21 jobs found in Texas

Part Time Engineering Design Instructor Wharton County Junior College Salary: See Position Description Job Type: Faculty Part Time Job Number: 2202 F 012 Location: Wharton, TX Department: Vocational Instruction's Area Closing: Continuous General Description Positions available on the WCJC Wharton Campuses teaching day classes. Pay for 3 semester college hours is $2,800 and pay for 4 semester college hours is $3,150. The permanent responsibility of a faculty member is to provide the most effective instruction possible in his/her discipline. Supervision is received from appropriate supervisor. The faculty member works to insure that his/her instruction is meeting the educational needs of students. Requirements This position requires an Associate's Degree in Engineering Design or closely related field and 36 months of full time work experience in the field. (Drafting work experience is required to qualify for this position.) A criminal background check is also required. To be considered for this position, all qualified applicants must attach to their online application the following documents: 1) Copy of college transcript(s) showing completion of at least an associate's degree in engineering design or closely related field 2) Curriculum Vitae/Resume outlining work in engineering design or closely related field and/or teaching experience All documents must be attached to one online application to be considered. Please re-open your application form to verify all documents are properly attached. To apply, please visit jeid-29b65cb499eed0aa69 Copyright 2025 Inc. All rights reserved. Posted by the FREE value-added recruitment advertising agency

Part Time Electronics Engineering Technology Instructor Wharton County Junior College Salary: See Position Description Job Type: Faculty Part Time Job Number: 2306 F 030 Location: WCJC Wharton and Bay City Campuses, TX Department: Vocational Instruction's Area Closing: General Description Day positions available on the Wharton or Bay City campus. Pay range for this position is $2,400 - $3,600 per 3 hour credit course per semester, depending on section. The permanent responsibility of a faculty member is to provide the most effective instruction possible in his/her discipline. Supervision is received from appropriate supervisor. The faculty member works to insure that his/her instruction is meeting the educational needs of students. Full job description can be viewed by clicking this link and searching the job title. Requirements This position requires an Associate's degree in Electronics Engineering Technology or closely related field and 36 months of full time work experience. A criminal background check is also required. To be considered for this position, all qualified applicants must attach to their online application the following documents: Copies of college/university transcript(s) reflecting, at a minimum, an associate's degree in Electronics Engineering Technology or closely related field Resume or CV outlining work and/or teaching experience in the electrical engineering or closely related field All documents must be attached to one online application to be considered. Please re-open your application form to verify all documents are properly attached. To apply, please visit jeid-3f298dc6bad9d94fb1db69e3cc354cdd Copyright 2025 Inc. All rights reserved. Posted by the FREE value-added recruitment advertising agency

JLL empowers you to shape a brighter way. Our people at JLL and JLL Technologies are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether youve got deep experience in commercial real estate, skilled trades or technology, or youre looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Sign-On Bonus Details: Sign-on bonuses available for qualified candidates based on experience and expertise. Bonus eligibility and amounts are determined during the final stages of the interview process and may vary by candidate. Location Requirement: Successful candidates must establish residency in or near Abilene, TX to fulfill the in-person requirements of this position. Data Center Building Engineer What this job involves The Data Center Operations Engineer isresponsible for delivery of best practice systems and problem resolution on all data center electrical and mechanical infrastructure(UPS, MV electrical systems, generators, cooling systems etc.) What is your day to day? Responsible for maintaining, monitoring, and performing preventive maintenance and continuous operation of all building systems to maintain 100% Up-time including: fire/life safety, mechanical systems such as (HVAC, chillers, crac, crah, plumbing, controls), electrical including emergency backup systems such as (lighting, UPS, ATS, STS, PDU, generators, primary switchgear, power distribution, transformers), and hot water systems. Monitors operation, adjusts, and maintains refrigeration, chilled water, and air conditioning equipment; boilers, and ventilating and water heaters; pumps, valves, piping, and filters; other mechanical and electrical equipment. Must record readings and make and adjust where necessary to ensure proper operation of equipment. Requires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action as required. Comply with departmental policy for the safe storage, usage, and disposal of hazardous materials.Maintains a clean and safe workplace. Learn and understand the data center site in-order to manage incidents and events that put the critical systems at risk. Work order management, including CMMS, Vendor Management, and Customer Facing Tickets. Understanding and complying with emergency escalation procedures. Perform additional job duties as required. Physical Work Abilities & Requirements: This position requires frequent walking, climbing, bending, kneeling, lifting, stooping, and working/extending overhead, including: Walking large, campus-like settings. Lifting a minimum of 50 lbs. Climbing stairs and navigating rooftops to access equipment. Using ladders up to 30 ft and working from heights. Ability to Climb a ladder with a 300-lb weight limit. Must be able to work different schedules. Must be able to work Holidays. Must be able to respond to site emergencies. Desired experience and technical skills Required 2+ years experience working in a data center/critical facility. Experience with building systems, including: UPS systems, emergency generators, and switchgears. Demonstrated verbal/written communication skills. Working knowledge of computer applications including MS Office (Word, Excel, Outlook), Google Suite and CMMS. Preferred Corrigo experience Universal EPA 608 certification Trained in NFPA70E This position does not provide visa sponsorship. Candidates must be authorized to work in the United States without employer sponsorship. Location: On-site Abilene, TX Job Tags: Building Automation Systems, Computerized Maintenance Management Systems (CMMS) If this job description resonates with you, we encourage you to apply, even if you dont meet all the requirements. Were interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: 401(k) plan with matching company contributions Comprehensive Medical, Dental & Vision Care Paid parental leave at 100% of salary Paid Time Off and Company Holidays Early access to earned wages through Daily Pay At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you'repursuing. JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLLs recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our Candidate Privacy Statement . For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy here . Jones Lang LaSalle (JLL) is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process including the online application and/or overall selection process you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our Contact Us page > I want to work for JLL. Accepting applications on an ongoing basis until candidate identified.

We are seeking a full-time contractor or employee for a Senior RPA Engineer role.Responsibilities: Collaborate with business stakeholders and process owners to identify automation opportunities and define requirements. Responsible for all aspects of RPA including, discovery, solution design/scope, development, testing, implementation and monitoring in production/support. Monitor RPA scripts, improving performance of such scripts through programming changes or configuration. Lead the development and maintenance of automated workflows, ensuring scalability, reliability, and efficiency. Conduct thorough testing and debugging of RPA processes to ensure accuracy and robustness. Required Skills: Hands-on experience with RPA development, with specifically using Blue Prism Hands-on experience with SQL/No-SQL databases Experience with RESTful web services Preferred Skills: Proficiency in programming languages such as C#, Java, or Python Experience with process discovery, requirements gathering, and solution architecture Experience with web development including HTML, JavaScript, DOM, and HTTP protocol Experience with JDBC API development Experience with Microsoft Azure infrastructure, including QA and troubleshooting

Please check below skills and share accordingly: Overall 13+ year experience required Must look for AI/ML Engineers hands on engineers who design, develop, and implement not a solution architects, we need hands on Engineers. Must they should have handled data from snowflake Must - Familiar with Snowflake Medallion Architecture, the panel can prep him additionally 2 yrs Gen-AI experience - You will use your expertise to create and scale innovative GenAI solutions, including chatbot development. Proficiency in programming languages like Python, R, or Scala, and experience with ML frameworks such as TensorFlow, PyTorch, Keras. About the Role As a Generative AI (GenAI) Senior Engineer, you will lead the design, development, and delivery of innovative AI and analytics solutions that drive real-world transformation for our clients. In this role, you will leverage your expertise to build and scale disruptive GenAI applications that unlock business value and deliver measurable outcomes. You will work closely with cross-functional teamsincluding data science, engineering, product, and business stakeholdersto ensure your solutions are robust, responsible, and production-ready. Additionally, you will play a key role in shaping go-to-market strategies and advancing our AI solution portfolio. What You'll Be Doing: Delivery: Own the AI delivery aspects as per the clients AI objectives. Innovation & Demonstration: Proactively identify value-driven use cases and apply them throughout the customers journey with Trianz. Solution Design & Delivery: Design and deliver industry-best, responsible AI solutions using AWS and/or Azure Gen AI and ML Services using data from Snowflake and other sources. Client Engagement: Regular collaboration and partnership with clients to understand their challenges and needs and respond with responsible AI solutions that transform and drive value. Lead and support proposal development. Creativity: Be an out-of-the-box thinker and passionate about applying your skills to new and existing solutions alike while always demonstrating a customer-first mentality. Why Join Us: Be part of a rapidly rising, global technology innovator whose platforms and services are engaged by Fortune 1000 companies and industry leaders such as Microsoft & Amazon. Immerse yourself in a culture where creativity is celebrated and encouraged. Engage in thrilling projects and opportunities for your professional growth. Contribute to our quest to redefine the industry. Competitive compensation and benefits with occasional distinctive benefits that set us apart. Who you are: 13+ years hands-on data solution architecture and implementation experience on AI (link removed) At least 7+ years of experience in advanced analytics, AI, or data science roles, with a proven track record of leading and delivering large-scale AI/ML solutions preferably in AWS and Azure. 5+ years of experience, working with cross-functional teams, data scientists, and project delivery. 2+ years of Experience with Gen AI Solutions and building data-driven solutions within large organizations. 2+ years of Experience in handling data from Snowflake and other data sources to build AI solutions. Strong understanding and hands-on experience with AI/ML algorithms, deep learning, MLOps and data analytic technology and techniques. Proficiency in programming languages like Python, R, or Scala, and experience with ML frameworks such as TensorFlow, PyTorch, Keras. Competency in delivering AI-solutions to cloud platforms like AWS, Azure, or GCP using native and 3rd party services and technologies. Demonstrated AI marketplace knowledge and applicability. Collaboration and management experience with technology partners (e.g., AWS, Azure, Google Cloud) to develop joint solutions. Practical understanding and experience related to data governance, privacy laws (e.g., GDPR, CCPA), and ethical AI practices. Experience ensuring regulatory compliance and implementing governance frameworks in AI & analytic solutions.

OPENINGS: 4 Title: Architectural Project Architect JOB TYPE: Direct Hire LOCATION: Austin, Texas, United States Frisco, Texas, United States Lubbock, Texas, United States Midland, Texas, United States INDUSTRY: SALARY: $60,000.00 - $95,000.00 / year CATEGORY: EDUCATION: Bachelor's Degree EXPERIENCE: 5-7 years TRAVEL: Sometimes RELOCATION ASSISTANCE: Yes - Nationwide relocation offered WORK ELIGIBILITY: US Citizen JOB DESCRIPTION Architectural Project Architect (Lubbock, Frisco, Midland, Austin, TX) RESPONSIBILITIES The architect's duties will include being an active team member developing projects in their entirety, beginning with programming/conceptual design through the completion of construction administration. Specific task will include preparing project construction documents; communicating with and coordinating with consultants, contractors, owners and team members; documenting code review and compliance; reviewing shop drawings, project submittals, etc. for document compliance. QUALIFICATIONS Registered Architect with 5+ years of experience post licensure. High energy, confident, and goal oriented. A passion for creative design. Ability to collaborate closely with team members inside and outside the office. Proficient in Revit Architecture, Microsoft Word and Excel, Bluebeam, and Sketchup. Desire to continue developing and grow career and firm. BENEFITS Medical, Dental, Vision, 401-K, Vacation Time, Holidays paid off

Powell is a dynamic and innovative company that values collaboration, technical excellence, and professional growth. As an Electrical Engineer, you will elevate your career and make a significant impact by leading projects that craft cutting-edge solutions for diverse clients. At Powell, an Electrical Engineer holding a minimum of a bachelor's degree in electrical engineering, or a related engineering discipline with a focus on power, will be the "technical face" on projects from concept to completion. You will be working with clients to design custom Low and Medium Voltage Switchgear & Control Solutions to meet their technical specifications and quality standards within the constraints of the budget and the schedule. Additionally, an Electrical Engineer will learn industry standards and trends. Finally, you will join a team that fosters a supportive environment, continuous learning and development where your expertise will not only be appreciated but recognized and rewarded. Essential Responsibilities Design standard jobs with guidance to match client specifications and requirements Draft electrical construction drawings using AutoCAD in conjunction with our in-house mechanical and wiring teams Gain design knowledge to engineer 480V through 5kv Motor Control, and 480V through 38kV Switchgear along with other miscellaneous equipment Work with your Supervisor and the Project Management team to help interpret project write-ups, client specifications, drawings, and other correspondence during the life of the project Create and validate Bills of Materials for client submittal and approval per Powell Standards Complete self-design reviews to verify accuracy and completeness of designs before issuing projects to Powell's manufacturing floor for construction Gain the ability to provide technical support in client meetings Coordinate with purchasing and suppliers to specify & approve component parts and assemblies Provide prompt notification to supervisor and project management for issues that impact scope, budget, and schedule Coordinate with the electrical design team, and the mechanical engineering team for the final design and construction package to include wiring diagrams, one-line diagrams, three-line diagrams, control schemes, and mechanical layouts of the project Create AC and DC schematics, door component layouts, wiring diagrams, and one-line diagrams for project approval, construction and As-Built's drawing submittals Provide technical support as necessary for sales, application engineering, and inspection teams throughout the life of the project Assist fellow production engineers in solving problems on a daily basis Adhere to Powell's policies and procedures, work instructions, ISO policies, Safety Rules and Regulations Meet regularly with clients, suppliers and OEMs Required Experience Is Proportionate With the Selected Job Level The Engineer level requires a Bachelor's degree in an engineering discipline and 0-3 years of relevant job related experience The Senior Engineer level requires a Bachelor's degree in an engineering discipline and 4-8 years of relevant job related experience The Lead Engineer level requires Bachelor's degree in an engineering discipline and 7-10 years of relevant job related experience Minimum Qualifications BS Degree in Electrical Engineering, Electrical Technology or related area Minimum 1-3 years of experience in an Engineering role Ability to draft in AutoCAD Proficient with electrical design and circuitry Basic understanding of power system and relay applications as applied to products Preferred Qualifications Master's degree in Electrical Engineering preferred Skills, Abilities & Other Requirements Ability to manage & prioritize multiple projects, schedules and budgets in a fast-paced environment Solid organization, communication, presentation and planning skills Ability to carry out engineering development types of tasks and address production issues Demonstrated ability to work collaboratively with others in a cross-functional team environment Strong problem-solving skills, and the ability to troubleshoot system-level problems Basic understanding of one-line and three-line drawings, control schematics, and point to point wiring diagrams Basic understanding to being very proficient with power distribution equipment (three phase systems, relays, transformers, control switches, etc.) Basic knowledge of 480V through 38kV electrical distribution and switchgear operation Able to apply applicable sections of the National Electric Code and other codes and standards such as IEEE, ANSI and UL in day-to-day activities Able to form and apply cost competitive techniques to develop the most cost-effective solution for the engineered to order product Possess a strong customer service commitment Basic understanding to being very proficient at drawing reviews (i.e., acquired knowledge of specification items that Powell should take exception to and specification items that require special attention; able to accurately interpret client specifications, etc.) Working & Environmental Conditions The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally there may be some work performed in the field with exposure to construction sites or active customer facilities. It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

A Senior Electrical Engineer is responsible for designing, developing, and testing electrical systems and equipment. They oversee projects, provide technical expertise, and ensure compliance with industry standards and regulations. They may also collaborate with other engineers and professionals to solve complex electrical problems, conduct research, and implement innovative solutions. A Senior Electrical Engineer typically has extensive experience in electrical engineering and may supervise and mentor junior engineers in their team. Essential Responsibilities Independently complete standard projects to match client specifications and requirements Draft electrical construction drawings using AutoCAD in conjunction with our in-house mechanical and wiring teams Apply design knowledge to engineer 480V through 5kv Motor Control, and 480V through 38kV Switchgear along with other miscellaneous equipment Work with the Project Management team to help interpret project write-ups, client specifications, drawings, and other correspondence during the life of the project Create and validate Bills of Materials for client submittal and approval Complete self and peer design reviews to verify accuracy and completeness of designs before issuing projects to Powell's manufacturing floor for construction Mentor junior engineers in their team Provide technical support in client meetings Coordinate with purchasing and suppliers to specify & approve component parts and assemblies Provide prompt notification to supervisor and project management for issues that impact scope, budget, and schedule Coordinate with the electrical design team, and the mechanical engineering team for the final design and construction package to include wiring diagrams, one-line diagrams, three-line diagrams, control schemes, and mechanical layouts of the project Create AC and DC schematics, door component layouts, wiring diagrams, and one-line diagrams for project approval, construction and As-Built's drawing submittals Provide technical support as necessary for sales, application engineering, and inspection teams throughout the life of the project Assist fellow production engineers in solving problems on a daily basis Adhere to Powell's policies and procedures, work instructions, ISO policies, Safety Rules and Regulations Meet regularly with clients, suppliers and OEMs Required Experience Is Proportionate With the Selected Job Level The Engineer level requires a Bachelor's degree in an engineering discipline and 0-3 years of relevant job related experience The Senior Engineer level requires a Bachelor's degree in an engineering discipline and 4-8 years of relevant job related experience The Lead Engineer level requires Bachelor's degree in an engineering discipline and 7-10 years of relevant job related experience Minimum Qualifications BS Degree in Electrical Engineering, Electrical Technology or related area Minimum 4-8 years of experience in an Engineering role Advanced drafting/ACAD skills Proficient in electrical SWGR design and control schemes. Proficient in understanding power systems and relay applications as applied to switchgear products Skills, Abilities & Other Requirements Ability to manage & prioritize multiple projects, schedules and budgets in a fast-paced environment Solid organization, communication, presentation and planning skills Experience in carrying out engineering development types of tasks and addressing production issues Demonstrated ability to work collaboratively with others in a cross-functional team environment Highly self-motivated in working on "first-of-its-kind" projects that require resilience and tenacity Strong problem-solving skills, and the ability to troubleshoot complex system-level problems Solid understanding of one-line and three-line drawings, control schematics, and point to point wiring diagrams Familiarity with power distribution equipment (three phase systems, relays, transformers, control switches, etc.) Good understanding of 480V through 38kV electrical distribution and switchgear operation Familiar with applicable sections of the National Electric Code and other codes and standards such as IEEE, ANSI and UL Able to form and apply cost competitive techniques to develop the most cost-effective solution for the engineered to order product Possess a strong customer service commitment Proficient at project specification and drawing reviews (i.e., acquired knowledge of specification items that Powell should take exception to and specification items that require special attention; able to accurately interpret client specifications, etc.) Working Conditions The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally, there may be some work performed in the field with exposure to construction sites or active customer facilities. It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

A Senior Electrical Engineer is responsible for designing, developing, and testing electrical systems and equipment. They oversee projects, provide technical expertise, and ensure compliance with industry standards and regulations. They may also collaborate with other engineers and professionals to solve complex electrical problems, conduct research, and implement innovative solutions. A Senior Electrical Engineer typically has extensive experience in electrical engineering and may supervise and mentor junior engineers in their team. Essential Responsibilities Independently complete standard projects to match client specifications and requirements Draft electrical construction drawings using AutoCAD in conjunction with our in-house mechanical and wiring teams Apply design knowledge to engineer 480V through 5kv Motor Control, and 480V through 38kV Switchgear along with other miscellaneous equipment Work with the Project Management team to help interpret project write-ups, client specifications, drawings, and other correspondence during the life of the project Create and validate Bills of Materials for client submittal and approval Complete self and peer design reviews to verify accuracy and completeness of designs before issuing projects to Powell's manufacturing floor for construction Mentor junior engineers in their team Provide technical support in client meetings Coordinate with purchasing and suppliers to specify & approve component parts and assemblies Provide prompt notification to supervisor and project management for issues that impact scope, budget, and schedule Coordinate with the electrical design team, and the mechanical engineering team for the final design and construction package to include wiring diagrams, one-line diagrams, three-line diagrams, control schemes, and mechanical layouts of the project Create AC and DC schematics, door component layouts, wiring diagrams, and one-line diagrams for project approval, construction and As-Built's drawing submittals Provide technical support as necessary for sales, application engineering, and inspection teams throughout the life of the project Assist fellow production engineers in solving problems on a daily basis Adhere to Powell's policies and procedures, work instructions, ISO policies, Safety Rules and Regulations Meet regularly with clients, suppliers and OEMs Required Experience Is Proportionate With the Selected Job Level The Engineer level requires a Bachelor's degree in an engineering discipline and 0-3 years of relevant job related experience The Senior Engineer level requires a Bachelor's degree in an engineering discipline and 4-8 years of relevant job related experience The Lead Engineer level requires Bachelor's degree in an engineering discipline and 7-10 years of relevant job related experience Minimum Qualifications BS Degree in Electrical Engineering, Electrical Technology or related area Minimum 4-8 years of experience in an Engineering role Advanced drafting/ACAD skills Proficient in electrical SWGR design and control schemes. Proficient in understanding power systems and relay applications as applied to switchgear products Skills, Abilities & Other Requirements Ability to manage & prioritize multiple projects, schedules and budgets in a fast-paced environment Solid organization, communication, presentation and planning skills Experience in carrying out engineering development types of tasks and addressing production issues Demonstrated ability to work collaboratively with others in a cross-functional team environment Highly self-motivated in working on "first-of-its-kind" projects that require resilience and tenacity Strong problem-solving skills, and the ability to troubleshoot complex system-level problems Solid understanding of one-line and three-line drawings, control schematics, and point to point wiring diagrams Familiarity with power distribution equipment (three phase systems, relays, transformers, control switches, etc.) Good understanding of 480V through 38kV electrical distribution and switchgear operation Familiar with applicable sections of the National Electric Code and other codes and standards such as IEEE, ANSI and UL Able to form and apply cost competitive techniques to develop the most cost-effective solution for the engineered to order product Possess a strong customer service commitment Proficient at project specification and drawing reviews (i.e., acquired knowledge of specification items that Powell should take exception to and specification items that require special attention; able to accurately interpret client specifications, etc.) Working Conditions The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally, there may be some work performed in the field with exposure to construction sites or active customer facilities. It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Powell is hiring a Senior Manufacturing Engineer in Southeast Houston! Our Manufacturing Engineers are the process owners that design and improve processes and procedures used for the manufacturing of Powell engineered to order products. This position is required to identify and implement processes that improve the safety, quality, and operating efficiency in a manner that supports the objectives of the Business Unit. Posted position does not allow for sponsorship or relocation assistance. Position Summary • Evaluates manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators. • Develops manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; conferring with equipment vendors. • Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. • Assures product and process quality by designing testing methods; testing finished- product and process capabilities; establishing standards; confirming manufacturing processes. • Provides manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements. • Prepares product and process reports by collecting, analyzing, and summarizing information and trends. • Provides manufacturing engineering information by answering questions and requests. • Maintains product and company reputation by complying with government regulations. • Keeps equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; requesting special service. • Maintains product and process data base by writing computer programs, entering data. • Completes design and development projects by training and guiding technicians. • Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies. • Contributes to team effort by accomplishing related results as needed. Job Requirements • BS Degree in Manufacturing or Industrial Engineering. • Minimum 3-5 years of experience in a Manufacturing Engineer role. • Demonstrated proficiency with computer skills using Oracle and MS Office Suite. • Demonstrated success with specifying, implementing, and manufacturing equipment. • Demonstrated mechanical aptitude. • Advanced knowledge using drafting/CAD skills with the ability to create and modify Factory Layouts. • Knowledge of ISO 9001 Quality System. • Experience with either the Toyota Production System or Lean Manufacturing. • Project Management experience, leading multi-disciplined teams. • Proven track record of completing process improvements from conception through final implementation and ramp-up. • Familiar with statistical test procedures and corrective action techniques. • Excellent mechanical and electrical systems aptitude. Understanding of pneumatic, hydraulic, and servo positioning systems, as well as, and machine controls. • Project involvement and organizational skills to handle multiple priorities. • Demonstrated written and verbal communication skills. • Demonstrated simple analytical and problem-solving ability. • Ability to implementing designs and solutions. • Able to follow directed instruction. • Able to lead change and respond to tactical changes. • Able to prioritize and manage time effectively. (Self-motivated and self-managing). • Attend in house and outside training sessions. • Learn policies and procedures, work instruction, ISO policies, Safety Rules and Regulations, and vendor products. In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

A Snapshot of Your Day The day-to-day life of a Field Service Engineer specializing in digital metrology can be very diverse. One day, you may be at a client site performing a blue light laser scan of critical dimensions on a centrifugal compressor casing, followed by utilizing specialty software to build a digital assembly of the service casing with a new revamp rotor. On other days, you might provide remote analysis or collaborate with the project management team on a future outage that requires a laser tracker to assist with equipment alignment. This role demands the ability to multi-task effectively across various topics, often necessitating quick responses to ensure that field activities proceed without delay. The Field Engineer needs to be able to transition between tasks quickly and efficiently, sometimes with short notice. This position is an exciting opportunity for individuals who thrive on challenges and enjoy a fast-paced work environment. How You'll Make an Impact This function includes a broad range of engineering activities which encompasses Centrifugal and Reciprocating Compressors Field Engineer is responsible for the execution of advanced field service digital metrology supporting field service execution teams, troubleshooting customer issues, and assisting with project planning. The Field Engineer will be using laser trackers, blue light laser scanners, terrestrial scanners, and supporting software suites to collect critical dimensions supporting field service and repair execution. Strong problem-solving skills are a must. Provide remote technical assistance and support for Siemens Energy digital metrology activities. Assist with creation and updating of digital metrology work procedures. Ability to read and interpret P&ID's and machine drawings Previous work experience in a refinery or chemical plant environment a plus Field Engineer must be comfortable with direct client interaction, being able to communicate progress, schedules, and open items with client; prepare detailed technical reports. What You Bring 3+ years of working experience with digital metrology tools such as laser scanners and laser trackers is required. Experience with Polyworks Metrology Suite, Creaform OS, VX Elements, FARO Scene, or similar is preferred. Must be proficient in Windows and Office . BS in Mechanical, Industrial, Thermo, Aero or Electrical Engineering fields is preferred. Experience with centrifugal/turbo compressors, reciprocating compressors, and steam turbines is preferred. Must be willing and able to travel 50% of the time. Must hold valid driver's license and either holds or is able to obtain a passport and TWIC card. Ability to complete offshore survival training if requested. Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. About the Team Transformation of Industry Our Transformation of Industry division is decarbonizing the industrial sector. Increasing electrification and efficiency are key, and demand for green H2 and derivative fuels will rise. We enable the decarbonization of the industrial sector and the transition to sustainable processes, building on a strong industrial customer base, a global network, diverse technologies, and integrated execution capabilities. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With 100,000 dedicated employees in more than 90 countries, we develop energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one-sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards Career growth and development opportunities Supportive work culture Company-paid health and wellness benefits Paid Time Off and paid holidays 401K savings plan with company match Family building benefits Parental leave

A Snapshot of Your Day The Repair Engineer is a thorough, dedicated and technical customer facing individual, who is focused on developing unique repair solutions of engineered-to-order turbomachinery using industry standards and Siemens Energy developed repair standards. The objective is to ensure reliability, availability and efficiency of the equipment while prioritizing safety and quality to return the unit back to operating condition. How You'll Make an Impact Develop work instructions, repair shop routers, inspection packages and quality plans. Establish guidelines to provide engineering assessment and disposition for compromised equipment whist coordinating with experts to develop accurate repair dispositions. Collaborate with production supervisors and leadsman to ensure specifications and procedures are adhered to during each project phase. Support the resolution of customer technical issues to provide effective solutions within acceptable schedule requirements. Contribute to digitalization efforts to enhance shop operations (digital inspection programs i.e. 3-D scanning). Develop accurate reports and organizing engineering records to update fleet data. What You Bring Bachelor's degree in mechanical engineering (or equivalent field) with a minimum of 3 years of working experience in the oil & gas or power generation service industry is preferred. Possess fundamental knowledge of turbomachinery theory and thorough understanding of standard repair principles. Familiar with machining and mechanic operations including industry standards (ASME & API). Strong analytical skills and ability to be agile/resourceful with a keen attention to detail. Excellent communication, interpersonal ability and technical writing skills. Flexibility to adapt to changing priorities and work in a dynamic environment. Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. About the Team Transformation of Industry Our Transformation of Industry division is decarbonizing the industrial sector. Increasing electrification and efficiency are key and demand for green H2 and derivative fuels will rise. We enable decarbonization of the industrial sector and the transition to sustainable processes, building on a strong industrial customer base, a global network, diverse technologies, and integrated execution capabilities. There are regional repair engineers at our major service centers around North America. The group has a range of repair expertise within the oil and gas industry, specific turbomachinery. The network and collaboration will provide the adequate framework to ensure successful technical support at each of these locations. In our Industrial Applications division, we offer comprehensive digital portfolio solutions in the oil and gas sector and other process industries comprising rotating equipment, electrification, and solutions for the Subsea business. Our customers are supported with sustainable and mission-critical products, solutions, and services. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. We meet the growing energy demand across 90+ countries while ensuring our climate is protected. With more than 94,000 dedicated employees, we not only generate electricity for over 16% of the global community, but we're also using our technology to help protect people and the environment. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Check out this video to learn more about Siemens Energy: Our Commitment to Diversity Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character - no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences. Rewards Career growth and development opportunities Supportive work culture Company paid Health and wellness benefits Paid Time Off and paid holidays 401K savings plan with company match Family building benefits Parental leave

CHEP helps move more goods to more people, in more places than any other organization on earth via our 347 million pallets, crates and containers. We employ approximately 13,000 people and operate in 60 countries. Through our pioneering and sustainable share-and-reuse business model, the world's biggest brands trust us to help them transport their goods more efficiently, safely and with less environmental impact. What does that mean for you? You'll be at the frontline of CHEP in a busy, demanding job. Our supply chain team isn't part of our business. It's the heart of our business. And you can be the power behind it. We connect 300,000 supply chains for some of the world's biggest and best-loved brands. You'll learn new ways of working, with automation and new technology that'll help you get the job done - and work smarter. Your safety is our number one priority. The team will welcome and respect you for who you are and will support you throughout your journey of growth and accomplishment. In return, we want you to be hands-on, roll up your sleeves and get stuck in. Job Description Are you ready to be part of a team that values safety, continuous improvement, quality, and employee well-being? CHEP is looking for an Industrial Maintenance Technician to join our Kilgore, TX team. If you have experience in an industrial setting, are comfortable using various power tools, have strong work ethic and a desire to grow your career, the Industrial Maintenance Technician position with CHEP could be a great fit! Split shift, Monday-Friday 11:00am-7:30pm $18.00/hour, Weekly Pay with Direct Deposit Full benefits available on your First Day! (Medical, Dental, Vision) Low-cost benefit plans (Medical starts at $7.15/week, Dental starts at $1.85/week, Vision is FREE) Accrued Paid Time Off available for use after 90-days of employment FREE company-paid vision, short-term disability and life insurance FREE company-provided PPE and safety equipment 401k with company match (up to 4%) Tuition reimbursement, wellness incentives, commuter benefits, profit sharing, parental leave, and MORE! Position Purpose As a proactive team member, working varying shifts, the Industrial Maintenance Technician (IMT) is responsible for performing plant maintenance under the direction of the of the Industrial Maintenance Manager/Plant Manager or their designee. Maintenance activities must ensure that employee health and safety, product safety, and the protection of the environment are never compromised, and that all maintenance activities enhance product quality, plant performance and business priorities. The Industrial Maintenance Technician will adhere to all health and safety policies and directives and maintain a clean safe work area. Major/Key Accountabilities Equipment Diagnostics and Preventative Maintenance: The IMT will also assist with diagnosing and repairing mechanical failures in all plant manufacturing equipment. This includes, but is not limited to, conveyers, process pallet handling machines, dismantling, painting and stenciling systems. The Industrial Maintenance Technician will assist with and, at times, be responsible for hands on maintenance, troubleshooting and repair of all plant pneumatics, hydraulics, and electric systems. Documentation and Scheduling: The IMT is responsible for accurate and timely documentation of performance and processes as required by local and regional leadership. The IMT will assist with and at times will be responsible for scheduling, executing and properly documenting work orders within the corporate Computerized Maintenance Management System (CMMS). Other Duties: Industrial Maintenance Technician will participate in health and safety programs including council or committee meetings, OSHA and corporate mandated training, certification and recertification. Complete training programs as assigned. And any other duties as assigned. Qualifications Ability to stand and walk on concrete floors for up to 12 hours and lift 75 pounds. Ability to negotiate stairs, ladders, and tight spaces. Ability to use fine motor skills such as twist, grasp, turn, etc. small and difficult to reach objects. Ability to read and write English. Ability to read and use mechanical and electrical schematics for troubleshooting preferred. Ability to use an electrical multi-meter for troubleshooting preferred. Experience 1-2 years of experience working in an Industrial, Automotive, Logistics or similar environment. History of effectively working in a team environment. Demonstrated success handling multiple high priority tasks, in addition to normal responsibilities. Skills & Knowledge Accountability Active Listening Compressors, Vacuum Pumps and Related Equipment Computer Literacy Critical Thinking Data Analysis Data Literacy Decision-Making Drawings and Schematics Electric and Electronic Controls Electric Motors Fans, Blowers and Supporting Ductwork Interpersonal Lubrication Types and Systems Machining (Lathes, Milling, and Drill Presses) Managerial Confidence Mathematic Literacy Mechanical Literacy Pipe Systems and Valves Pneumatic and Hydraulic Systems Power Transmission Systems Time Management Verbal Communication Welding, Brazing and Soldering Written Communication Physical Requirements Lift and carry tools 25- 35 lbs Lifts/carries approximately 20ft to tool area Working Conditions The role involves working in a warehouse or manufacturing environment. Prolonged periods of standing with occasional walking Exposure to noise, dust, and varying temperatures may occur. Personal protective equipment (PPE) required Languages English - required Spanish - desired We are an Equal Opportunity Employer and we are committed to developing a diverse workforce in which everyone is treated fairly, with respect, and has the opportunity to contribute to business success while realizing his or her potential. This means harnessing the unique skills and experience that each individual brings and we do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class. Individuals fraudulently misrepresenting themselves as Brambles or CHEP representatives have scheduled interviews and offered fraudulent employment opportunities with the intent to commit identity theft or solicit money. Brambles and CHEP never conduct interviews via online chat or request money as a term of employment. If you have a question as to the legitimacy of an interview or job offer, please contact us at .

JLL empowers you to shape a brighter way. Our people at JLL and JLL Technologies are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you've got deep experience in commercial real estate, skilled trades or technology, or you're looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Sign-On Bonus Details: Sign-on bonuses available for qualified candidates based on experience and expertise. Bonus eligibility and amounts are determined during the final stages of the interview process and may vary by candidate. Location Requirement: Successful candidates must establish residency in or near Abilene, TX to fulfill the in-person requirements of this position. Data Center Building Engineer What this job involves - The Data Center Operations Engineer is responsible for delivery of best practice systems and problem resolution on all data center electrical and mechanical infrastructure (UPS, MV electrical systems, generators, cooling systems etc.) What is your day to day? Responsible for maintaining, monitoring, and performing preventive maintenance and continuous operation of all building systems to maintain 100% Up-time including: fire/life safety, mechanical systems such as (HVAC, chillers, crac, crah, plumbing, controls), electrical including emergency backup systems such as (lighting, UPS, ATS, STS, PDU, generators, primary switchgear, power distribution, transformers), and hot water systems. Monitors operation, adjusts, and maintains refrigeration, chilled water, and air conditioning equipment; boilers, and ventilating and water heaters; pumps, valves, piping, and filters; other mechanical and electrical equipment. Must record readings and make and adjust where necessary to ensure proper operation of equipment. Requires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action as required. Comply with departmental policy for the safe storage, usage, and disposal of hazardous materials. Maintains a clean and safe workplace. Learn and understand the data center site in-order to manage incidents and events that put the critical systems at risk. Work order management, including CMMS, Vendor Management, and Customer Facing Tickets. Understanding and complying with emergency escalation procedures. Perform additional job duties as required. Physical Work Abilities & Requirements: This position requires frequent walking, climbing, bending, kneeling, lifting, stooping, and working/extending overhead, including: Walking large, campus-like settings. Lifting a minimum of 50 lbs. Climbing stairs and navigating rooftops to access equipment. Using ladders up to 30 ft and working from heights. Ability to Climb a ladder with a 300-lb weight limit. Must be able to work different schedules. Must be able to work Holidays. Must be able to respond to site emergencies. Desired experience and technical skills Required 2+ years experience working in a data center/critical facility. Experience with building systems, including: UPS systems, emergency generators, and switchgears. Demonstrated verbal/written communication skills. Working knowledge of computer applications including MS Office (Word, Excel, Outlook), Google Suite and CMMS. Preferred Corrigo experience Universal EPA 608 certification Trained in NFPA70E This position does not provide visa sponsorship. Candidates must be authorized to work in the United States without employer sponsorship. Location: On-site -Abilene, TX Job Tags: Building Automation Systems, Computerized Maintenance Management Systems (CMMS) If this job description resonates with you, we encourage you to apply, even if you don't meet all the requirements. We're interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: 401(k) plan with matching company contributions Comprehensive Medical, Dental & Vision Care Paid parental leave at 100% of salary Paid Time Off and Company Holidays Early access to earned wages through Daily Pay At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing. JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL's recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our Candidate Privacy Statement . For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy here . Jones Lang LaSalle ("JLL") is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process - including the online application and/or overall selection process - you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our Contact Us page > I want to work for JLL. Accepting applications on an ongoing basis until candidate identified.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: Performs entry to mid-level break-fix & preventative maintenance. This includes but not limited to: adjusting functional parts of devices and control instruments to sustain and improve operations; repairing or replacing defective parts; reconditioning or repairing machine tools. Identifies needed parts, supplies, and repair items. Provides support and back up for other members of department as needed by leadership. Is aware of Maintenance Industry Standards. Assures compliance with 5S and housekeeping standards. Participates in CI activities - processes, results and cost savings. May be required to setup and operate simple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform basic welding tasks. Updates records and reviews CMMS history. Performs basic troubleshooting of control systems circuitry. Completes technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus or 18 months of related experience in general industry or successful completion of the ATS Technician Progression Program. Understanding of basic electrical and mechanical systems. Can perform repairs. Must be able to use basic hand tools. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: Performs entry to mid-level break-fix & preventative maintenance. This includes but not limited to: adjusting functional parts of devices and control instruments to sustain and improve operations; repairing or replacing defective parts; reconditioning or repairing machine tools. Identifies needed parts, supplies, and repair items. Provides support and back up for other members of department as needed by leadership. Is aware of Maintenance Industry Standards. Assures compliance with 5S and housekeeping standards. Participates in CI activities - processes, results and cost savings. May be required to setup and operate simple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform basic welding tasks. Updates records and reviews CMMS history. Performs basic troubleshooting of control systems circuitry. Completes technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus or 18 months of related experience in general industry or successful completion of the ATS Technician Progression Program. Understanding of basic electrical and mechanical systems. Can perform repairs. Must be able to use basic hand tools. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Requisition: ST Title: Student Employee-Engineering Technology-Research Assistant Employee Class: Student Employee College Work Study Position: No Department: Dept of Engineering Technology Division: Division of Academic Affairs Hours per week: No more than 20 hours per week until August 22, 2025. Maybe renewed for FALL semester. Hiring Rate: $12.00-$14.00 per hour Preferred Student Classification: One graduate and one undergraduate Nature & Purpose of Position: This grant is funded by the USDA and focuses on developing an AI-driven Large Language Model (LLM) and a mobile application that will be used to educate farmers. The model will assist farmers in learning and identifying harmful insects, providing mitigation strategies, and promoting sustainable pest management practices. The project will require some knowledge in natural language processing (NLP), machine learning, and python programming . Hired personnel should have some experience in data curation, and the ability to translate scientific knowledge into practical, farmer-friendly educational content. Other Requirements for the Position: Background in programming skills, Python is a must. Please submit one page explaining your previous work in programming. Open Date: 05/19/2025 Position Number: 9N9944 Contact Name & Title: Dr. Syed Hasib Akhter Faruqui, Assist Prof - Engineering Design Contact Phone: Contact Email: Contact Building & Room #: Pirkle 324 EEO Statement: Sam Houston State University is an Equal Employment Opportunity employer and Smoke/Drug-Free Workplace. All qualified applicants will receive consideration for employment without regard to race, creed, ancestry, marital status, citizenship, color, religion, sex, national origin, age, veteran status, disability status, sexual orientation, pregnancy, or gender identity or expression. Sam Houston State University is an "at will" employer. Employees with a contract will have additional terms and conditions. Security sensitive positions at SHSU require background checks in accordance with Education Code 51.215. Annual Security and Fire Safety Report

Position Title: Nontenure Faculty Pool - Civil Engineering Program Job Posting Number: NTL Job Location: San Marcos College/Division: College of Science and Engineering Department/School: Ingram School of Engineering Position Description : The Ingram School of Engineering seeks to develop a pool of candidates for possible temporary/nontenured faculty positions to teach in the Civil Engineering Program. For information about the Civil Engineering program please visit Temporary/nontenured faculty are appointed to teach one to four courses per semester. Teaching appointments are based upon student demand on a semester-by-semester basis. Eligibility for annual reappointment is contingent upon satisfactory annual performance evaluations during the term period, in addition to continuity of funding and school need. Successful candidates will teach at the San Marcos campus. This posting is for the spring 2025 and summer 2025 semesters. Please note that this posting is not intended to convey that such a need currently exists. Applicants applying for this pool faculty position will be available to the Civil Engineering Program search committee for consideration in case the need arises. Required Qualifications: A minimum of a master's degree in Civil Engineering or a closely related engineering field. Strong academic background in structural engineering Excellent written and oral communication skills. Preferred Qualifications: A Ph.D. in Civil Engineering or a closely related engineering field. Previous experience teaching undergraduate/graduate engineering courses as the instructor of record. Expertise with Technology-Enhanced Infrastructure. Industry and/or government experience. Application Procedures: The Civil Engineering program within the Ingram School of Engineering will accept applications from qualified applicants on a continual basis. Only applications submitted through the Texas State University website will be accepted and considered, . Interested individuals should submit a current CV, letter of interest outlining specific academic and professional experiences relevant for appointment, unofficial transcripts, statement of teaching interests and teaching philosophy. As part of our application process, we are also requesting contact information for three (3) academic references who can provide information about the applicant's skills and experiences. Please provide the names and email addresses for your academic references in the Reference Letter section of the employment application. Candidates selected for hire will be required to provide official transcripts from all degree granting universities. Type of Position: Temporary Full-Time or Part-Time Review Date : 05/31/2025 Open Until Filled?: Yes Legal Notices: Texas State University is committed to a policy of non-discrimination and equal opportunity for all persons regardless of race, sex, color, religion, national origin or ancestry, age, marital status, disability, veteran status, or any other basis protected by federal or state law in employment, educational programs, and activities and admissions. Employment with Texas State University is contingent upon the outcome of record checks and verifications including, but not limited to, criminal history, driving records, education records, employment verifications, reference checks, and employment eligibility verifications. This position may conduct research on critical infrastructure depending on the research focus of a hire. Consistent with the requirements of the State of Texas, individuals conducting research on critical infrastructure will be subject to pre-employment, and then subsequent routine background checks/cybersecurity screenings. Employment will at all times be contingent upon the successful completion of these screenings in accordance with State and University requirements. Applicants must be authorized to work for any employer in the United States. The University will not sponsor or assume sponsorship of any candidate requiring a petition for a H1B employment visa. Reasonable Accommodation: If you experience accessibility issues or require alternative formatting during the application process due to a disability or underlying condition, we request that you contact Talent Acquisition for assistance. A representative from Talent Acquisition will respond to you as soon as possible. Record Checks and Verifications: Employment with Texas State University is contingent upon the outcome of record checks and verification including, but not limited to, criminal history, driving records, education records, employment verification, reference checks, and employment eligibility verification. Eligibility for Employment: Proper documentation of identity and eligibility for employment will be required before the hiring process can be completed. Why Work at Texas State?: Texas State University is home to more than 38,000 students and 2,000 faculty members in the growing Austin-San Antonio corridor. A member of the Doctoral Universities: Higher Research Activity Carnegie classification, the university creates new knowledge, fosters cultural and economic development, and prepares its growing student population for the endless possibilities that await them as citizens of Texas, the nation, and the world. Bolstered by research with relevance and innovation in creative and scholarly work in a full range of academic disciplines, Texas State seeks outstanding candidates for a variety of faculty positions. Quick Link:

Position Title: Open Rank, Faculty of Instruction, Construction Management Job Posting Number: NTL Job Location: San Marcos, Other - Online College/Division: College of Science and Engineering Department/School: Department of Engineering Technology Position Description : The Department of Engineering Technology is seeking applicants to fill two non tenure-line positions in the Faculty of Instruction or Faculty of Practice lines, at the rank of Professor, Associate Professor or Assistant Professor to teach in the expanding online Master of Science program in Construction Management at Texas State University, and the new (pending approval by the Southern Association of Colleges and Schools Commission on Colleges) online PhD in Construction Management. Both programs can be completed 100% online. Applicants with expertise in all areas related to construction management are invited to apply, with particular consideration given to candidates with experience teaching in an online mode of delivery, and with research interests in construction management, construction engineering, or civil engineering. This position is remote-work eligible. The individual selected for this position will be expected to teach masters and doctoral level courses, and some undergraduate courses, as departmental needs require. Other responsibilities include service to the department and the university, industry outreach, mentoring graduate students and general academic and career advising and assistance. The selected candidate will be given the appropriate rank based on college and university standards and polices. This position is subject to the availability of funds. Required Qualifications: Required Qualifications for all ranks: An earned doctoral degree in Construction Management, Construction Engineering, Civil Engineering, or a closely related field An undergraduate degree in Construction Management from an ACCE or ABET accredited institution, or in Construction Engineering or Civil Engineering from an ABET accredited institution, or a closely related field from a similarly accredited institution Experience teaching in an online environment Excellent oral and written English language skills For the rank of Associate Professor, in addition to those required above: A demonstrated record of excellent teaching abilities Faculty of Instruction: A minimum of five years of teaching experience at the university level Faculty of Practice: A minimum of five years of construction industry experience For the rank of Professor, in addition to those required above: Faculty of Instruction: A minimum of 10 years of teaching experience at the university level Faculty of Practice: A minimum of 10 years of construction industry experience A demonstrated record of leadership or significant contributions in teaching and instructional activities The successful applicant will be offered the appropriate rank and title based on the established standards of the university and the Department of Engineering Technology. Preferred Qualifications: Industry experience in construction management or construction engineering Ability to develop new course content and teach in a fully online environment Professional certification and/or licensure in a related discipline Application Procedures: Only applications submitted through the Texas State University website will be accepted and considered: To ensure full consideration please submit the following by December 2nd, 2024: -Cover letter addressing the required and preferred qualifications -Curriculum Vitae -Statement of Teaching Philosophy -Unofficial Transcripts (all in one document) The selected candidate will be required to provide official transcripts from all degree-granting universities. Type of Position: Full-Time Posting Date: 10/21/2024 Review Date : 12/02/2024 Open Until Filled?: Yes Legal Notices: Texas State University is committed to a policy of non-discrimination and equal opportunity for all persons regardless of race, sex, color, religion, national origin or ancestry, age, marital status, disability, veteran status, or any other basis protected by federal or state law in employment, educational programs, and activities and admissions. Employment with Texas State University is contingent upon the outcome of record checks and verifications including, but not limited to, criminal history, driving records, education records, employment verifications, reference checks, and employment eligibility verifications. This position may conduct research on critical infrastructure depending on the research focus of a hire. Consistent with the requirements of the State of Texas, individuals conducting research on critical infrastructure will be subject to pre-employment, and then subsequent routine background checks/cybersecurity screenings. Employment will at all times be contingent upon the successful completion of these screenings in accordance with State and University requirements. Applicants must be authorized to work for any employer in the United States. The University will not sponsor or assume sponsorship of any candidate requiring a petition for a H1B employment visa. Reasonable Accommodation: If you experience accessibility issues or require alternative formatting during the application process due to a disability or underlying condition, we request that you contact Talent Acquisition for assistance. A representative from Talent Acquisition will respond to you as soon as possible. Record Checks and Verifications: Employment with Texas State University is contingent upon the outcome of record checks and verifications including, but not limited to, criminal history, driving records, education records, employment verifications, reference checks, and employment eligibility verifications. Eligibility for Employment: Proper documentation of identity and eligibility for employment will be required before the hiring process can be completed. Why Work at Texas State?: Texas State University is home to more than 38,000 students and 2,000 faculty members in the growing Austin-San Antonio corridor. A member of the Doctoral Universities: Higher Research Activity Carnegie classification, the university creates new knowledge, fosters cultural and economic development, and prepares its growing student population for the endless possibilities that await them as citizens of Texas, the nation, and the world. Bolstered by research with relevance and innovation in creative and scholarly work in a full range of academic disciplines, Texas State seeks outstanding candidates for a variety of faculty positions. Quick Link: