to modify/fix appropriately without direction. Understand basic Hydraulic and Electrical systems along with safety practices. Attention to detail in following standardized preventative maintenance plans on a daily, weekly, monthly, semi-annual, and annual schedule. Able to competently prioritize and address maintenance issues as they arise, and to clearly and accurately complete required documentation for each assignment. Prepare and set-up machinery for scheduled production runs. Provide emergency/unscheduled repairs of production equipment while production is in process and perform routinely scheduled maintenance repairs of production equipment during machine service. Resolve auxiliary equipment issues. Provide appropriate support (as necessary) to Material Handling / Receiving crews. Other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Valid driver's license and a safe driving record are required. Knowledgeable in maintenance equipment. Minimum of 6 months' work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment test to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's "Best Companies to Sell For" list and recognized on Forbes magazine's "Platinum 400 - Best Big Companies" list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws
Principal Manufacturing Project Engineer $140,000 to $160,000 + Paid Relocation assistance + Bonus Hours: 4 days/10hr shift The Opportunity Join a global leader in the aerospace and defense industry as a Principal Project Engineer at our production facility. This is a critical role for an experienced engineer who will act as the Responsible Engineer Authority (REA) , providing expert technical guidance and making high-stakes decisions to ensure the integrity of our hardware. This is a demanding position that requires a deep understanding of complex defense programs and the ability to thrive in a fast-paced manufacturing environment. If you're ready to make a significant impact on real-world production, this is your opportunity. What You'll Do You will serve as the top engineering authority on the production floor, working a 4/10 schedule (four 10-hour days). Your primary focus will be on resolving product non-conformances and optimizing manufacturing processes to ensure quality and efficiency. Key responsibilities include: Real-time Decision-Making: Act as the Responsible Engineer Authority (REA) , with full knowledge and accountability for all design and performance aspects of your assigned programs. You'll make real-time decisions on non-conforming hardware, authorizing immediate actions like rework, repair, or scrap to prevent production delays. Process Optimization: Drive continuous improvement efforts by focusing on process optimization and yield improvement. You will provide technical inputs to minimize waste and maximize resource utilization, helping to integrate technical data packages and update risk management documents. Root Cause Analysis and Resolution: Partner closely with the Quality organization to provide critical technical insights for Root Cause and Corrective Actions (RCCA) (link removed) Your expertise will be essential in identifying the root causes of non-conformances and implementing effective, long-term solutions. Cross-Functional Collaboration: Serve as a technical resource and subject matter expert for a cross-functional team, including design, quality, and manufacturing engineers, to ensure cohesive and efficient problem-solving. Technical Authority: Manage required engineering analysis and provide authoritative technical inputs on all aspects of your assigned programs, ensuring adherence to systems engineering principles and industry standards. What You'll Bring Experience: A Bachelor's Degree in an engineering discipline with a minimum of 9 years of relevant experience , or a Graduate Degree with at least 7 years of experience. Without a degree, a minimum of 13 years of related experience is required. Technical Acumen: Deep knowledge of CAD, GD&T, and materials analysis (link removed) You should have previous experience working with root cause analysis, non-conformances, and designing/testing new processes. Problem-Solving Skills: The ability to quickly assess and make informed decisions on complex problems, ensuring rapid and effective closure. Communication: Exceptional communication skills to effectively represent the engineering team and work collaboratively with diverse cross-functional teams. Security Clearance: The ability to obtain a US Security Clearance is required.
12/01/2025
Principal Manufacturing Project Engineer $140,000 to $160,000 + Paid Relocation assistance + Bonus Hours: 4 days/10hr shift The Opportunity Join a global leader in the aerospace and defense industry as a Principal Project Engineer at our production facility. This is a critical role for an experienced engineer who will act as the Responsible Engineer Authority (REA) , providing expert technical guidance and making high-stakes decisions to ensure the integrity of our hardware. This is a demanding position that requires a deep understanding of complex defense programs and the ability to thrive in a fast-paced manufacturing environment. If you're ready to make a significant impact on real-world production, this is your opportunity. What You'll Do You will serve as the top engineering authority on the production floor, working a 4/10 schedule (four 10-hour days). Your primary focus will be on resolving product non-conformances and optimizing manufacturing processes to ensure quality and efficiency. Key responsibilities include: Real-time Decision-Making: Act as the Responsible Engineer Authority (REA) , with full knowledge and accountability for all design and performance aspects of your assigned programs. You'll make real-time decisions on non-conforming hardware, authorizing immediate actions like rework, repair, or scrap to prevent production delays. Process Optimization: Drive continuous improvement efforts by focusing on process optimization and yield improvement. You will provide technical inputs to minimize waste and maximize resource utilization, helping to integrate technical data packages and update risk management documents. Root Cause Analysis and Resolution: Partner closely with the Quality organization to provide critical technical insights for Root Cause and Corrective Actions (RCCA) (link removed) Your expertise will be essential in identifying the root causes of non-conformances and implementing effective, long-term solutions. Cross-Functional Collaboration: Serve as a technical resource and subject matter expert for a cross-functional team, including design, quality, and manufacturing engineers, to ensure cohesive and efficient problem-solving. Technical Authority: Manage required engineering analysis and provide authoritative technical inputs on all aspects of your assigned programs, ensuring adherence to systems engineering principles and industry standards. What You'll Bring Experience: A Bachelor's Degree in an engineering discipline with a minimum of 9 years of relevant experience , or a Graduate Degree with at least 7 years of experience. Without a degree, a minimum of 13 years of related experience is required. Technical Acumen: Deep knowledge of CAD, GD&T, and materials analysis (link removed) You should have previous experience working with root cause analysis, non-conformances, and designing/testing new processes. Problem-Solving Skills: The ability to quickly assess and make informed decisions on complex problems, ensuring rapid and effective closure. Communication: Exceptional communication skills to effectively represent the engineering team and work collaboratively with diverse cross-functional teams. Security Clearance: The ability to obtain a US Security Clearance is required.
Field Service - HPLC Instruments - Rogers, AR Field Service Metrology Technician Metrologist Analytical Laboratory Instrumentation High Performance Liquid Chromatographs HPLC Ultra-Performance Liquid Chromatographs UPLC _ . Leading supplier of chromatography and spectrometry instrumentation seeks a Field Service Engineer to service equipment and train customers, junior technicians, & distributors on operation and maintenance. Shall: Execute service contract and provide field service repairs and support for company equipment. Troubleshoot, repair, and replace components on Gas Chromatography Mass Spectrometers, High Performance Liquid Chromatographs, Gas Chromatographs, Liquid Chromatography Mass Spectrometers, Ion Spectrometers, TOF Analyzers. Make repairs down to board level. Service analytical instrumentation from companies such as Agilent, Shimadzu, Dionex, Thermo-Fisher, Waters, etc. Educate customers on product superiority, capabilities, maintenance, and operation. Ensure regulatory compliance of equipment performance and operation. Dynamic organization offers an industry competitive compensation package, tuition reimbursement, bonuses, uncapped commissions, full medical benefits, 401(k) retirement plan, car allowance, company laptop, cell phone, generous vacation time, numerous career development opportunities, and more! For complete details contact Christopher Moreno at: ext 264 Or submit resume online at: Or email to: Please reference when responding. Diedre Moire Corporation Education Requirements: Associate DegreeMinimum Experience Requirements: 2-5 yearsJob City Location: SurpriseJob State Location: ARJob Country Location: USASalary Range: $80,000 to $120,000 Diedre Moire Corporation, Inc. WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Field Service Technician Mechanic Automated Candy & Protein Bar Food Packaging Lines Maintenance Repair Installation Machinery Flow Wrappers Pouchers PLCs HMIs Servos Motion Controls Hydraulics Pneumatics DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call .
12/01/2025
Full time
Field Service - HPLC Instruments - Rogers, AR Field Service Metrology Technician Metrologist Analytical Laboratory Instrumentation High Performance Liquid Chromatographs HPLC Ultra-Performance Liquid Chromatographs UPLC _ . Leading supplier of chromatography and spectrometry instrumentation seeks a Field Service Engineer to service equipment and train customers, junior technicians, & distributors on operation and maintenance. Shall: Execute service contract and provide field service repairs and support for company equipment. Troubleshoot, repair, and replace components on Gas Chromatography Mass Spectrometers, High Performance Liquid Chromatographs, Gas Chromatographs, Liquid Chromatography Mass Spectrometers, Ion Spectrometers, TOF Analyzers. Make repairs down to board level. Service analytical instrumentation from companies such as Agilent, Shimadzu, Dionex, Thermo-Fisher, Waters, etc. Educate customers on product superiority, capabilities, maintenance, and operation. Ensure regulatory compliance of equipment performance and operation. Dynamic organization offers an industry competitive compensation package, tuition reimbursement, bonuses, uncapped commissions, full medical benefits, 401(k) retirement plan, car allowance, company laptop, cell phone, generous vacation time, numerous career development opportunities, and more! For complete details contact Christopher Moreno at: ext 264 Or submit resume online at: Or email to: Please reference when responding. Diedre Moire Corporation Education Requirements: Associate DegreeMinimum Experience Requirements: 2-5 yearsJob City Location: SurpriseJob State Location: ARJob Country Location: USASalary Range: $80,000 to $120,000 Diedre Moire Corporation, Inc. WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Field Service Technician Mechanic Automated Candy & Protein Bar Food Packaging Lines Maintenance Repair Installation Machinery Flow Wrappers Pouchers PLCs HMIs Servos Motion Controls Hydraulics Pneumatics DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call .
Field Service Engineer - Spectrometers & Chromatographs - Conway, AR Metrologist Maintenance Calibration Technician Metrology Analytical Laboratory Instrumentation Validation Chromatography Mass Spectrometry HPLC UPLC GC MS GC/MS Chemistry Analyzers _ . Repair, maintain, troubleshoot, install, and calibrate High Performance Liquid Chromatographs, Gas Chromatography Mass Spectrometers, Liquid Chromatography Mass Spectrometers, Atomic Absorption Spectrometers, and similar analytical instrumentation. Conduct pre-commissioning activities including system checkout, instrumentation calibration, loop checks, and communication testing. Operate test apparatus during test cycle to produce, regulate, and record effects of actual or simulated conditions. Perform preventative maintenance. Serve as voice of customer and liaise feedback to product development teams. Maintain tool and parts inventory. Escalate complex issues to senior Service Engineers. High growth potential opportunity comes with a competitive compensation package, full medical and disability benefits, bonuses, commissions, 401(k) savings plan, paid training, generous paid time off, company vehicle, and more! For complete details contact Christopher Moreno at: ext 264 Or submit resume online at: Or email to: Please reference when responding. Diedre Moire Corporation Education Requirements: Associate DegreeMinimum Experience Requirements: 2-5 yearsJob City Location: ConwayJob State Location: ARJob Country Location: USASalary Range: $80,000 to $120,000 Diedre Moire Corporation, Inc. WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Field Service Technician Mechanic Automated Candy & Protein Bar Food Packaging Lines Maintenance Repair Installation Machinery Flow Wrappers Pouchers PLCs HMIs Servos Motion Controls Hydraulics Pneumatics DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call
12/01/2025
Full time
Field Service Engineer - Spectrometers & Chromatographs - Conway, AR Metrologist Maintenance Calibration Technician Metrology Analytical Laboratory Instrumentation Validation Chromatography Mass Spectrometry HPLC UPLC GC MS GC/MS Chemistry Analyzers _ . Repair, maintain, troubleshoot, install, and calibrate High Performance Liquid Chromatographs, Gas Chromatography Mass Spectrometers, Liquid Chromatography Mass Spectrometers, Atomic Absorption Spectrometers, and similar analytical instrumentation. Conduct pre-commissioning activities including system checkout, instrumentation calibration, loop checks, and communication testing. Operate test apparatus during test cycle to produce, regulate, and record effects of actual or simulated conditions. Perform preventative maintenance. Serve as voice of customer and liaise feedback to product development teams. Maintain tool and parts inventory. Escalate complex issues to senior Service Engineers. High growth potential opportunity comes with a competitive compensation package, full medical and disability benefits, bonuses, commissions, 401(k) savings plan, paid training, generous paid time off, company vehicle, and more! For complete details contact Christopher Moreno at: ext 264 Or submit resume online at: Or email to: Please reference when responding. Diedre Moire Corporation Education Requirements: Associate DegreeMinimum Experience Requirements: 2-5 yearsJob City Location: ConwayJob State Location: ARJob Country Location: USASalary Range: $80,000 to $120,000 Diedre Moire Corporation, Inc. WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Field Service Technician Mechanic Automated Candy & Protein Bar Food Packaging Lines Maintenance Repair Installation Machinery Flow Wrappers Pouchers PLCs HMIs Servos Motion Controls Hydraulics Pneumatics DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call
PLEASE NOTE: This position is not eligible for sponsorship or work authorization. Therefore, if you require sponsorship to work in the United States we cannot consider your application at this time. Service medical laboratory equipment (hematology, chemistry, coagulation, etc) for this manufacturer of medical laboratory analyzers. Current or recent Field Service experience in the Medical Device industry is strongly preferred. You will be servicing automated robotic lab instrumentation in the greater Little Rock, AR area. Position requires a good electronics & electro-mechanical troubleshooting backgrounnd. No Relocation, LITTLE ROCK, AR area only Questions (YES or NO answers only please) : Do you have at least 3 yrs of current or recent Field Service Experience?: Do you have experience servicing electronics?: Do you have experience servicing electro-mechanical equipment?: Can you do overnight travel?: Qualifications: A Certificate or AAS Degree in electronics or a related discipline is required. Good experience with electronics & electro-mechanical troubleshooting. Overnight travel will be required Minimum of 3 years experience as a field service engineer Experience servicing medical lab analyzers or other medical instrumentation would be a plus (but not required). This job requires the individual to be fully vaccinated against COVID-19. Responsibilities: Will be involved with the installation, servicing, and preventive maintenance of the instrumentation. Establish a good customer relations foundation. Coordinates problem resolution within the Field Support Group Maintain car inventory, such as tools, trunk stock (parts), etc. Provides basic on-site training regarding the operation of company instrumentation (link removed)> Benefits: Base salary 68K - 85K depending on experience (overtime & performance bonus should add an additional 5K - 10K annually, probably more.). Company vehicle Laptop, Cellphone Fully paid family medical Dental Life Insurance 401K Vacation, PTO, and paid holidays Tuition Reimbursement Annual bonus
12/01/2025
PLEASE NOTE: This position is not eligible for sponsorship or work authorization. Therefore, if you require sponsorship to work in the United States we cannot consider your application at this time. Service medical laboratory equipment (hematology, chemistry, coagulation, etc) for this manufacturer of medical laboratory analyzers. Current or recent Field Service experience in the Medical Device industry is strongly preferred. You will be servicing automated robotic lab instrumentation in the greater Little Rock, AR area. Position requires a good electronics & electro-mechanical troubleshooting backgrounnd. No Relocation, LITTLE ROCK, AR area only Questions (YES or NO answers only please) : Do you have at least 3 yrs of current or recent Field Service Experience?: Do you have experience servicing electronics?: Do you have experience servicing electro-mechanical equipment?: Can you do overnight travel?: Qualifications: A Certificate or AAS Degree in electronics or a related discipline is required. Good experience with electronics & electro-mechanical troubleshooting. Overnight travel will be required Minimum of 3 years experience as a field service engineer Experience servicing medical lab analyzers or other medical instrumentation would be a plus (but not required). This job requires the individual to be fully vaccinated against COVID-19. Responsibilities: Will be involved with the installation, servicing, and preventive maintenance of the instrumentation. Establish a good customer relations foundation. Coordinates problem resolution within the Field Support Group Maintain car inventory, such as tools, trunk stock (parts), etc. Provides basic on-site training regarding the operation of company instrumentation (link removed)> Benefits: Base salary 68K - 85K depending on experience (overtime & performance bonus should add an additional 5K - 10K annually, probably more.). Company vehicle Laptop, Cellphone Fully paid family medical Dental Life Insurance 401K Vacation, PTO, and paid holidays Tuition Reimbursement Annual bonus
